'Budget' Sim Handbrake '16-Bit Hall Sensor' Review [Banggood]
Vložit
- čas přidán 9. 06. 2024
- ▶▶ Product link (best price): s.click.aliexpress.com/e/_9gLJXj
Hi, this is my review for this budget Sim Racing Handbrake (PC ONLY, NOT CONSOLE COMPATIBLE). This is an analog handbrake that enables you to adjust the braking force application. In the video, it was tested in Dirt Rally 2.0 which doesn't have the best analog braking progression, but there is some before locking up. Off-camera I also tested with Dirt Rally (1.0) and Automobilista, and it also worked great in those games too! ✅Subscribe: tinyurl.com/yyhjua7h
(Mounting hole spacing without the clamp is as follows: 35mm width, 85mm length. M6 bolts)
▶ Download DIView: www.leobodnar.com/files/DIView...
Save $$$'s on the product in the video using this coupon: BG9483b1
▶ Sim Handbrake (with clamp): www.banggood.com/custlink/K3K...
RELATED CONTENT:
▶ 'Budget' USB Analog Sim Racing Handbrake REVIEW! • 'Budget' USB Analog Si...
▶ Heusinkveld 'Load Cell' Sim Handbrake [REVIEW] • Heusinkveld 'Load Cell...
▶ Thrustmaster TSS Handbrake Sparco Mod [REVIEW] • TSS Handbrake Sparco M...
▶ The Budget AliExpress Handbrake I would 'NOT' recommend! • The Budget Analog Hand...
#Simracing #SimRacingReviews #Banggood - Hry
▶▶ Product link (best price): bit.ly/3jMXkpH
YOU CAN HELP SUPPORT MY WORK WITH A SMALL DONATION (THANKS):
▶ You can support me on Patreon: www.patreon.com/simracingcorner
▶ Buy a Coffee for Sim Racing Corner: ko-fi.com/simracingcorner
You should get another handbrake and test it bro
@@mobostock3886 I have already reviewed other handbrakes.... czcams.com/video/sFlvwY9NjkA/video.html czcams.com/video/fDRnsGrQMK4/video.html
The link you have in the description is not from banggood is it the same handbrake?
If you want to convert the brake into conventional, horizontal position (as shown at 3:48), you can do more than just move the handle. The whole moving structure can be inverted if you take it apart. The result is a very nice brake with no piece sticking upwards. I just did that to mine.
ZAMN
nice.. i was researching to see if that was even possible.. youre the man!
Has anyone got any instructions on how to do this mod? Which bits need adjusting?
Bought this 5 minutes ago and the discount code still works, 26 euros saved thx !
How is the handbrake? Thinking about getting it, do you recommend?
@@austere_clicky6131 yes I would recommend this handbrake. Only issue I had was that one of the holes didn't line up, so now my handbrake is secured with 3 instead of 4 bolts. Anyway rock solid mounted so no problem for me
@@bertthys9714 does it work with a thrust master tmx pro wheel? And does it connect right to the console
@@croppingchimp1521 Not sure if this works on consoles, you have to check this with the seller. I'm using this handbrake on PC via USB
@@bertthys9714 alright thanks I found one that works on console
Bro shoutout to you man still replying to all the comments nearly 2 years later! Eventhough a lot of the people ask the same questions.
Yeah, I do what I can to help out.
I just ordered the 16bit handbrake and this is very rare and be use on a sim rig just waiting to get delivered and run it on my PC and rig thank you ☺️👍
Hey has it arrived yet? and was it as described?
Marshy yes it is i have received it and in perfect conditon and fully functional they taken good care the way it was been shipped to it’s destination. The item is the same item it was been described on the channel and it’s worth the price for it ☺️👍
@@gerrysettler8624 yea mine came literally today and i couldnt be happier with it,, well worth it
Marshy so cool! Am so happy for you having a USB Handbrake gain us more advantage playing racing sim games cheers! ❤️👌☺️
How is the handbrake? Thinking about getting it, do you recommend?
The most interesting Sim gear channel on CZcams if you ask me. Nice length and covering everything!
Thanks Sam, appreciate it.👍
Perfect video. Very informative and I am looking forward to buy this.
How is the handbrake? Thinking about getting it, do you recommend?
