DIY Hitch Tire Carrier
Vložit
- čas přidán 11. 09. 2023
- Links:
Donor Hitch
amzn.to/3LmWEop
Hitch Tube:
amzn.to/3EVtnh3
Latch:
amzn.to/3LiaEzC
License Plate Holder with LED:
amzn.to/48oEMU2
Gas Strut:
amzn.to/3ZiJlv2
7/8" Drill Bit:
amzn.to/3PCOk6z
7/8"-14 x 5 1/2" Bolt:
www.mcmaster.com/91257A943/
7/8"-14 Nut:
www.mcmaster.com/97135A295/
Steel Washers:
www.mcmaster.com/98025A037/
Nylon Washers:
www.mcmaster.com/92150A116/
Camera Used:
amzn.to/3P8aLic
Lens Used:
amzn.to/3PCUy6q
Tripod Used:
amzn.to/44ORRD8
Welder Used:
amzn.to/3ZeyHVS
📲 SOCIAL MEDIA LINKS 📲
CZcams Channel - / @dillansgarage
Instagram - / dillansgarage
Welcome to Dillans Garage! In this exciting video, we're taking you through the step-by-step process of creating a custom hitch-mounted swing-out tire carrier for your vehicle. Whether you're an off-road enthusiast, overlanding enthusiast, or just looking to add functionality to your rig, this project is for you.
In this video, you'll learn:
🔧 The materials and tools you'll need for this DIY project.
📐 The design and planning phase for a secure and efficient tire carrier.
🛠️ Fabrication techniques, including cutting, welding, and assembly.
🧰 Tips and tricks to make the build process smoother.
🚘 How to properly mount and secure your spare tire to the carrier.
Join me on this journey as we transform raw materials into a functional and rugged tire carrier that will not only enhance your vehicle's capabilities but also add a unique custom touch to your setup.
If you enjoy DIY projects, automotive customization, or simply appreciate craftsmanship, this video is sure to inspire you.
Don't forget to hit that "Like" button if you find this video helpful, and subscribe to Dillans Garage for more exciting DIY projects and automotive adventures. We love hearing from our viewers, so please leave your questions, comments, and suggestions below.
Thanks for watching, and let's get started on this awesome tire carrier build! - Auta a dopravní prostředky
Excellent job on this! There's so much satisfaction when you look at your rig and think "I built that".
You’re absolutely right. I love using it and knowing I did that. It works great still too
I have a 4th gen 4runner and was talking to my co worker of fabricating a tire mount and you just gave me some better ideas of what i want to build thank you great looking 4runner
Awesome! Stoked to help with any ideas at all! Let me know if you have any questions at all
i really liked this idea of DIY Hitch Tier Carrier. I own a Nissan Frontier and like camping. I wanted this not for the tire but to build a table for camping etc. Everything I did on my truck is reversible. I never cut any factory wiring or cutting body. This one is simply excellent. Subscribed for reviewing your other ideas.
I’m stoked do you like it! Thank you for the sub! This tire carrier worked great until I ended up putting a rear bumper on. I honestly think my tire carrier is stronger than my new bumper.
I personally would never put this on mine because of how heavy it loads the rear of the vehicle (differeny lifestyle and utility) but your build was VERY technical (especially all the engineering/mechanical terminology i.e. internal shear, double shear, dampening, deflection, etc.) creative and obviously fit your family lifestyle with just basic tools and honed skills. Double thumbs up for a great and budget DIY!
Thank you!! You picked up on all the important parts. I thought through the weight on the rear a lot, but it’s just the only way to keep a full size spare. No roof on the roof and that would be top heavy. I also figured the spare is in the rear anyway, this definitely gets it further out though. It’s all about what compromises are worth it and that’s different for everyone. Thanks again for the comment and compliment! It’s always awesome getting good feedback from people who know what they’re looking at.
Spectacularly well done. I may never make this but you did make an old guy want to learn to weld today. Thank you for sharing your passion.
Never too late to start! Depending on the projects you want to do, welders can be very affordable. If you have Instagram I look forward to seeing your first welding project in my DM. Life is too short to not just do it!
Great job and even better narration and videography, after watching I think I can do it (not nearly as well). Thanks for explaining everything, nothing glossed over like other videos.
Thank you! A few epic compliments in there. I’m stoked you like the video and can appreciate my effort to keep things on topic and detailed enough.
Nice job on the DIY Kenda Carrier and great choice of tires! 😎🤟💯
Thank you! 😊 Excited to make my new tire announcement video! Love them so far!
Beautiful build!
Thank you!
Super badass! Thank ya!
Glad you liked it!
Nice work 👍 inspiring me to build one for my suburban.
Our ‘88 burb will be next to get one of these!
Soooo crispy! 😲
Thank you good sir
👏👏👏👏👏
Well done
Thanks you! It still works great!
Very nice man!
Thank you! Glad you like it!
wow nice one...perfect....
Thank you! It’s still super solid.
Fire 🔥!
Thank you! Open and close it everyday. Still working great!
Very cool
Thank you!
