I had trouble with connection. Turned out I had to select com port by selecting connected devices in control panel and, that's where I found usb/pin adapter assigned comm. Thanks for the video.
Boa noite. Com sua ajuda consegui trocar o sensor, não entendo nada de inglês, sou brasileiro, más fiz igual a você e deu tudo certo. Obrigado por compartilhar seu tempo.
My question is how did you get the program to even work on the computer, I have downloaded it and they told me from trane that i needed java version 6 update 30, so downloaded that and still nothing. any helpful comments, please help
Sir I have a RTA chiller I need replacing EXV, I unbind the Exv from binding view but my new Exv not read data it's bind going failed. this new Exv need touch the magnate trane. Please give some your important tips regarding this...
I do not work on Chillers but I am curious, did you attempt to unbind and rebind the old sensor? To see if it begin to function again, I'm sure Trane has system safegards to ensure that the EM interference doesn't cause the sensors to "drop out." Thanks for the great video!
Capitol Refrigeration,Heating,and Cooling you have to call the supply house and the counter person will call them and you will be on 3 way with the tech support person and counter person. It’s pretty dumb if you ask me.
You will have to find the proper comm port. Go under start menu search or device manager and look for ports, and it will tell you which port to select on the Tech view screen.
Hola te dio problemas el que esta disponible en la página Trane igual que a mi ? Si lograste conseguir el techview por otra vía podrías compartir esa información ?
SIR..TRAN CHILLER MODEL RTAF CHILLER HOW TO CHENGE SENSOR WITHOUT LOPTOP ..LLID BINDING USS DISPLAY SIR WHAT THIS RTAF...LLID BINDING PASWAD PLEASE SIR HELP ME
@@UlisesPalacios so just with a temp probe in the same well? Or using the software..I got the computer and correct program. Know how to bund and what not. But I've never been the tech to diagnose it....just take the temp...if it's off .it's bad.....I'm making this more complicated than it needs to be.....hahaha....thanks homie...love your channel...always great footage and knowledge! Keep it up playa! HVAC/r dude!
Tony Dibiaso for sure man. They actually tell you to take the probe out of the well and put it in an ice bath. It should read near 32 but I just put a pipe clamp near the sensor. It should read within 1-3 degrees of the sensor. I’ve. Had a few pressures transducers read about 20-30 psi off also.
They are lucky with a super tech like you, i would have quit when changing a sensor needed a confuser. Download this, upload that, update this.😠😠😠😠. Damm trane better get there shit together.
Thanks my friend!!!! This week I resolved a problem with a Trane Chiller. I replaced a pressure transmiter with Techview, I followed your video!!!!
Keep them videos coming ........Good work and explanation of your diagnosis
Many thanks, through this vídeo I can replaced the sensors by myself.
Cool video! Thanks for taking the time
Trever Kirk thanks
Excellent Vid! ~ Thanks for the inside view! ~ Like #22!!
Little Veto bag like that myself got one also! Stay safe super tech thanks for the video✌
Had similar rig for bleed off air on Geo, only difference mine had 100psi gauge. Good job, Ulises
Michael Lee thank you sir.
Good job UTG!!!
I had trouble with connection. Turned out I had to select com port by selecting connected devices in control panel and, that's where I found usb/pin adapter assigned comm. Thanks for the video.
Great Video Ulises
Ronald Niles thanks.
Boa noite. Com sua ajuda consegui trocar o sensor, não entendo nada de inglês, sou brasileiro, más fiz igual a você e deu tudo certo. Obrigado por compartilhar seu tempo.
My question is how did you get the program to even work on the computer, I have downloaded it and they told me from trane that i needed java version 6 update 30, so downloaded that and still nothing. any helpful comments, please help
Sir I have a RTA chiller I need replacing EXV, I unbind the Exv from binding view but my new Exv not read data it's bind going failed. this new Exv need touch the magnate trane. Please give some your important tips regarding this...
Good vid.
Did you get the license for tech view? When I plug in I only get data. I don’t have graphic on the unit view like yours had.
I’m trying to connect to CGAM and the tech view tells me this text: “database is too old. Get latest DB”. What does i have to do?
how did you get the leastest version? thx
When I try to connect the computer to the chiller it gives me error 43 you can help me thanks
I recommend going to RTAC training in Lacrosse, Wisconsin. It's a 3 day training course. A lot of information in those 3 days.
sir you know where can we learn that software please let me know this is my gmail :hashara.gomes@gmail.com
Cherokita consulta, cómo se llamaba ese cable q va a la lap?
thanks I need this soft wear for any or all modell thanks
How do you like those Appion PT500 gauges? I’m thinking on investing in some.