Nice review i was looking into this handbrake,definitely going to get it now 👍
How is the handbrake? Thinking about getting it, do you recommend?
@@austere_clicky6131 yes i can recommend it, i got one like this on amazon, works perfect, it got a bit of sideways play but nothing that hinders the experience.For the price it's a no brainer.👍
Nice review again mate!👍
A bit weak in resistance, but hey, for that price! 💪
I went with the other one as an extra hand brake do to mounting, and guessing the resistance will be pretty weak on that too. But thinking about how little I use the hand brake even though I rally quite a bit, it's hard to justify a more expensive one.
You are dead right, a handbrake doesn't normally get used a whole lot. For the video, I pre-selected a track with as many sharp bends as I could find and overused it for demonstration purposes.
Nice review not long now it's in London passed customs at LHR :) just waiting now and the CSL arrived too just waiting for the SHH gear stick.
Very exciting. Looking forward to finding out what you think of the SHH. I'll likely pull the trigger sometime in the new year.
Used the coupon code on 2nd Jan 2020, still worked, cheers!
You mean 2021 idiot
You can also adjust the spring with a spanner
I have one, I have had it for about a year however when I first got it the magnet came off and it came with no clamp. I had to super glue the magnet back on and find a clamp i already had. Apart from that it does its job and there is an allen screw at the back you can tighten up to reduce the deadzone.
Just bought it and your code still works, saved $44CAD. Thanks!
How is the handbrake? Thinking about getting it, do you recommend?
@@austere_clicky6131 works great, doesn’t come with any grease on the pivot point or slides so it develops a little squeak after a while. But that’s not hard to fix.
Been looking on that one but never clicked the "BUY" button. But I think it's time that I do that. Good Video!
How is the handbrake? Thinking about getting it, do you recommend?
@@austere_clicky6131 I bought a similar one. For about the same price. Happy with it so far. Does the job more than enough for that price 👍
I bought the handbrake and used your coupon, great video
Awesome! Thank you!
Is it still good?
how is it
@@dh6865 its still working
@@dh6865 yes its still working
Thanks for this. I've looked at hundreds of these things and they either don't come with a table clamp or the seller doesn't bother to mention if it has a table clamp or take a photo of one and they always cost far too much for me to buy one without knowing for sure if it comes with a table clamp. But this one is $35 with a table clamp! Instant Buy. TABLE CLAMP! (edit) actually there's another one on that site that appears to be exactly the same thing but for only $13! I can't tell why one is cheaper than the other. (edit 2) I see now. Variations of the product are handled by changing the "color' option. One "color" is just the table clamp, another "color" is just the mounting plate, another "color" is the handbrake with the table clamp and without the mounting plate, etc.
the one with clamp is so good!!!!
Definitely!
I did not buy the one from Bangood, but one using the same set up and I would just suggest being careful with the cable where it connects to the handbrake. I had the connector break off the board. I love the handbrake, it is a great value.
I’m very late but ived been looking for a hand brake and this looks very realistic, but how big and long is the hook?
Iracing recognized mine right away
Great handbrake
Great video. Do you think it could be fitted pretty easy to the side bar on a Playseat Challenge?
Maybe with a basic DIY mount. Saddle brackets and piece of wood to make a small platform.
just paid for it and holy shit i got 31 dollars off from your code!! thats amazing bro!
How is the handbrake? Thinking about getting it, do you recommend?
Can you provide the layout of the mouting holes and dimentions?
Hey, do you know the distance between mounting holes and/or the mounting hole diameter? I want to buy one of these handbrakes but want to know if i cant mount them first, as I do not want to use the clamps. Thanks, great review!
Hole spaces are as follows: 35mm width, 85mm length. M6 bolts.
Yeah I hooked this up to my manual truck, got it all set up, and when I pulled it, even though I hooked up my e brake cable to it, I heard a loud bang under my feet and now my e brake doesn't work, is this product fake and how do I get my money back
great review thank you for the info.
