Just ordered these for our new Highlander and can't wait to install them! I do wish the SS3's were compatible though... Would've been awesome to have the more rugged look. 😉
Hey there! We do have an output comparison video between some Toyota Fog Lamps and our Elite Series Lamps! Check it out here: czcams.com/video/8CbhXqtzHQE/video.html
Could you also tap into the led DRLs on the non LED headlights? That way you can run the back light during daytime driving without having to turn the marker lights on.
@@ShawnFielden it was the green wire, DD confirmed. But. I avoided using the t-taps, as they have corrosion issues with time. I bought the plug and play harness for the backlight from DD's site instead 17$.
I finally installed fog lights, it's bright nice wide pattern.. I have a 2018 SR5 and I tried connecting to my side markers but does not seem to work when DRL is on ? would appreciate any suggestions.
Hey there! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to troubleshoot and help you further!
Just finished installing mines and driver side was yellow and the passenger side was the cool white I ordered. But the yellow fog wasn’t tinted as it said on the description so it could be mistakenly packaged from you guys?
Hmm, interesting! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Love the lights. My backlight feature after working upon installation hasn't worked since. All wiring is good & connected but. the backlight won't turn on. Does anyone have any advice on what could work or any other wire/area to connect to that is a 12V source?
Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that!
Hi. I ordered SS3 and SS5 with backlights but I have not ordered optional wiring/harness/toggle. Can you advice on steps for using non DD wires to set up backlights? And material I need?
No extra material needed, just ensure you get a 4-pin DT-Style connector, and a 3-way switch! Just toggle the backlight switch on and off 3 times to change the colors to your desired color!
Is there instructions for Subaru Ascent Limited model? I bought the Elite Series Fog from you guy but I didn't install the DLR wiring because I'm unsure. My Subaru Ascent Limited came with LED headlight, would that be the same number 4 wire to tap into?
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Most customers wire the backlight into their DRL wire for the backlight feature, however, if you don't have a DRL in your headlights, you could have them wired to an auxiliary switch, or another power wire, however you see fit!
Hmm, that's a good question! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
I have an issue installed eveything correctly on my 23 tacoma with led headlights. T tapped the pinkish wire. It did not work thinking i didnt pinch it hard enough. I went to use pliers to pinch it the wire got cut clean. I soldered it backtogether and thinking of a different way. Is there anyway to do it? Such as using a add a fuse even thought wire isnt long enough. In willing to add more wire. I know the backlights work cause i tested it by touching the ends to my battery
Sorry to hear about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
In the middle of my install…I have a 2014 Tacoma with factory TRD Pro headlights (not LED). I’m trying to tie into the side marker 12v wiring for the backlight feature; however, there is no purple wire, only a green and white. I don’t want to assume, is the green the equivalent of the purple wire?
Hey there! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@@diodedynamics thank you! I figured it out with some additional research online. It was the green wire, and everything works great. Just need to do some alignment.
The lenses are automotive grade polycarbonate, and the fog light kit includes everything you need to install! In order to get the backlight option to function without tapping any wires, we do offer a 3rd gen plug-and-play harness that plug into your factory headlight harness and allows for a full install without tapping any wires! Here is the link for you! www.diodedynamics.com/plug-and-play-backlight-harness-for-2016-2023-toyota-tacoma-pair.html
Thank you! But after looking at your website link, the harness is not compatible with OEM LED Headlights? And that is what the truck has. So no plug and play harness then for trucks that have OEM LEDS?
@@okkin981 Unfortunately, we do not have a compatible harness for OEM LED Headlights. You will have to use a tap, or custom splice into the power wire in order to gain function of the backlight. The main beam does not require a tap in order to use, so they can be installed without taping anything!
@@okkin981 We would recommend making final aiming adjustments once they're installed, as things like ride height can effect the output. Here's the link to our video on how to do so properly! czcams.com/video/p5RXq28ZOYo/video.html&t
@@diodedynamics hey, was just wondering. I'm running diode ssc2 ditch lights on my tacoma and I wanna move up to the ss3. Do they share the same connectors? Or?
@@GhettoFabulous670 Yes! You can absolutely make the change, just be sure to purchase the backlit model of the SS3s, as those use the same connectors as the SSC2s!
i got this pair yesterday i install today they are awesome but on sr5 model for the amber back light marker can't be connected to side marker like the video shows me i connected to the 12v drl front yellow light of headlight the video should be update connecting to the side marker for the amber color will not work 2018 toyota tacoma sr5
Sorry to hear that, feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
I have a 2021 subaru ascent and I recently bought this foglights. My only question is to where to tap the backlight wiring. I tried going through the side marker or drl but not sure which one is it? Can somebody point me into the right direction with pictures please. Thanks.
Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Hey there! Go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Ok DD I've looked everywhere on the internet. I want to run a 2nd set of SS3 on my Tacoma. Do you guys offer a deutsch connector splitter or the output of 2 lights would be too much of a load?
Hey there! It all depends on what harness you are using and what lights you plan on running! You will have no problems running two pairs of Pro SS3s with our Heavy duty harness! All of the information is on our website, or you can contact our team for more assistance at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
We use them on our personal vehicles with no issues. You can always solder the connection or wrap the t-tap in electrical tape if you would like more protection!
Type-A and Type-B refer to the mounting bracket included with the fog lamp. Type-A: Acura ILX 2013-2018 Acura RDX 2010-2018 Acura TL 2012-2014 Acura TSX 2011-2013 Ford Bronco (w/ Standard Bumper) 2021 Ford C-Max 2013-2016 Ford Explorer 2012-2015 Ford Fiesta ST 2014-2019 Ford Focus 2009-2014 Ford Focus ST 2013-2014 Ford Freestyle 2005-2007 Ford Fusion 2013-2016 Ford Mustang 2006-2009 Ford Mustang 2015-2017 Ford Ranger 2019-2022 Ford Ranger STX 2004-2007 Ford Taurus X 2008-2009 Ford Transit 2010-2018 Fiat 500 2012-2016 Honda Accord 2013-2015 Honda Civic 2016-2021 Honda Civic Si Sedan 2013-2015 Honda Crosstour 2013-2015 Honda CR-V 2012-2014 Honda CR-Z 2013-2016 Honda Insight 2010-2014 Honda Odyssey 2019-2020 Honda Pilot 2012-2019 Nissan Frontier 2009-2021 Nissan Sentra 2007-2012 Nissan Titan 2017-2019 Nissan Xterra 2005-2015 Ram 1500 (non- LED) 2019-2022 Scion FR-S 2013-2016 Subaru Ascent 2019-2022 Subaru BRZ 2013-2017 Subaru Crosstrek 2013-2022 Subaru Forester 2014-2022 Subaru Impreza 2012-2014 Subaru Impreza (w/ Eyesight Package) 2015-2022 Subaru Legacy 2010-2014 Subaru Legacy 2018-2021 Subaru Outback Wilderness 2022 Subaru WRX 2015-2021 Subaru WRX STi 2015-2017 Type-B: Lexus CT200h 2014-2017 Lexus ES350 2013-2018 Lexus ES300h 2013-2018 Lexus GS200t 2016-2019 Lexus GS350 2013-2020 Lexus GS450h 2014-2018 Lexus HS250h Base 2010-2012 Lexus HS250h Premium 2010-2012 Lexus HS250h Ultra Premium 2010-2011 Lexus IS200t 2016 Lexus IS250 2014-2015 Lexus IS350 2014-2016 Lexus IS F 2008-2014 Lexus LX570 2008-2011 Lexus LX570 2013-2015 Lexus NX200t Base 2015-2018 Lexus NX200t Premium 2015-2018 Lexus NX200t F Sport 2018 Lexus NX300h 2018-2020 Lexus NX300h Base 2015-2020 Lexus NX300h F Sport 2018-2020 Lexus NX300h Premium 2015-2020 Lexus RX350 2010-2013 Lexus RX350 Base 2014-2020 Lexus RX350 F Sport 2013 Lexus RX350 F Sport 2016-2021 Lexus RX350 Premium 2014-2015 Lexus RX450h 2010-2013 Lexus RX450 Base 2015-2020 Lexus RX450 F Sport 2016-2020 Lexus RX450 Premium 2014-2015 Lexus RX450L 2020 Subaru Legacy 2015-2017 Toyota 4Runner 2014-2022 Toyota Avalon 2007-2011 Toyota Camry 2007-2015 Toyota Corolla 2009-2016 Toyota Highlander 2008-2010 Toyota Highlander 2014-2022 Toyota Matrix 2009-2013 Toyota Prius 2010-2011 Toyota Prius 2015-2016 Toyota Prius C 2012-2016 Toyota Prius V 2012-2016 Toyota RAV4 2006-2012 Toyota RAV4 2016-2021 Toyota Solara 2007-2008 Toyota Tacoma 2012-2021 Toyota Tundra 2014-2021 Toyota Venza 2009-2014 Toyota Yaris 2006-2014
Hey there! Many of us here at Diode use T-Taps on our vehicles with no issues. However, this connection can always be soldered if you have the means to do so!
