Making A Hunting Knife From A Saw Blade
Vložit
- čas přidán 1. 03. 2024
- In this video, I made a hunting knife from a saw, I tried to show all the stages of making this knife, I hope it will be useful to someone. If you liked this video, then subscribe to the channel, like it and share it with your friends! see you soon)))
The knife is beautiful. Especially the work that went into the handle. IDK if I would have the heart to get it dirty!
😊😊😊
Браво мастеру, молодец классный нож получился.👍👍👍🤝🤝🤝🔥🔥🔥🔥
😊🤝
Decades ago a friend did this. He bought large old saw blades (like 36"). Then he would take months drawing blade shapes, with welders chalk. When he had used all the space on a blade, he would pay me for the oxy/acetylene gas I needed to cut out all the shapes. Then spend months making all the knives(daggers/swords).
Some years later he gave me one that he had over estimated. I was a few inches taller than he, and this one was too big for him. Holding it while standing, the tip of the blade was dragging on the ground. It was a Philippine "barong", at least 30" long. It didn't actually fit being called a knife or even sword anymore. Just a scary weapon.
You sir are an artist.
Thank you for sharing your work.
😌😌😌
Loved this video. True craftsman. Subscribed to your channel. I have lots of old saw blades. You give me ideas. Thanks
beautiful knife..
I. Think. White. Liner. Gives. It. A bit. Of. Class. Nice. Job. !!!
You are very creative. This will inspire others.
Great job! All my compliments!👏👏👏
Renato
Simplesmente magnífica 👏👏👏👏
Spectacular
Ficou linda
Top de faca 🇧🇷
Belíssimo trabalho ficou linda
😊
Cant find fault with that at all. Very nice sir.... i need one for sure
Perfekte Handarbeit. Chapeau!!
Very nice knife and looks comfortable in hand.
Funny , I was thinking this morning that about making my own.
You will succeed 👍
Great work and very beautiful knife ! In french : chapeau bas !
Great job
saya suka menonton video pembuatan gagangnya
Nice work, thanks for sharing.
fachowa robota,gratuluje i pozdrawiam
Very nice.
Linda essa peça, excelente trabalho, parabéns!
☺️
Very Nice.
Great work
Magnifique, bravo
🙂👍
Hey man just found your channel ended up binge watching all your videos big fan of your work I am a beginner knife maker my self very limited tools only a angle grinder and hand files would be really cool to see a basic tools knife build! you just got a new subscriber man.
Thanks🙏 I am sure you will succeed, do not even doubt it!
สวยมาก
Prior to quenching, would you normalize a blade cut from a circular saw blade? Assuming it is some form of tool steel other then that I don't know it's composition?
Thanks.
Very nice work 👍
Nice job on the video. Beautiful knife. Thanks for sharing
😊
Красотища!!! 👍👍👍
Noice job, brah!!
Great Job 😄👍
Very like
Nice
Edward, you always amaze me when you post
😃👍
Sieht sehr gut aus 👍🏻
Wirklich schönes Aussehen und gute Formgebung.
😄 ich nehme auch eins ☝🏻 😄
😃👍
very nice!!
Hi 👋 there Edward?!! It's been awhile I It's going to be awesome 👌 👏 👍
Hi. Thank you 🙏
Absolutely love the outcome. Beautiful knife. But I have to admit, I cringed a little when I saw you drill through the blade without clamping it down to the drill press 😁
МАСТЕРУ - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Lovely knife, also great video. I was wondering, which type of grinder wheel, you had cutting? Please!
Nys work.
Sir if you don't mind, can you share knife drawing!
Hi. Unfortunately, I don't have an exact drawing. Because I draw all the sketches by hand
@@edwardknives8692 ok thank you sir.
I've accidentally cut my hands a couple of times before and by just looking at it i can tell thats a Mean edge there
😁
wow
😊
Magnifique Monsieur edward. Dans cette laborieuse œuvre , vous avez couplé l'artiste et l'artisan d'une main de maître. Vous m'avez épaté Monsieur Edward. À l'occasion je voudrais vous demander pourquoi vous avez utilisé la colle lors du polissage de la lame du couteau, pourquoi pas de l'eau ou de l'huile ? quelle serait donc l'impact de la colle sur l'acier. Je vous remercie pour votre réponse. Vous pouvez me répondre en anglais. Merci.
