Hi there. Great job on the video. I am currently in the market for a fiber laser and have been looking at Cloudray. Based on your experience would you recommend? Would you mind sharing the configuration you bought and would you have any tips/suggestions for someone about to buy a fiber? Really appreciate your time and input. Thanks.
Thanks John! My experience with my Cloudray fiber laser has been terrific. I do believe that Cloudray is one of the best Chinese manufacturers for fiber lasers, and also has some of the best bang for your buck. For a first time buyer I would recommend either a 30W or 50W machine. Both can do the same things, but a 50W speeds up engraving considerably if you’ll be doing deep engraving work. For a first time buyer I would also generally recommend sticking with a Q-Switched machine over a MOPA machine. The only real difference is that MOPA opens up more possibilities to do colored engraving on stainless steel, but it comes at a considerable price increase. As for laser software, I’d strongly recommend purchasing LightBurn for Galvo, instead of using EzCad. It’s a fantastic software that I can’t recommend enough. Best of luck to you!
SO..... Cloudray told me the stepper driver inside my machine wouldn't properly run my rotary table. My machine came with a driver, because I had a rotary already setup. Do you know the proper way to install the recommended DM860S?
The one thing that he should be guaranteeing after seeing him put those wires together and hearing him talk about opening your machine to do all this excess work he's reassuring that you void your warranty possibly short out your machine yeah I don't think so
If you are not comfortable doing basic electrical work then I would not recommend wiring the rotary table yourself. That being said, there is a very low risk of causing any damage to the laser due to miswiring.
Did you ever finalize your set up for sale? The table insert? Also, do you have a source for your LED light setup?
Nice. Where i can order the led light you have installed to the lens?
Great job, subbed.
Hi there. Great job on the video. I am currently in the market for a fiber laser and have been looking at Cloudray. Based on your experience would you recommend? Would you mind sharing the configuration you bought and would you have any tips/suggestions for someone about to buy a fiber? Really appreciate your time and input. Thanks.
Thanks John! My experience with my Cloudray fiber laser has been terrific. I do believe that Cloudray is one of the best Chinese manufacturers for fiber lasers, and also has some of the best bang for your buck. For a first time buyer I would recommend either a 30W or 50W machine. Both can do the same things, but a 50W speeds up engraving considerably if you’ll be doing deep engraving work. For a first time buyer I would also generally recommend sticking with a Q-Switched machine over a MOPA machine. The only real difference is that MOPA opens up more possibilities to do colored engraving on stainless steel, but it comes at a considerable price increase. As for laser software, I’d strongly recommend purchasing LightBurn for Galvo, instead of using EzCad. It’s a fantastic software that I can’t recommend enough. Best of luck to you!
nice please make wiring nema 34 stepper motor to steeper driver to fibralaser control board
How do i add rotary marking 2
By chance, do you offer that table insert for sale? The one you made to hold the 6 cards?
I do not at this time. Maybe once I refine the design more I would consider selling them.
If you don't mind keeping me in mind. I would love to be able to get one. It looks like it works great on that table
SO..... Cloudray told me the stepper driver inside my machine wouldn't properly run my rotary table. My machine came with a driver, because I had a rotary already setup. Do you know the proper way to install the recommended DM860S?
Hi there I am also trying to get my DM860 setup. Did you ever figure out how to setup yours?
What kind of laser cutter are you using?
Can you help me to setup my fiber laser?
Now what happens if you put two wires together by mistake and plug that into your machine the street lights in your neighborhood would be out
hi friend.
The one thing that he should be guaranteeing after seeing him put those wires together and hearing him talk about opening your machine to do all this excess work he's reassuring that you void your warranty possibly short out your machine yeah I don't think so
If you are not comfortable doing basic electrical work then I would not recommend wiring the rotary table yourself. That being said, there is a very low risk of causing any damage to the laser due to miswiring.