I really want to know the specs of those wheels and tires.
Just ordered these for our new Highlander and can't wait to install them! I do wish the SS3's were compatible though... Would've been awesome to have the more rugged look. 😉
I installed mine last weekend and I love these fog lights! I went for the white LED and they sure are bright. Love the amber backlight as well!
Glad you like them!
Great lights, great truck, great video
Thank you!
Would have been nice to see a before and after with the lamps…
Hey there! We do have an output comparison video between some Toyota Fog Lamps and our Elite Series Lamps! Check it out here:
czcams.com/video/8CbhXqtzHQE/video.html
Could you also tap into the led DRLs on the non LED headlights? That way you can run the back light during daytime driving without having to turn the marker lights on.
Hey Kody! You can tap them into any 12v switch power source.
3:54 If we do tap into the LED DRL, do we T-Tap the green wire? The are only 3, black/white (ground?) Pink and Green.
@@davemann8195 I’m guessing red orange wire that’s the hot wire I’m guessing ? Did that work ? I’m doing mine today.
@@ShawnFielden it was the green wire, DD confirmed. But. I avoided using the t-taps, as they have corrosion issues with time. I bought the plug and play harness for the backlight from DD's site instead 17$.
also the amber light marker i would like to be a little more brighter "back light"
These are simply an accent light. They tend to be "brighter" or more amber through a yellow optic as well!
@@diodedynamics ill see when it gets darker
Ordered mine for my 2017 👍
Thank you for your support!
I finally installed fog lights, it's bright nice wide pattern.. I have a 2018 SR5 and I tried connecting to my side markers but does not seem to work when DRL is on ? would appreciate any suggestions.
Hey there! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to troubleshoot and help you further!
Just finished installing mines and driver side was yellow and the passenger side was the cool white I ordered. But the yellow fog wasn’t tinted as it said on the description so it could be mistakenly packaged from you guys?
Hmm, interesting! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Love the lights. My backlight feature after working upon installation hasn't worked since. All wiring is good & connected but. the backlight won't turn on. Does anyone have any advice on what could work or any other wire/area to connect to that is a 12V source?
Hey there!
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that!
Hi. I ordered SS3 and SS5 with backlights but I have not ordered optional wiring/harness/toggle. Can you advice on steps for using non DD wires to set up backlights? And material I need?
No extra material needed, just ensure you get a 4-pin DT-Style connector, and a 3-way switch! Just toggle the backlight switch on and off 3 times to change the colors to your desired color!
Is there instructions for Subaru Ascent Limited model? I bought the Elite Series Fog from you guy but I didn't install the DLR wiring because I'm unsure. My Subaru Ascent Limited came with LED headlight, would that be the same number 4 wire to tap into?
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
I have 2022 4runner orp. Where should I put the wiring for backlight?
Most customers wire the backlight into their DRL wire for the backlight feature, however, if you don't have a DRL in your headlights, you could have them wired to an auxiliary switch, or another power wire, however you see fit!
Size of the lift? Build of that tacoma? Love that wheel setup!
Hey there! We are not sure of the build specifics of this Tacoma, as we used it simply for our lighting video. Sorry about that!
Can the t-tap be on the ambers from the grill?
Hmm, that's a good question! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
I have an issue installed eveything correctly on my 23 tacoma with led headlights. T tapped the pinkish wire. It did not work thinking i didnt pinch it hard enough. I went to use pliers to pinch it the wire got cut clean. I soldered it backtogether and thinking of a different way. Is there anyway to do it? Such as using a add a fuse even thought wire isnt long enough. In willing to add more wire. I know the backlights work cause i tested it by touching the ends to my battery
Sorry to hear about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
In the middle of my install…I have a 2014 Tacoma with factory TRD Pro headlights (not LED). I’m trying to tie into the side marker 12v wiring for the backlight feature; however, there is no purple wire, only a green and white. I don’t want to assume, is the green the equivalent of the purple wire?
Hey there! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@@diodedynamics thank you! I figured it out with some additional research online. It was the green wire, and everything works great. Just need to do some alignment.
@@Dawginbama17 Perfect! Glad you got them installed!
Yo, your comment helped me out. I can confirm green side marker wire on 2015 PreRunner works. Thanks bud Go DAWGS!