Familia Sanchez HVAC I like them. Very accurate and the clamp is nice. You can remove the sensor off the clamp and put it on any size pipes
Disculpa no podrás hacer un tutorial de como dar de alta un instrumento en un chiller trane ??
Dear sir can you explain the details of software
I do not work on Chillers but I am curious, did you attempt to unbind and rebind the old sensor? To see if it begin to function again, I'm sure Trane has system safegards to ensure that the EM interference doesn't cause the sensors to "drop out." Thanks for the great video!
Alpha Tech Refrigeration thanks. I called trane tech support to see if in could calibrate the sensor. They said no It needed to be replaced.
Thank you.
what number did u call for trane tech support? I need to have the trane supplyhouse guys call for me because they only deal with trane employees.
Capitol Refrigeration,Heating,and Cooling you have to call the supply house and the counter person will call them and you will be on 3 way with the tech support person and counter person. It’s pretty dumb if you ask me.
Capitol Refrigeration,Heating,and Cooling lol i just re read your question. It’s the same way did.
Hi where did you download the latest version for the train software main tells me the same it's out of date kind regards pierre
internal.trane.com/CQApps/DesignAnalysis/CQTechview.aspx
can you tell us how to upgrade?
What cable do you use? I am getting connection problem error on techview.
You will have to find the proper comm port. Go under start menu search or device manager and look for ports, and it will tell you which port to select on the Tech view screen.
Can you please send the link of the software, website to download the software.
Which type of magnet you are using for bind sensor please tell me?
Any magnet from a screwdriver
How can without laptop bind this sensor any solustion without program
hola necesito urgente donde bajar el software ch530 hay algun lugar que no sea desde la pagina ..????
Hola te dio problemas el que esta disponible en la página Trane igual que a mi ?
Si lograste conseguir el techview por otra vía podrías compartir esa información ?
Salut comment identifier les compresseur
when adding glycol. whats percentage? why did you use a refractomotor?
MR BILL Purcell 40 percent. 10-15 degree temps
how do you know its 40%
MR BILL Purcell because I purchase the glycol for this system but yes it should always be checked.
Hey Brother, have to replace my sensor also, where do I get the software?
Thank man for the video
Shoot me a text 817 301 9409
Show and explain how to tie and untie the control boards
SIR..TRAN CHILLER MODEL RTAF CHILLER
HOW TO CHENGE SENSOR WITHOUT LOPTOP ..LLID BINDING USS DISPLAY
SIR WHAT THIS RTAF...LLID BINDING PASWAD
PLEASE SIR HELP ME
CH530 is that a RTAC?
Familia Sanchez HVAC it’s a CGAM
yes
How to get licence please
But how did you know the sensor was failed??!?
Sincerely THE HVAC/R DUDE!
Tony Dibiaso it was reading 50 degrees too high
@@UlisesPalacios so just with a temp probe in the same well? Or using the software..I got the computer and correct program. Know how to bund and what not. But I've never been the tech to diagnose it....just take the temp...if it's off .it's bad.....I'm making this more complicated than it needs to be.....hahaha....thanks homie...love your channel...always great footage and knowledge! Keep it up playa!
HVAC/r dude!
Tony Dibiaso for sure man. They actually tell you to take the probe out of the well and put it in an ice bath. It should read near 32 but I just put a pipe clamp near the sensor. It should read within 1-3 degrees of the sensor. I’ve. Had a few pressures transducers read about 20-30 psi off also.
@@UlisesPalacios 10/4 on that...I'll be more prepared later this week. Appreciate the info!
They are lucky with a super tech like you, i would have quit when changing a sensor needed a confuser. Download this, upload that, update this.😠😠😠😠. Damm trane better get there shit together.
confuser are needed to fix nearly everything these days, even some toilets :)
throttle bottle. I completely agree! And believe me I ought to know I polish a lot of turds.
Those suction sensors fail all the time...
All the damn time lol
Just replaced 2 today
Keeps us busy at least lol. I keep a few on my truck now.
Если кому то нужен будет ремонт датчиков и ТРВ трейн обращайтесь