Chamberlain 953EV Garage Door Opener Remote Programming Video
Vložit
- čas přidán 28. 08. 2024
- Programming/install your Chamberlain garage door opener Keychain Remote with Visor Clip (953EV/EVC) with this easy to follow video. LiftMaster remotes use the same programming steps. See chart below for extra information.
Get a Chamberlain 953EV remote RIGHT HERE!
amzn.to/2Lhb0rE
ID CHART
Color of Learn Button
Frequency
Number of Presses
Yellow
SEC+2.0 Tri-band (310Mhz, 315Mhz, and 390Mhz)(Rolling Code)
1
Purple
SEC+ 315Mhz (Rolling Code)
2
Red/Orange
SEC+ 390Mhz (Rolling Code)
3
Green
Billion Code 390Mhz
4
1. Take the visor clip off and use the clip to press the program button on the back of the remote until the LED light on the front of the remote turns on.
2. Press and release the learn button on the garage door opener motor.
3. Press and release the remote button you wish to program ___ times, as indicated above.
4. Press either of the other 2 buttons on the remote to exit programming mode.
5. Press the programmed button to test. The door should activate.Chamberlain 953EV 3 button visor style remote. Program three different Chamberlain remotes into one unit. Works on all Liftmaster, Chamberlain, Sears units from 1993 to present. Chamberlain 953EV 3 button visor style remote
Program three different Chamberlain remotes into one unit.
Works on all Liftmaster, Chamberlain, Sears units from 1993 to present
product substituted with equivalent Liftmaster professional unit
Longer range
LED signal
Easy programming
Includes Battery
If this video was useful please give me a LIKE!!
This video was edited with Wondershare Filmora
If this video helped you out and saved you a service fee, please feel free to SUBSCRIBE to my cause.
I'd love to hit 100k subs before Im 90 years old. 😂
I know this video is 6 years old, but YOU ARE THE MAN. I've watched so many videos, and none of them worked. I was missing the program the remote portion. Once I did that for a red button, it worked. A thousand thanks
The video is an oldie but a goodie still in 2024!
I really appreciate the awesome feedback.
Thank you. Wish I had started here. Spent 2 hours trying to get the remote and opener connected yesterday, was ready to return the remote. Watched your video, not even to the end, and in less than 5 minutes I was up and running.
@@lisatrace4123 that's awesome! Thanks for the comment 🙂.
This was a great help. Others failed to point out the button under the remote clip. This step was not mentioned in the owners manual of cheap remote. Thank you very kindly
@@gregcabral201 I'm glad I could make the programming process make sense and work!
Thank you for the awesome feedback ☺️.
You were MUCH easier to understand than even the CHAMBERLAIN site! I was going in and out of the house to the garage trying to understand the instructions. I thought I'd try another CZcamsr, who speaks ENGLISH! You Done Good!
Thank you Susan!
This guy did a great job. I programmed two remotes in less than a minute. There was no fluff, right to the point.
@@user-mr4dt8ml6x thank you for the awesome feedback! I really appreciate it 🙏🏼.
Thank you! I have been getting out of car for two years. MN winters no less. Was at Home Depot and stumbled across the garage door openers. Instructions in the box were not clear. Found your channel and wa la - 2 openers programmed in 2 min. Thank you !!!🎉
That's awesome! 👍🏼💯
Thanks! That was SO much simpler than that truly horrible Chamberlain video (which was so busy qualifying everything that it was impossible to follow). Pretty straightforward when you get right down to it:
- before you start, identify the wire/button color on the opener (purple for me) which will determine the number of presses below
- put the remote in program mode by pushing its program button
- press the remote button you wish to program the number of times needed (2 for purple), then press another button
- on the opener, press the learn button
- on the remote, press the same remote button as above (the opener light should flash)
- additional remote button presses should open or close the door
Thanks for the positive feedback Mark. I try to make these videos as easy as possible to follow.
OMG I've been fighting with the supplemental remote i bought for this system for 6 months. Read the manuals watched other videos but nothing worked. Your video solved my problem in under 3 minutes. THANK YOU!!!!!!!!!
That's awesome! Thanks for the feedback. I wish you could have found my video sooner. 👍🏼
The best video on program garage openers.
@@Betterbeing45 I really appreciate the kind feedback! 🤗
Life saver dude thank you!! Unreal it says nothing about programming the remote before you pair it to the opener
@@The-808 I appreciate the comment bud! 👍🏼 I'm glad the video helped.