@@keatonmonroe530 glad my comment came in handy. GATA!
Just put mine in, I was able to do it with minimal effort without out taking my wheel liners out.
Right on! That's great to hear!
Where did you store the excess wiring ?
Are these Glass Lenses? Have the LED factory headlights and don' t want to tap into any wiring. Any Plug and Play Connectors you offer? Thank you
The lenses are automotive grade polycarbonate, and the fog light kit includes everything you need to install! In order to get the backlight option to function without tapping any wires, we do offer a 3rd gen plug-and-play harness that plug into your factory headlight harness and allows for a full install without tapping any wires!
Here is the link for you!
www.diodedynamics.com/plug-and-play-backlight-harness-for-2016-2023-toyota-tacoma-pair.html
Thank you! But after looking at your website link, the harness is not compatible with OEM LED Headlights? And that is what the truck has. So no plug and play harness then for trucks that have OEM LEDS?
@@okkin981 Unfortunately, we do not have a compatible harness for OEM LED Headlights. You will have to use a tap, or custom splice into the power wire in order to gain function of the backlight. The main beam does not require a tap in order to use, so they can be installed without taping anything!
Just bohght this set, super excited to install now. But let me ask are they drop in or do I need to align them after install?
@@okkin981 We would recommend making final aiming adjustments once they're installed, as things like ride height can effect the output. Here's the link to our video on how to do so properly!
czcams.com/video/p5RXq28ZOYo/video.html&t
Will the white color match the factory LED headlight color on my ‘23 TRD Sport or will the white be slightly different?
All of our lights are measured and tested to be exactly 6000k!
@@diodedynamics is that what the factory LED headlights are? 6,000k?
What are the suspension and tire/wheels specs on that tacoma? It sits lovely
We're not sure unfortunately, sorry about that! We know what lights are on it though! 😎
@@diodedynamics hey, was just wondering. I'm running diode ssc2 ditch lights on my tacoma and I wanna move up to the ss3. Do they share the same connectors? Or?
@@GhettoFabulous670 You absolutely can! Just be sure to get the backlit model, as they use the same connectors as the SSC2!
@@GhettoFabulous670 Yes! You can absolutely make the change, just be sure to purchase the backlit model of the SS3s, as those use the same connectors as the SSC2s!
@@diodedynamics I believe the back light models only come with the Pros and Max's, yeah?
i got this pair yesterday i install today they are awesome but on sr5 model for the amber back light marker can't be connected to side marker like the video shows me i connected to the 12v drl front yellow light of headlight the video should be update connecting to the side marker for the amber color will not work 2018 toyota tacoma sr5
Sorry to hear that, feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@Diode Dynamics i got working. just the side marks the back light wont work like the video says so i connect on the drl lights
I have a 2021 subaru ascent and I recently bought this foglights. My only question is to where to tap the backlight wiring. I tried going through the side marker or drl but not sure which one is it? Can somebody point me into the right direction with pictures please. Thanks.
Hey there!
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
which color is for the DRLS ? planning to tap into DRLS
Hey there! Go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Do you have a video for a 2018 Toyota Highlander install ?
Unfortunately, we do not have an install video for the Highlander. However, it uses the same kit, so the install will be very similar to this Tacoma!
Ok DD I've looked everywhere on the internet. I want to run a 2nd set of SS3 on my Tacoma. Do you guys offer a deutsch connector splitter or the output of 2 lights would be too much of a load?
Hey there! It all depends on what harness you are using and what lights you plan on running! You will have no problems running two pairs of Pro SS3s with our Heavy duty harness! All of the information is on our website, or you can contact our team for more assistance at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Off topic, which SCS wheels are those? Size,specs,etc also what tire and tire size? Thanks 🙏🏻
Hey Kyle ! Unfortunately, we are not sure. This was a customer's vehicle. Sorry!
Can you find out what the set up was? We would all really appreciate it!
Thanks man
Which fog light is brighter, the elite or ss3 max?
Hey there! Our SS3 Max fog light is the brightest fog light we offer at this time. The Elite Series fog lamps are comparable to our SS3 sport pods!
Are the t tap’s reliable? Like what if water gets to them?
We use them on our personal vehicles with no issues. You can always solder the connection or wrap the t-tap in electrical tape if you would like more protection!
I have 2021 Honda Ridgeline here, I want to buy a pair but look like it is not available for my vehicle.
Brother I have no options from anybody for my car, 2nd gen IS250. PAIN
Sorry about that! We'll definitely pass the suggestion on to our engineering team.
