1997 GMC C1500 gets a Rough Country lift kit and 35s ….
Vložit
- čas přidán 29. 08. 2024
- 1997 GMC Sierra gets a 6 inch Rough Country lift and some new shoes…. Lifted on 35s .. I hope you guys enjoy this video, please like and subscribe to the channel. Also go check out Rough Country.
Link to rough country
www.roughcount...
Dashskin
dashskin.com/2...
www.googleadse...
CZcamsrs to follow
@TrucksandWater @Str8sixfan @LaceyBlair
@cuzzintruck2 @TheHoonigans @RoughCountryTV
@DurtymaxJack @DMAXRYNO @ONDGAS
@senditsteve8206 @DrivenByVision101
Key words
C1500 lifted 1996 1997 1998 1996 1995 1994 1993 1992 how to lift
Rough country
Installation
Gas prices
How to get better MPG
Finally someone who understands how to properly show the stance Thank you
This is how I want mine to sit. You said it best, looks like a truck. With how large these newer trucks have gotten, Ive gotten spoiled on the larger size, I want to feel like my old truck is keeping up
Looks great…should’ve swapped for 6 lug 2500 rotors and a k1500 or 2500 rear axle to avoid the spacers.
truck looks good way it was but dam that lift and tires makes that truck look good too!!!
now it's easier to change the oil🤗
Love that my 91 k1500 is lifted, I do everything in the driveway
Mines a 2wd 93 and only lifted it because the roads where I live are TRASH amd cant risk bottoming out on my resto daily project
Link for the wheel adapters plz .
Yea its a 6 inch lift it says in the caption.. looks good
I’m doing the same with my GMC 1500. I never heard of a ball joint drop before. Curious why do you do this. Does it add more lift or does it help getting more camber or just provide more clearance?
hey I got a 1995 c1500 I'm going with a 4 inch lift but do I need to lift the front first to rear level so when I put my lift kit on its all leveled or how would I go about doingthay
So you lifted front and rear both 6 inches ? How is it so level afterwards, the fronts on these trucks sit lower than the rears naturally. Im confused, i want to do this to mine but dont know which lift kit to get lol
these kits are usually marketed as lift and level
Swap the rear axle and the front rotors... would be way more safer... rear axle will have a beefer axle shaft and the right gearing
Nice looking truck 🛻
So their new kit instead of coming with spindles comes with control arm lowering brackets and the rear also comes with an extra leaf
How much did this cost to install, I got a 1990 stepside Silverado regular cab and got the 3 inch lift kit from rough country I just haven't had it put on yet
by chance do you know how wide where the spacers?
How did you guys put the shocks in? I’ve ordered replacement shocks, and they don’t fit through the bottom hole of the control arm.
Wheel spacer link?
I wonder how hard it was to align
Where did you get the plastic protector for the bed rails?I've been struggling to find for a stepside chevy or maybe I just don't know how to search. Either way it would help.
Do the instructions call for that upper ball joint to be mounted underneath like that? Looks kinda wrong to me… but 🤷♂️
You are correct , That is 100% installed wrong
@@toughflyer looked up the RC 6” lift on their website for this truck and it does picture what appears to be ball joint spacers included in the kit, so I suppose that’s how it’s supposed to be but I personally wouldn’t mount my ballpoints underneath like that.
never use wheel adapters kids
Been using My for 4 years now, no problem so far
How big were the rear blocks?
GOOD DAY PLEASE SEND ME THE LINK FOR THE WHEEL SPACERS PLEASE 😊😊😊😊😊😊😊😊
Did you run the ball joint spacer that lift came with?
What size of lift tho?
What inch spacers are the front and rear?
How much money u spent on everything?
I have 95 just like yours but black.
What gear ratio are you running with the 35s
Can I know the name of the rims and the size?
Are those 17x10?
Just ordered. Will I have to get longer brake lines
Is that a 2 wheel drive and what kit module is that
2957017 is only 33.25 x11.5x17
Just saying though spacer are sweet though
Lifting a two wheel drive truck is like lifting a Prius, don't make no cense. Looks good but can't go anywhere. To each their own I guess.
He mentioned putting the link for the wheel adapters/spacer but I dont see it....plus this questioned has been asked a lot of times and still no answer......
www.motorsport-tech.com/index.html
@@an_auto_addiction5742 Much Appreciated 😁
What was the size to the wheel spacers
Is the spring the same size?
Upper ball joint is not installed right 😂
What size spacers
Why didn’t y’all just put the 2500 half ton 6lug rotor on ?
To space out the tires with out having to but the rotor and spacers
whats the part number on the spacers
Where did you get the wheel space from
www.motorsport-tech.com/index.html
4 or 6 inch lift?
What size lift ?
Where did he buy those spacers ???
www.motorsport-tech.com/index.html
Whats the highest u can lift a 2wd?
0
I think 6 in from rough country.
6 inch suspension 3 inch body you can stack a leveling kit in the front so around 10.5 in total
I've never understood doing a lift and big tires on a 2wd. It's like the truck is wearing a halloween costume.
It looks capable, but only one wheel is gonna spin
It’s really simple to understand.
It’s their truck. 😂
Yeah why would anyone lift a 2 wheel drive truck!?!?!?
Why not??
why lift a 2x4 🤣
That is what they wanted. Let’s face it half the 4wd lifted trucks haven’t been off-road. 😆
There's always one clown that asks this question.
The better question is..
Why don't you mind your own business? Is it your truck? No? Then stfu.
He must be a city boy... huh Shaun bunch 🤔... I'm ready to put a lift on my son 95 silverado with a rear locker we live on navajo nation shit dude your funny 😂🤣😆😄
@@YouSoundButtHurt clown is putting a lift and mud tires on a 2wd 200hp chevy
almost looks as good as mines