Nice review and amazing promo code. but short question: How did you exactly mount it onto your rig? i have this type of rig aswell but i have no clue how to mount it😅
Mounted to 2 pieces of profile through the bolt holes in the handbrake base, which are connected to main arm. Watch it closely, it's simple enough. czcams.com/video/dyxRyXr8QnI/video.html
5:40 i assume its just because its setup for drifting, in the majority of cars setup for drifting (in my experience) you will find the handbrake will be setup pretty loose. i personally like it that way myself also
Didn't see anyone ask this but what is the rotating metal hook for? Is that to hold the break back at the start of the race so you don't have to do it manually? If so, the default position out of the box doesn't extend forward enough to hold the bolt but I saw the is a hole to adjust the hook and move it forward a bit. Any help is appreciated. Thank you. Well done video, very informative.
Yes, the hook is for holding full lock on the handbrake. It's a redundant feature as the lever doesn't come back far enough to hook it around the bolt. Of course it's a modded version of the handbrake, so I guess it would have worked before. I ended up removing the hook as it rattled around a bit.
I assume for use as a parking brake, in its IRL applications.
The metal hook in the real world application of that handbrake is used to create a temporary parking brake in queuing lines during drifting events.
Hi, would this work on ps4 either plugged in directly or via the drive hub? I'm running the tm tx via drive hub if that helps.. Cheers
It's not console compatible. I don't know about using drive hub, I don't know much about that hardware. Most likely not.
Shoot I got the handbrake with no clamp can you help me find a solution that would REALLY HELP
I buyed that handbrake for forza 5, but i can`t connect it. Does somebody have the same problem and knows a solution?
Mine comes up as arduino micro and has eay more stuff on the test page of the properties menu like buttons and shit? It doesnt have the axes and slider
I have a question can some one help me? I have this same hand brake but can not get it to work with Forza Horizon 4 , but I when I test it it shows that it’s working. I give up
Wish I saw this video earlier, I got one from Amazon and it just came with the handbrake, no desk mount now I dunno what to do
Gonna buy myself one of these for dcgp asseto corsa
Hey I really liked your vid, was a good review and it was enough to make me want one haha, I ordered one and it said pre order, which I was fine with, but a few days after it sent? I’m just confused as it said pre order, has a tracking number but It isn’t trackable, not sure if that’s because it’s not in my country yet and or it’s not in the system, just confused and wondering if I should be concerned/ worried lol
You should be fine, tracking numbers don't get on the system right away. I've used Banggood quite a few times for bits and pieces and I've always found them to be reliable.
is this compatible with the logitech g29 for forza on pc?
GREAT video!!!
Thanks!!
Anybody know why the Z axis stays stuck on 50% whilst calibrating the handbrake?
When my one arrived the 4 holes in the top half of the mounting bracket did not all align with the holes in the bottom of the handbrake unit. I reported this to Banggood and have had an initial response but at the time of writing this comment the issue has not been resolved. Happy to update this comment if I get a satisfactory outcome.
I don't know why, but mine has a giant deadzone in the start and when it starts detecting the travel it reaches 100% so quick, almost before middle of the total travel. Does anyone has any tips on how to calibrate this or mod?
Can it have its spring removed? I want it to be braking while not touching
Hello, mine squeaks at the side nut, is the use of grease required?
What is the difference from 16 to 14 bit
Hi It’s me again quick question I ordered the usb hydraulic on your link cause Im so into it for my sim rig, how many days should it be delivered from your place? Im from california and I dont have any idea how long it will take before it get delivered hope you don’t mind me asking and posting this post from your cool channel ☺️👍👍
I've bought quite a few bits from Banggood and it usually takes a couple of weeks to arrive.
Thank you so much for the quick reply I was watching your new video now Im thinking of getting this too your channel is full of unique items and I really like it thanks again and have a good one :) ❤️👍
sup,
bought similar brake and disassembled it directly.. nothing special but a female USB-A port (but it’s connected via USB-C) and a few lanes that aren’t soldered anyways.
later in “calibration” it showed me 8 or more buttons. 🤔 confusing & weird because it seems possible to build a button box out of it. I’m wondering what said Typ A provides 😂
Where can I buy the parts to convert my handbrake to this?
Some are saying this doesn't work for Forza Horizon 4 because it's analog, (Which iirc just means that it has different force from 0% to 100% pulled right?) I currently use a flight joystick as a handbrake just fine but wanted to upgrade to a proper handbrake. Is anyone 100% sure this doesn't work???
good unboxing, I have a question, what is the use of the red metal part?, I have one similar and I do not know which is the sense of this piece
It was a catch for holding the brake in full lock.