Huge thanks. The garage door at my other place took 15 seconds to program. At my new place, I couldn't figure it out for the life of me. I remember it being an easy process, but didn't recall exactly what that process was. This video came through. One thing I messed up on was the color. The light was kind of a tennis ball color. I figured that as yellow, and kept trying to press one time. No luck. Then it hit me that it was green. Tried pressing 4 times, and viola!!!!
I'm glad the video helped you out! Thank you for the awesome comment I really appreciate it. 🙏🔥🤘🏼
You rock man! The pre-programming setting of the remote by pressing the back button and using the chart with the color code and the amount of clicks is what I was missing.
Thanks bruh! 💯
I couldn't have done this without your video. I am almost in tears. It's very hot here in California and I was getting frustrated. God bless you. Have a wonderful day
I live to make someone's day! Glad I could help you get unfrustrated. Stay safe out there 🙏.
God Bless- thank you! You saved me on a day I had zero patience left!
Glad to help! 🙂
Great information! Just what I needed to add my opener!
@@PaulEM53 awesome! I really appreciate the comment. 🤗
This is super helpful. I've tried to figure out the remote for more than 6 months until I saw this video
💯❤️
Thanks for the detailed demo. I tried to follow the instructions to no avail. I think I was clicking too fast. You showed how to click, wait and click. Nice job!
I appreciate the positive feedback! 🙏
Your video was much more helpful than the official chamberlain video, good job 👍
Thanks for the comment! 🙏
The most helpful and easy to follow tutorial ever!!! Took me less than 5 mins to do. Thank youuuu!
Glad to help! Thanks for the comment.
i am now a runner up master of garage remotes, all grand thanks to you!
You're very welcome 🙏.
Thanks for watching!👍🏼
I tried all the other tutorial here in youtube and yours works the best and very clear step by step instruction and info. Thank you! You’re the best!
Glad to help, Fely! 🙏
Saved my ass man I was reading instructions and thought they meant the dam LED light color so I was programming the clicker incorrectly thanks man
You're welcome bud! 👍🏼
We went through a thousand videos on how to sync the remote not one video mentioned the little button on the back of the remote really appreciate the video like subscribe to your Channel looking forward to more videos and your video should be put it number one on the algorithm
Thanks for the comment Christopher!
I'm not sure why Google don't put most of my helpful videos at the top of the algorithm. I really try to have a relevant title and tags. I need to figure out how to do better at getting my video's at the top.
The instructions that came in the box are useless. Thank you for this video!
I'm so glad the video helped! Thanks for the comment.
Dude! Thank you! This was so much easier than the manual and other videos. So simple! I almost gave up! Been having this for days and couldn't figure it out! Omg! Thank you so much.
Glad the video helped out! 💯🤘🏼🔥
Not even close to what the manufacturer said to do, but 1000% correct! Thank you so much!
Glad to help! 🙏
Thank you so much for this video! I couldn't figure it out how to program my remote, even after looking at the video on their website, but your instructions were so simple, and it worked the first time!
Thanks for the comment! I really appreciate it. Glad to help.
Thank you so so much! My issue was the light bulb was out. I changed it, followed your instructions and it worked no problem!
🙏
After the 3 minute video, I was able to program the remote in n 30 seconds. Took longer to park the car in the garage than program the remote. Thanks!
You're very welcome!! 🙏
By far the easiest DIY video! Thank you so much 😊
Glad to help!
Thank you for helping the remote program of a garage door opener with a chamberlain or lift master. When I talking out of the clip a remote and I using the clip push down a remotes it on the light red, then I push the button color of a different with the machine and I click the remote but it’s flash by itself and sound the machines Garage door opener. I press remote again went it goes running the garage door open and close. Because I think it’s very easy for remote programming.
Awesome. Try your best a remote the program or using the keypad code too.
Great job...right to the point about first setting the remote button before getting started...thanks.
I guess I just can't read instructions. I was so confused by the learn button mentioned...and you cleared it up!
Glad to help you my friend! 👊🏼💯
Thank you for this!! Now I can get into my new house when locked out.
The Chamberlain video was horrid! Didn’t help at all. It didn’t even tell me to push the button on the back of the opener w clip.
Thanks again.