Hello, dear friend. I don't use water because steel is prone to corrosion. In this video I use oil😊
😍😍😍👍
Great job
I wanna this knife how to buy it please tell me
Should you hardener sawblades ? Or not ? Difrent schools show different ways
Hi. To begin with, I heated the saw blade to make it softer, and was able to drill it. Then I tempered it again)
What type of steel is the BLADE ? O-1 ?
You do not want to use the angle grinder for cutting out the cutting edge side of the blade. Heat from cutting will cause degradation of steel quality in this critical zone.
Any chance you can tell us the dimensions on the blade?
Saya melihat anda heat treatment before you grinder your knife. Apakah panas gerinda tidak membuat baja pisau anda menjadi lunak kembali ?
I've heard tales and fables about mythical creatures that can use superglue without getting it in their fingers, but like unicorns and Bigfoot, I just dont think they actually exist.
That's a weird way of telling people you're a homosexual. Good luck with all that princess. I'm sure all your Fortnite boyfriends are very impressed with you.
As A mythological creature 👻 myself 👽 I must take example to your unkind comments sir 😂
Ä.ü@@michaeldanmosley4169
Qual valor ?
Лайк. Подскажите пожалуйсто марку стали у пилы.
Спасибо 😌
Сталь 9ХФ
9хс,9хф не бывает@@edwardknives8692
Ohne härten wird das wohl nichts gutes werden😮
Желтая куртеечка прям настрадалась за время съёмок)))) и не понял, зачем заготовка первый раз побывала в печке?
А как-бы он её просверлил закаленую, это отжиг
👍
Do you sell these knives internationally ?
I would love to do it, but I do not know how it works))) And I would give out some knives to subscribers for free 😊
@@edwardknives8692
It depends where you are and how reliable is shipping method,
There are many options to receive money as well,
It shouldn’t be hard to find out .
Супер цена пожалуйста?
Пока что не продаю, раздаю товарищам)
Very nice, can you make me one
Нож острый. А как он держит заточку?
How can you tell if the sawblade is going to work for a blade and keep an edge? I have no idea how to tell what it's made of other than the teeth.
This steel is pretty good. This is a 9hf tool steel)
@edwardknives8692 do you have any recommendations on what blades I could pick up new in-store to make knives out of? My friend asked me to make him an ulu and I thought that a circular saw blade would be perfect for that
Yes, it will be great👍
the only thing is that it is susceptible to corrosion
@edwardknives8692 that's fine. I have made knives out of 1080 and 1095 steel.
You can shave with that baby!
Next vidio
Why would you want a knife made of something so thin, that's like less than 1/8 on an inch
I was thinking the exact same thing! A fillet knife maybe...
Why ruin the already awesome temper in the high impact steel? Just keep cool while cutting out. You had might as well just use any plate steel as you are removing the benefits of SAW BLADE!
You make too much heat. I have water going on while cutting out.
Du Kamerad, hoffe du bist mir net bös, falls ja drauf geschis...... , aber es nennt sich ja MESSER/KLINGE schmieden und nicht Messer ausschneiden, wie malen nach Zahlen, oder wie siehst Du das???? Ansonsten sehr schickes Messer!!!
Das kann ich erklaeren. Ist eine interkulturelle terminologische Sache. In seiner Muttersprache kann nur das als 'Schmieden' bezeichnet werden, wo man im Arbeitsverlauf am Metall wirklich mit einem Hammer 'rumhammern muss.
Where can you get the pattern?
You should inform what you are doing
*Probably the ass backwards knife video I've watched in awhile. There are many ways to make a knife. This is not one of them*
Прекрасно, просто прекрасно!!!
😊
Great video, thank you very much; question...the sharpening that starts at 7:15, what do you use?
Diamond bar for sharpening knives 🙂
Dope AF results, @edwardknives8692!