Haven't you guy got recently an error with windows? (descriptor driver error 43) it suddently came up, the handbrake was working fine until 2 weeks ago
Well I got my USB handbrake but the mounting bracket the screw holds slightly off at the back they don't match how was yours? I told them grrrrr
One of the bolts is slightly angled, you can see it here. czcams.com/video/dyxRyXr8QnI/video.html
I wouldn't say it was a major issue, as it all held together firmly. I wonder if just using two bolts, one front and opposite angle on the rear would still be okay?
I have that chep handbrake whith a simple hard spring mod and works great
You know when you want to put it in horizontal position, you can adjust the bottom piece so you don't have that awkward part sticking up, that's what the extra holes in the bottom piece are for. This is a common mistake I've seen on many channels.
Sorry if someone's already mentioned this, I couldn't be bothered to read all the comments lol
Unfortunately, that doesn't work, I've already tested it. If you flip the bottom, piece, you'll discover the handle collides with the cover that houses the controller board when you pull the handbrake.
Get wrecked
@@SimRacingCorner I did it, it worked
@@Ja_Zer Nice. Do you have a picture?
@@andytheman72 yeah I can take a picture
Will this work with a drive hub for consoles?
is this any different from the ebay one?
Src! Could you please review your sequential shifter? Txs!
If you mean the one I was using in this review. It's a BJ Simracing model that they no longer sell. I also modded it with a different gear knob, and I had to redo the electronics so it doesn't fully resemble the original shifter anymore so in not in reviewable state really.
Hi, can you post me link for that app, what you using in video? Thanks
I just ordered one, but I need the hole pattern / drill template to prepare a mount for my rig. Could you give me the dimensions of those 4 holes to mount it? Like distance and diameter?
Hole spaces are as follows: 35mm width, 85mm length. M6 bolts.
@@SimRacingCorner Many thanks! That helps alot. Cannot wait to try the handbrake.
Can I use it with a T150/G29....!? How does it connect to the wheel...!? Thanks 😊✌️
It's plugs directly in into a PC USB socket, and works with any wheel. It's not consoles.
would it be possible to mount this like most handbrakes in cars are mounted so you pulled up on it instead of towards you?
The handle is adjustable and I demonstrate the orientation you have described this in the review.
Mine is very noisy, does someone have an idea about how to change that ?
Where can I download that handbrake program/software to change my handbrake settings as you did in the video?
Not even a please.
Is it compatible with ps5? And if not, which are?
I ordered the same handbrake, but I guess it was the one without the desk clamp. Does anyone know if I can order just a desk clamp somewhere or am I going to have to return it and order another handbrake that comes with the desk clamp?
You got any luck? I got the same problem gaga
anyone have any luck getting it to detect in Project Cars 1 or 2? WRC 7 is a no go to :(
It is detected in Dirt Rally 1 & 2.0, Assetto Corso, ACC & BeamNG.drive, all of which perform perfectly.
if anyone has any help i would love to know. I won't buy WRC 8 or 9 until i can use this on it.
would this be compatible with a thrustmaster tx base?
It doesn't plug into the wheelbase.
Hi, whats the "16 Bit" represent? I've found a cheaper handbrake online but it's only "14 bit"? Please explain thanks.
It refers to the steps of sensitively.
14bit resolution: 16384
steps
16bit resolution: 65536
steps
Hello SRC! I went through loads of comments trying to find the answer to my question but to no sucsess. So if u wouldn't mind me asking, do you know if this works with a Thrustmaster T300? Thankyou.
Yes it will, works with any brand of wheel on PC.
Is the sale still going?? I think im a tiny bit late for the sale
Hey when you get a handbrake does it have to match up with the bit of your pc ? Because I bought a 14 bit and it wouldn’t calibrate to my wheel setting so I just purchased a 64 bit which is my pc bit size so you think it’ll work ? !
The bit aspect is the resolution of the sensor in the handbrake.