🙏
Thank God for your video. I must have watched like 6 videos and they skip the the first step. 🤦🏾♂️
I like to be nice and thorough! I really appreciate the feedback. Thanks for watching. 👍🏼🔥
Couldn’t be explain better than you did. Simplest.. Thanks for posting it
I appreciate the positive feedback! Thank you.
Much easier than the company video!
Thank you for the comment!
Wow - I just ordered this for my new car that does not have Homelink built in. I previously ordered the wrong remote due to the PURPLE button being so faded that I thought it might be ORANGE/BROWN, and that clicker did not work (since it was for ORANGE). I found out that the wire hanging down is the same color as the Learn button, and it is PURPLE. I hope this new 953EV remote works and is as easy as you showed. Crossing fingers. Subbed and Liked. Thanks.
Thank you for the sub and like!
Good luck programming. You got this. 🙏👊🏼
@@garagedoorgenius Woohoo - got the new remote today, and after missing a step 3-4 times, I finally managed to get ALL the steps that you told me to do. Thanks for your help.
@@StreakingTiger that's awesome BROH!!
Thanks for watching the video. I appreciate it! 🤘🏼
Dude you were better than the video, which was the same as my instructions. No way in hell that button was purple, but I read your post - and damn if there wasn't a purple wire hanging down. Bingo! thanks brother.
Excellent, I'll give it a try tomorrow. Thank you for taking the time to help me out. You just got a new sub, thank you again.
Anytime my friend! Good luck, you got this. 👊🏼
Holy cow… I am so glad I found your CZcams channel… As easy as it seems I skipped a step every time I tried it before I watched your video… One more time after the video and it is sat... thank you very much
You're welcome Chad. Thanks for watching 😊!
Thank you so much! I had no idea💡 the instructions meant the square ⬜ red button.
This was not the 1st or 2nd remote I've programmed, so... 🙄
I've learned my lesson and in my garage pamphlet drew a square red button to push 3x, because it's too hawt (Mississippi 🔥) to play around in any garage.
I appreciate your simple step by step directions.
You're welcome! Glad to help. Stay cool in Mississippi. That's a different kinda hot from Texas.
I agree. My opener has the purple button. In the past the directions on the back of my Chamberlin Garage Opener worked fine. My new opener required the button under the clip to be pressed as demonstrated in the video but the instructions on the open don't mention it. Very happy to be educated by this video. I was going to return the remote and I am, sure the remote instructions would show it but I have programmed remotes for relatives and house guests for years the old way. I didn't read or keep the remote instructions (my fault) The directions in the video worked perfect. Thank you Garage Door Genius.
@@dalediersing7335 I appreciate the positive feedback!
Wayyyyyyy easier than the chamberlain video. Thank you!!
🙏
Thank you so much this was so much easier than the chamberlain tutorial video, follows the steps with you and had it going in seconds!
No kidding!
Best video so far
Thanks 🙏🏼!
Thank you so much for the video! Clear and concise information
I appreciate the awesome feedback!
Thank you. You saved my day!
Thanks for this video. I couldn’t get it to work at first because I interpreted the red button on the opener as the corresponding color, so had pressed 3 times to program instead of two for purple.
Glad to help 🙂!
Hell yeah thanks i programmed my controller first try!
@@Ecobeast559 BOOYA!! That's awesome bruv! 👊🏼
Thanks for the comment.
Good video, got mine programmed in instantly compared to other videos I was watching 👌
I appreciate the positive feedback! 🙏
Thank you so much I was watch others videos and almost gave up😩 urs was right on time
Glad to help! 🙏
Thank you soooo much for your video! You made it so easy compared to other videos
I really appreciate the positive feedback 🙏.
Awesome work in seconds
Thank you for the comment!
Thank you Mr. Genius. I watch the 2:20 video which I assume was provided by the garage door opener manufacturer. At least it was identified as ChamberlainDIY. You know the one I mean. I watched it several times, but learned nothing. I watched your video once, executed the steps in sequence and everything worked. Just like you said it would. The company ought to hire you to write and record their DIY material. Thanks.
You're very welcome!
Thanks for the kind words.
Thank you for the first step!!!! That’s what we were missing.
You're welcome 😊
Oh man! Thanks very much for the great video! You save me a ton of frustration!
Glad to help, Tom!