Solution: get rid of your crappy Ridgeline and get a real truck instead.
What does type A and B mean on these new fog lights?
Type-A and Type-B refer to the mounting bracket included with the fog lamp.
Type-A:
Acura ILX 2013-2018
Acura RDX 2010-2018
Acura TL 2012-2014
Acura TSX 2011-2013
Ford Bronco (w/ Standard Bumper) 2021
Ford C-Max 2013-2016
Ford Explorer 2012-2015
Ford Fiesta ST 2014-2019
Ford Focus 2009-2014
Ford Focus ST 2013-2014
Ford Freestyle 2005-2007
Ford Fusion 2013-2016
Ford Mustang 2006-2009
Ford Mustang 2015-2017
Ford Ranger 2019-2022
Ford Ranger STX 2004-2007
Ford Taurus X 2008-2009
Ford Transit 2010-2018
Fiat 500 2012-2016
Honda Accord 2013-2015
Honda Civic 2016-2021
Honda Civic Si Sedan 2013-2015
Honda Crosstour 2013-2015
Honda CR-V 2012-2014
Honda CR-Z 2013-2016
Honda Insight 2010-2014
Honda Odyssey 2019-2020
Honda Pilot 2012-2019
Nissan Frontier 2009-2021
Nissan Sentra 2007-2012
Nissan Titan 2017-2019
Nissan Xterra 2005-2015
Ram 1500 (non- LED) 2019-2022
Scion FR-S 2013-2016
Subaru Ascent 2019-2022
Subaru BRZ 2013-2017
Subaru Crosstrek 2013-2022
Subaru Forester 2014-2022
Subaru Impreza 2012-2014
Subaru Impreza (w/ Eyesight Package) 2015-2022
Subaru Legacy 2010-2014
Subaru Legacy 2018-2021
Subaru Outback Wilderness 2022
Subaru WRX 2015-2021
Subaru WRX STi 2015-2017
Type-B:
Lexus CT200h 2014-2017
Lexus ES350 2013-2018
Lexus ES300h 2013-2018
Lexus GS200t 2016-2019
Lexus GS350 2013-2020
Lexus GS450h 2014-2018
Lexus HS250h Base 2010-2012
Lexus HS250h Premium 2010-2012
Lexus HS250h Ultra Premium 2010-2011
Lexus IS200t 2016
Lexus IS250 2014-2015
Lexus IS350 2014-2016
Lexus IS F 2008-2014
Lexus LX570 2008-2011
Lexus LX570 2013-2015
Lexus NX200t Base 2015-2018
Lexus NX200t Premium 2015-2018
Lexus NX200t F Sport 2018
Lexus NX300h 2018-2020
Lexus NX300h Base 2015-2020
Lexus NX300h F Sport 2018-2020
Lexus NX300h Premium 2015-2020
Lexus RX350 2010-2013
Lexus RX350 Base 2014-2020
Lexus RX350 F Sport 2013
Lexus RX350 F Sport 2016-2021
Lexus RX350 Premium 2014-2015
Lexus RX450h 2010-2013
Lexus RX450 Base 2015-2020
Lexus RX450 F Sport 2016-2020
Lexus RX450 Premium 2014-2015
Lexus RX450L 2020
Subaru Legacy 2015-2017
Toyota 4Runner 2014-2022
Toyota Avalon 2007-2011
Toyota Camry 2007-2015
Toyota Corolla 2009-2016
Toyota Highlander 2008-2010
Toyota Highlander 2014-2022
Toyota Matrix 2009-2013
Toyota Prius 2010-2011
Toyota Prius 2015-2016
Toyota Prius C 2012-2016
Toyota Prius V 2012-2016
Toyota RAV4 2006-2012
Toyota RAV4 2016-2021
Toyota Solara 2007-2008
Toyota Tacoma 2012-2021
Toyota Tundra 2014-2021
Toyota Venza 2009-2014
Toyota Yaris 2006-2014
@@diodedynamics
I see
Thank you
is the back light step optional or mandatory?
It is optional! You do not have to run the backlight if you do not wish to.
@@diodedynamics what does one do with the extra “back light” wiring then??
@@henryscreations It will unplug from the harness!
Wtf you guys are using ttaps. Especially in area that is prone to moisture. I have lost respect for you as a company. Best buy wiring quality here.
Hey there! Many of us here at Diode use T-Taps on our vehicles with no issues. However, this connection can always be soldered if you have the means to do so!
do u know his/her IG @?
We do not, sorry about that!