I have a question.It is meant for t300 but is it all versions because i have the thrustmaster t300 alcantara.And something really unexplainable happend to my shifter that i cant understan.After opening my pc in the morning the th8a shifer didt work and wasnt showed in the app while being detected by the Pc.It had no effect on any games and didnt work well.What do i have to do to get it working
Sounds like your shifter has died. I owned a th8a shifter a few years back and it just stopped working the same way you've described your problem.
How the heck you have the head position turn like that in game? My view is stationary unless I manually move it.
That was recorded driving with a VR headset.
it work with Thrustmaster T248?
Can you flip the lower part of the handbrake so that it sticks out the way a streetcar's handbrake does? I know this requires disassembly but the mounting holes seem to allow that.
I tested that and it doesn't work, as in that orientation, when pulled the lever collides with the cover housing, containing the circuit board.
@@SimRacingCorner I see. Finding a horizontal handbrake for simracing is a bit hard so I was wondering if this worked. Thanks.
is there anywhere in the uk selling this?
Are these usb handbrakes universal ? So like would it work on my thrustmaster tx servo
Yes
What shifter was that
i just ordered mine on amazon and there is so many are they all the same ?
I really don't know, but I expect functionally they all operate identically.
the handbrake needs to be conected with the whell or pc to work togheter ???
The PC
You can adjust the spring force by turning the middle bolt in the back, I think?
You also reduce the throw of the handbrake by doing so.
@@SimRacingCorner Thanks!
Hi mate, great video. There is an aliexpress and a banggood link, what’s the difference between the two?
The difference is just the price, AliExpress is cheaper.
Great, thanks for replying!
Was the usb cable hard to push into the usb hole? I ordered this, and got it then go to plug the usb in and the little thing just snaps with ease. Wasnt to happy but i sent it back and am getting a new one from them.
It wasn't difficult in plug the micro USB. I've had no problems, but I can tell the micro USB connector is a fragile component and a yank could break it off the board. Use a cable tie to told the USB cable to the shifter to relieve any tension and you should be fine. Mine arrived already like that.
@@SimRacingCorner yeah yours looked like it went right in, mine i had too add some force witch caused that too snap but thank you.
does this handbrake work in games like forza horizon 4, asseto corsa and dirt 2.0? Because when I looked at the cheap, chinese handbrakes in amazon, it said it doesn't support those games. Anyone know about this?
Console or PC?
Can i Also use this on Xbox?
Does this work on PlayStation
Does this work on ps4
does it work on ps4 too?
Im new to sim racing im on ps4 is there a handbrake at all that is compatible with it and it doesnt cost a fortune? Thank you guys
Nope and that's Sony's fault. It's one of the reasons I moved to PC.
how did you get that handbrake properties test thing
pls reply
It's the Windows 'Game controllers' panel.
Hey man Reallt want to get is but do you know if it works on the g29 wheel and on the assetto corsa?
Yes, and yes.
I need some help… I bought one that is similar as this one, and Idk how to use it
Are you using this on console or PC?
Dose it work with ps4?
Will there be a large difference if I buy a 14 bit usb handbrake instead of a 16 bit one?
I don't think it would make a difference anyone could notice.
@@SimRacingCorner Thanks for the info.
does this work for the pxn v9? pls answer as soon as possible, im thinking of getting the pxn v9 as a gift... if no, please recommend me cheap and good drifting sim racing wheels with ebrake, thanks!
On PC yes
@@SimRacingCorner oh, so it does work in pxn v9.. okay, pxn v9 and just pc right?
Correct
Hi Sim Racing Corner, I'm having a problem with the mount bracket not marching up at the front to fit the screws? Mmmmmm
I experienced them being a tight fit as well. But I found by having all 4 bolts just loosely inserted into the threads, I was able to get them all in, then tightened them and that worked for me.
@@SimRacingCorner nice one I will try that but I'm sure it will thread the holes :/
@@SimRacingCorner I have tried it again the bracket doesn't match up with the handbreak shame :/ waiting for the people to get back to me.
P3DNA2598 Hi if your living in the US you can check several screws that you can find on Home Depot hope this help 👍
You mentioned PC, but is it capable of ps4 as well?
No it's not console compatible.
Hi, does this handbrake work in Forza Horizon 5 game on PC?
Yes
does this work for forza 4 ?