Exactly what I needed. Thanks
Glad to help! 👍🏼
You are a pure genius!! My color was yellow 💛 and I was able to program my husband's remote because you showed the chart. Thank you so much. P.S. Chamberlain needs to delete their video.
thank you much..was doing instructions it said nothing about center button..gave up after 1.5 hrs watched your vedio had it programed less than 10 min..thank you
@@Sandy-pt4nl I really appreciate the awesome feedback!
I'm not sure why those instructions are made to not work.
THis is why I love this country. for people like you ;)
BuyCryptoPig
Awe thanks man!
You're welcome!!
Very helpful my guy!! Now have enough enough openers for everyone per door
🙏
Thanks for the video. The wallet card instructions I got with my new openers was terrible.
Thank you Garage Door Genius for the video. Very helpful.
You're welcome!
Thank you sir. You are the Man!
@@kenyattatucker8083 I really appreciate the awesome comment! Thank you 🙏🏼.
easy, peasy. Thank You.
You're very welcome! Thanks for the awesome feedback. 👍🏼
You are the best all other videos were so unclear.
Thanks!
Y made mu day thank u i love smart people like you
🙏
Easy instructions, thank you
I'm so glad it helped! Thanks for the comment.
You saved the day ❤❤❤❤❤
I ❤️ this comment!
Thank you
Your video was very helpful
I appreciate the awesome feedback 🙂!
Thanks so much for this wonderful tutorial video. It was so easy to follow! Really appreciate it!
You're welcome 😊!
Thanks for your video, helped me a lot.
Glad to help! 🙏
Awesome video. Thank you so much for uploading this. Made the job quick and easy!!!
I appreciate the positive feedback! 🙏
Glad to help, Christopher.
Sweet!!! Best video for this!
Thanks!
Great video, I was confused and your video cleared up my questions
Glad to help! Thanks for the comment. 👍🏼
Steve thank you for the donation! That's very nice of you. 🙏🏼
Your right pain in the butt! Thank you. A great simple video simplified this for me. Chamberlain own video didn't make sense.
Glad to help! I appreciate the awesome feedback. 👍🏼
Excellent step by step guidance ! Thank you so much
🙏
THANK YOU SOOO MUCH! I’ve watched a lot of tutorials but yours was the only one that worked. Had no idea there was a button on the back you pressed. The original instructions didn’t mention any of that. Thank you 👏😎
You're very welcome 🙂!
Thank you so much for making it look so easy, I will try this. Thanks!!!
You're welcome! Good luck, you got this. 👊🏼
Took 5 mins. Exactly what I needed lol. Thanks!
You're welcome 😀!
Worked like a charm and saved some money, thank you
You're welcome 😀!
Thanks for this video. Help me out a great deal.
I'm glad the video made the process a little easier for you! Thank you for the comment.
Thank you sooo soo much finally able to get it set up and you explain it so easy now for the other remote.
Life saver 😊 Thank you
You're very welcome! 👍🏼
Worked 100% on point thank you
Glad to help! 👍🏼
Thank you ! So easy
Glad to help! 💯👍🏼
Very quick and simple. Thank you
Very easy and helpful thank you
Thank goodness I found this! Great explanation.
Thanks for watching 😊!
Great tutorial. I was able to program easily after watching. Thanks!!
You're welcome!
Thanks for watching.
Thank you! Not sure how much money you just saved me
MrQuelowhat
Hey no problem and you're welcome!
It just depends on the door company. Some may charge you nothing just to program a remote but I'm sure most will charge at least 30 to $60.
Thank you for your help!
You're very welcome!
Thank youu! I threw away the instructions thinking how hard it can be lol
🤣😂🤣
I appreciate you sharing your wisdom my friend. God Bless! 😎👍
😎🙏
Thanks just used this.
You're very welcome! 👊🏼
Thank you! It works, couldn't get to work follow the instruction
You're welcome 😊!
You are the absolute best my brother!!!! Thank you so much.
Glad to help! 😎
THANK YOU. THANK YOU. THANK YOU.👏
No problem! Glad to help. 👍🏼 Thanks for the comment.
Absolutely perfect thanks for the help 👍
You're very welcome!
Best video I came across for programming the remote. very clear and easy
Andrew Warnes
I appreciate it!! Thanks!!
I have the Chamberlain unit has worked perfectly till I screwed up somehow when the door was opening half way. I will try to follow instructions to program remote again. Can not do it the Light on unit keep blinking remote does not open door, will let you know my experience.
10 blinks from the unit means safety sensors. Make sure they are lined up.