I have a important question to ask ......Does all the "install" videos for the Ruger PC carbine apply also for the PC charger ......I just ordered a PC charger and want to upgrade everything factory with your products but I'm curious if the cabine install also apply for the charger ....Thank you for answering and I look forward to purchasing and reviewing your products
I believe I have all your PC Carbine products and love them. Your Trigger Group Pins are on my radar. I have seen videos on CZcams where shooters have complained about the factory ejectors and was thinking your group could come up with a stronger ejector. I have just put around 600 rounds through my PC and haven't had any problem but running with your extractor might make all the difference. In closing I have to say between your trigger design and the spring kit my trigger is the bomb, just at 3 lbs. and almost stops at the break! Thanks.
Hey Chris, I got all your products in my PC Carbine. I was wondering if you can make a front sight that has a tritium insert, or a high visibility post, but still have the protective wings that the OEM front sight has. Thank you again for making great reliable products.
Hey Dan! Glad you mentioned this one. We've had this on the list for some time. Even designed it but didn't go any further as we weren't sure you guy still wanted it! Keep asking and we will make 'em!
Have all your parts for the new Ruger. Good stuff. One thing disappointing about this gun is the length of the barrel pic rail. Anyone using this in the shooting sports is going to mount their optic there to maintain zero when removing the barrel so much. It easily could have been 1/4 longer to except larger optics since the hand guard is 3/16 clear at the rear and 1/16 clear in front. I have the Holosun 510c and it is not centered and one end is just catching the rail by .06. Will work but not good. 1/4 centered longer rail might be something to consider. Eotech and other large optics probably have this same problem.
The first time I disassembled mPC Carbine for cleaning, the bolt hold open pin dropped out, the bolt hold open was pushed out by the spring, and the spring launched, never to be seen again. Roger sent me a new spring.
Hey Chris, Would a Sig P226 mag well insert make any sense? Your Kel-Tec Sub 2000 mods are excellent and make that a fun, handy, little rifle. I live in a restricted state and would welcome the opportunity to use my expensive pre-ban mags in another PCC. Keep up the good work!
A Sig P226 mag well would be a great idea. Also, get into the P226 aftermarket business please. I have purchased many many of your parts for various firearms and would love to add my P226 to the list. Thank you.@@MCARBO
hey dude did y'all come up with the trigger for the hipoint pcc.... I'm wondering cuz I'm gettin y'alls spring kits friday n i wanted to get them all together cuz u know it's a task to take these down
MORE PC CARBINE UPGRADES!
www.mcarbo.com/ruger-pc-carbine-accessories.aspx
I have a important question to ask ......Does all the "install" videos for the Ruger PC carbine apply also for the PC charger ......I just ordered a PC charger and want to upgrade everything factory with your products but I'm curious if the cabine install also apply for the charger ....Thank you for answering and I look forward to purchasing and reviewing your products
I believe I have all your PC Carbine products and love them. Your Trigger Group Pins are on my radar. I have seen videos on CZcams where shooters have complained about the factory ejectors and was thinking your group could come up with a stronger ejector. I have just put around 600 rounds through my PC and haven't had any problem but running with your extractor might make all the difference. In closing I have to say between your trigger design and the spring kit my trigger is the bomb, just at 3 lbs. and almost stops at the break! Thanks.
Awesome! Glad to hear it John! Will see what we can do to improve the ejectors. I completely agree. It's a major issue.
I'm buying this and waiting for you to do the same for the 10/22! I know you will!
Roger that! Will do! Thank you for your Support.
@@MCARBO what about this 10 22 and tippmann
Hey Chris,
I got all your products in my
PC Carbine. I was wondering if you can make a front sight that has a tritium insert, or a high visibility post, but still have the protective wings that the OEM front sight has.
Thank you again for making great reliable products.
Hey Dan! Glad you mentioned this one. We've had this on the list for some time. Even designed it but didn't go any further as we weren't sure you guy still wanted it! Keep asking and we will make 'em!
Have all your parts for the new Ruger. Good stuff. One thing disappointing about this gun is the length of the barrel pic rail. Anyone using this in the shooting sports is going to mount their optic there to maintain zero when removing the barrel so much. It easily could have been 1/4 longer to except larger optics since the hand guard is 3/16 clear at the rear and 1/16 clear in front. I have the Holosun 510c and it is not centered and one end is just catching the rail by .06. Will work but not good. 1/4 centered longer rail might be something to consider.
Eotech and other large optics probably have this same problem.
The first time I disassembled mPC Carbine for cleaning, the bolt hold open pin dropped out, the bolt hold open was pushed out by the spring, and the spring launched, never to be seen again. Roger sent me a new spring.
Thanks Monte, glad to hear we're not the only ones! New Pins hold everything together nicely!
Same exact thing happened to me. You have to push the bolt forward once you've taken off the barrel to prevent this from happening.
ill get a 303 pin kit ive been upgrading gradually that pin falling out drives me crazy
Hey Chris,
Would a Sig P226 mag well insert make any sense?
Your Kel-Tec Sub 2000 mods are excellent and make that a fun, handy, little rifle. I live in a restricted state and would welcome the opportunity to use my expensive pre-ban mags in another PCC. Keep up the good work!
Thanks Brother for suggesting this. We're still working on mag well inserts. Should be able to pick it up again soon. Keep checking back.
A Sig P226 mag well would be a great idea. Also, get into the P226 aftermarket business please. I have purchased many many of your parts for various firearms and would love to add my P226 to the list. Thank you.@@MCARBO
Get to the point from the get go
Where can you get that exact Rugar pc, the only one I can find is with a hunting rifle style stock.
We can order them....give us a call. 727-223-1816
yeah dude they pop out lile the old 10/22 vipers did. ......man that was my fav squirrel gun i ever had
Thanks Brother, glad we're not the only ones experiencing this. Love this improvement. Small details but nice when it all fits together perfectly.
hey dude did y'all come up with the trigger for the hipoint pcc.... I'm wondering cuz I'm gettin y'alls spring kits friday n i wanted to get them all together cuz u know it's a task to take these down
I lost my bolt stop pin
Call into our Tech Dept. They should be able to help you out. (727)223-1816
@@MCARBO Have you tested the extra power recoil spring with the Ruger PC Charger yet? Please test it with 147 grain ammo.