Just upgraded to bigger tyres on my 2014 Jeep Grand Cherokee so this looks fantastic. Will let you know how I go( bet my welding is worse than yours lol).
Hope it goes well! When in doubt, weld slower and turn up the heat. I’d rather burn through than not penetrate enough.
What welder are you using?
I love that you drew it up in blender. I’m actually trying to learn that for my jeep tire carrier build!!! Did blender help or could you just wing it?
Depending on your skill level, you could totally wing it. I appreciate blender for projects that benefit from mocking up variations so I can see what issues I might run into ahead of time. But you have a design in your head that you know will work then you might not need it. I also really like mocking up in blender to help in knowing how much material I need. When you do make yours shoot me a DM on IG! Would love to see it.
👍🏻
Thanks!
Gonna need you to make more of these and sell me one!
I just might!
💸💸💸
I need one too
@@Jp-3237 someday I might have time to build more. Just spending all my spare time on making content and new installs! But if you buy the materials and find a local fab shop, show them the video and anyone should be able to copy what did.
What would you guys be willing to pay? It would have to be around $500 to make it worth the time. I’ll talk to a local shop and get a quote too.
Wow! Great job and excellent skill! I'm curious how much does the whole thing weight without the tire? Approximately?
Thank you! Good question. It’s not much cause I can pretty easily handle it all myself. Maybe 60LBS? Can’t say I’m the best judge of weight though.
dude I looooove this video!! One thing I'm wondering that I don't think you mention in the video. What's the wall thickness of the rectangular tube you ended up using? By looking at the video it looks like 4x2 or 3x2 rectangle, but I can't tell what the thickness of the steel is. Any chance you can tell me? I'm seriously considering making one of these for my runner :)
Stoked you like it! And thank you. 🙏 I didn’t mention the thickness mostly cause it was just a scrap steel project. I just went out and measured. It’s 1/8” (or 0.125”) wall. If I were starting from scratch and buying new steel for this I would go with 3/16” wall. That said this thing has held up really well.
And the dimensions are 1.5x3” tube. I would probably go with 2x4” 3/16”wall if I started fresh. It would definitely be heavier. But I wouldn’t think twice about it when offroad.
Great!! Thanks for the advice and being willing to share info dude. Really appreciate it!
@@miguelagdf anytime dude!
Amazing job!! How ia it holding after some off-roading?
It’s holding up great still. Swing out still feels tight and swings smooth. No extra wiggle at all! I’m stoked.
I'm going to do something like this when i move into my house. I have an Xterra and every option for a rear tire holder is too expensive.
Awesome! Always stoked to hear when someone is going to take on a DIY project. Let me know how it goes!
great job. Id like one built for an 08 Sienna van please. heres my money "$$$".
If I could convert “$$$” into $$$ then I’d start today! Haha thank you though! I really enjoyed building this one.
Базару нет четко! Сколько весит без запаски?
I’m not exactly sure how much it weight. Probably around 50-60LBS. I say that because I’m able to easily carry it alone. It’s definitely lighter than the first steel bumper I had which was 72lbs
Make me one
That’ll be one MEEllion dollars
So whats one going to cost me if you make it.. looks fire
Thank you!
I’ll sell this one for $400 if you want to come pick it up in San Diego 😅
@dillansgarage if I wasn't in fl I would 😃
How much is one for a 96 4 runner
Man I need to figure out how to make these faster. I have no time right now to make more. I’d probably charge around $500 for them not including shipping.
@@dillansgarage I could paint it my self
Lookin like your pockets are blow out there bud. Gonna have to weld them suckers on their soon lol
Haha I just bought new tires so I can’t afford new coveralls 😂
@@dillansgarage 😂
How’s the top play movement ?
It’s pretty solid. Even heavy offroad it doesn’t hardly wobble. Better than I’ve heard about some other swing outs.
@@dillansgarage we built one for our wj and we mounted the latch at the bottom but the top wobbles from front to back , no side to side play , maybe better reinforcement towards the top tied to the bottom ?
@@sarajeffries5565 how big is the contact patch when you close it? I welded an extra plate to help flush out the contact point and make it as big as possible.
Honestly might be that the latch is at the bottom. All that tire weight is trying to pull down, and the latch is pulling in the same direction instead of countering it.
Also, what kind of hinge? If it’s not a bearing maybe try making it tighter
@@dillansgarage when closed; the swing arm sits entirely flushed with the bumper and the bracket space is about 1/8-1/4 inch wide. Our arm we’re using is from a stock xj similar to a obs bronco
selling one for 3rd gen tacoma? :)
Man, I wish I had time to make more right now! To make it worth the time I'd have to charge probably $500. And shipping on top of that. If I could have a place machine cut all the pieces for me it'd be different. But dude check this out. I recently found these bumper: ebay.us/ZWfKxp
As much as I'd want to sell something, this has to be the better solution.
Meanwhile my tire carrier hitch from Wilco
Was $1,200 fml
Oof! Yeah I couldn’t stomach that. Not to say theirs isn’t worth it. It’s probably much more polished. But my scrap steel build really works nicely