Faulty Parking Sensors? Here's What I Learned...
Vložit
- čas přidán 10. 03. 2021
- Join me as I work through the various issues that could be causing my BMW parking sensors to go haywire on my 2008 BMW X5 E70. I've narrowed it down to 5 key points to check if you're having similar issues.
What to check:
1. Dirty Sensors - 1:18
2. Error Codes - 1:35
3. Wiring - 2:50
4. De-coupling Ring - 3:34
5. Water Ingress - 4:46
6. Bumper Removal - 6:27
I'm no expert mechanic but I have a passion for all things motoring and this channel is all about the community sharing their experiences, hacks and fixes so we can all benefit.
Music released by Carbon Citizens
Original Upload: • Carbon Citizens - M.4....
Click Here To Stream On All Platforms: fanlink.to/CCallstream
Items featured in my videos:
Pry tool kit: amzn.to/3l5e1vk
WD40 with flexible straw: amzn.to/2N5AP1y
Lumix GX80: amzn.to/2PKIyTG
BBQ Beef Hula Hoops: amzn.to/2N6UhuR
Dinosaur headphones: amzn.to/3vbLXLz
By clicking on one of these links, the channel GEE’s Drive may receive a commission if you make a purchase. This will directly support the channel development, Thank you. - Auta a dopravní prostředky
Small update 10 months later: Beeping has come back. Pressure washer is definitely the culprit. In the last wash, I forgot to stay back from the sensors with the spray. Lesson learned.
Hi! You, Sir, are incredibly helpful. Thank you SO much for posting this!! ❤️ I was on my way home during a sad but pesky snow storm. (It wasn’t the amount I wanted, it was not enough lol) My front censor went on non-stop for over a minute - which feels like FOREVER because it’s so loud. Snow of something kicked up and stuck on it. I’ve cleaned the rear censors before only because I couldn’t see behind me, but not the front. lol. So annoying and you saved me! Yay!! My Hero! Thank you again!!
Glad it helped sir! It seems the sensors don't like getting soaked, after a recent downpour of rain mine started beeping again. All the best 👍
Thanks for the video. Step 5 in your research is definitely the most common problem, sensors getting wet. After a recent downpour of rain, I got a "service parking sensors" alarm on my dash screen (2017 RAM 3500 HD truck). This happened once before but cleared itself once the truck completely dried out. I saw another CZcams video where spraying a bit of WD40 directly into the sensors right on the bumper, using a rag to wipe away any excess, cures this problem rather quickly. The WD40 drives out any moisture trapped inside the sensors. Easy fix without having to remove anything, much less the entire bumper. This works on all parking sensors on most any vehicle. Hope this helps. .
Great insight, thanks Phil. It seems water is the most common cause. Worth having a spare can of WD40 in the car for perking sensor emergencies!
That WD-40 trick worked for me on my 2013 Cadillac XTS. 👌🏽
Awesome, nice work 😎
Useful advice. Thanks for sharing 👍
well explained,
One million thanks!!! The WD40 worked great!!!
Glad it helped!
My Volvo V60 (2019) started playing up (the sensors) Washed it, tried WD40 but still playing up like continuous sound or intermittent when nowhere near anything or not going off ata ll or very late when approaching a wall or another vehicle. Volvo main dealer narrowed it down to a spider/web but unfortunatley that did not cure it either. So its back to the dealer again as this is warranty work. But thanks for the video
Awesome video. Wish I’d found it last year when I replaced all my sensors (still didn’t fix it but did stop the continuous beep). Will have another go this weekend to see if I can get working.
Thanks! It's come back on mine after a few months. Definitely caused by water, WD40 seems to help for a while. Hope you get it sorted 👍
Actually OBD 2 code reader will NOT display any code. And after a while I showed rear park assist fault on screen but still no code.
This is super helpful, thanks. I think one of my front parking sensors has been damaged by a stone hitting it whilst I’ve been driving as there’s a chip on it, so I need to replace it as I currently get the continuous beep. Garage quoted £400 - sounds like an easy fix to do myself though thanks to your video saving me a heap of cash !
That's good to hear. As DIY jobs go it's quite easy removing the bumper, well on the SE spec it is. Good luck 👍
Do you have to reset the system after changing the sensor ?
Don't think so, unless it's stored a sensor error which I didn't have.
My sensors sound the alarm but no longer displays car model on screen, anybody have experience with this issue?
Заменил 3 датчика pdc,в Rheingold блок PDC , горит зелёным, но парктроники все равно не работают: Pdc failure, обратитесь в сервис.. Что может быть? Правда смотрел, живые вроде..
Could be an issue with the module in the rear then maybe?
@@GeesDrive I sorted it out, everything seems to be fine there. may be due to the fact that some sensors did not install original..