I enjoy all the fuckfaces commenting about the welding that have probably never touched a welder and never will ♥️ Clearly with all of the scrap exhaust with weld beads laying around, I was still learning, and still am. This welder is a shitty Eastwood China welder, I was butt welding, not using the right wire, and not doing anything the “right” way. You can’t “run a bead” on anything that I was doing. It held as long as I needed it to, and I later on welded an entire turbo log manifold together that’s still holding 9k miles later. To everyone else who’s dead grandpa that didn’t raise their kids and grandkids to be cunts to strangers on the internet, thanks for the views and comments.
Fuck the haters man welding is all about practice 2 years ago I couldn't weld half as good as you. Now I tig for a living. Practice is the only way love the work brochachi
Welp as long as there's no leaks who cares. No one's going to look underneath and say LOoK aT The wElD jOb gUyS. Unless you bring it to jiffy lube lmao
I think this was more of a fitment issue, you shouldn't really just butt up exhaust pipe like this, expand the pipe or get an exhaust fitting so the pipes fit together and overlap so you can actually weld it clean.
You need to commit to the welding process and get a bead going! Also, making sure the parts actually fit together would be a plus. Other than that, good job sounds nascar.
I just got some flowers Tec bullet mufflers and I hate how they sound does this muffler have the raspy crack like a glass pack muffler or do they have a deep tone like a regular muffler flowmaster has
Was looking for a video on this muffler with a cam I have a 3” running straight from the turbo out the side like yours and it’s just disgusting sounding up top lol definitely putting one of these on when it gets warmer
Your sarcasm made this video worth watching alone😂..came out mint even tho your welds look like Ray Charles welded them with his feet lol jk ..new subscriber truck sounds amazing, keep on keepin on🤙🏼
How loud is this? I want to buy it but I don't want to waste my money since my current exhaust is too loud. So loud it hurts my eardrums. Asking since video usually doesn't do the noise justice.
Dont listen to anyone who says something aboit your welds aslong as they hold they are good and atleast you are doing things yourself if you fuck it up you can try again
Thanks for the input. I had barely any experience and was still learning in the video. I welded an entire manifold together on this engine later on that’s still holding today 9k miles later
If it was getting hard to see with your helmet, get a better helmet bud.. You're burning the F out of your eyes, not too mention heading for a nice round of flashburn!
My guess is that it would depend on your local noise ordinance. You can google the local statutes and there might be a decibel level of acceptable volume. I guess you’d have to take a chance and throw the muffler on then have a machine that could tell you the decibel level of your exhaust to verify if it would be within the tolerances of the law.
Devin Curtis I appreciate the feedback. Actually my neighbor has given me a bunch of scrap and I’ve been practicing quite a bit since then. Not saying I’m any good but I’ve been practicing
I enjoy all the fuckfaces commenting about the welding that have probably never touched a welder and never will ♥️
Clearly with all of the scrap exhaust with weld beads laying around, I was still learning, and still am.
This welder is a shitty Eastwood China welder, I was butt welding, not using the right wire, and not doing anything the “right” way. You can’t “run a bead” on anything that I was doing. It held as long as I needed it to, and I later on welded an entire turbo log manifold together that’s still holding 9k miles later.
To everyone else who’s dead grandpa that didn’t raise their kids and grandkids to be cunts to strangers on the internet, thanks for the views and comments.
Well I weld for a living. And that was hard to watch. Cringey
@@dylanthompson6427 awesome!!!!!
😂😂😂😂😂
Fuck the haters man welding is all about practice 2 years ago I couldn't weld half as good as you. Now I tig for a living. Practice is the only way love the work brochachi
Welp as long as there's no leaks who cares. No one's going to look underneath and say LOoK aT The wElD jOb gUyS. Unless you bring it to jiffy lube lmao
My grand dad was a welder, he just turned in his grave watching you weld. Set your heat and feed speed correctly and lay a bead down.
Lmfao dead 💀
I think this was more of a fitment issue, you shouldn't really just butt up exhaust pipe like this, expand the pipe or get an exhaust fitting so the pipes fit together and overlap so you can actually weld it clean.
Andy I'm glad you told that Joe Biden loving gun banning clown off. He a welder like I'm a G.....
😂
You just helped me make up my mind. Flow FX is going on my ride. Thanks!
Never underestimate a man in his garage... with a sawzall
Talredhedkid lmao!
Ha ha your commentary is awesome! Don't worry about the welds as long as it works no worries. Thanks for sharing.👍
lol thanks I just act like my idiot self, glad it’s entertaining for some 😂😂
Your video was more entertaining than most and gave a idea of how the mufflers sound.👍
Excellent video. My favorite is probably the 19:58 mark though. LOL!
Sounds very Nice, I have an 86 Squarebody with a 5.3, soon to be 6.0
ZE_GERMAN sounds like a whole bunch of fun. I’m about to start this thing up after installing a turbo 😳😳. I should have it started by next week
You need to commit to the welding process and get a bead going! Also, making sure the parts actually fit together would be a plus. Other than that, good job sounds nascar.
I just got some flowers Tec bullet mufflers and I hate how they sound does this muffler have the raspy crack like a glass pack muffler or do they have a deep tone like a regular muffler flowmaster has
Oh yes the old foot clamp absolutely is the best choice
Was looking for a video on this muffler with a cam I have a 3” running straight from the turbo out the side like yours and it’s just disgusting sounding up top lol definitely putting one of these on when it gets warmer
Your sarcasm made this video worth watching alone😂..came out mint even tho your welds look like Ray Charles welded them with his feet lol jk ..new subscriber truck sounds amazing, keep on keepin on🤙🏼
That welder sounds nice my Boi 🔥👊👍
A pipe expander from a tool rental place would have made your job easier!
Minty 👌 19:58 😂😂😂
Hahaha.....that was the best!!! FUCK OFF PB Blaster (j/k I love you).
Hey thank you for the video and the sound !
Sounds bad ass man
This is killing me!
At least we know you have tool Enstien 🧐😭
Whats inside the flowfx muffler? Fiberglas mats or steel wool packing?
No idea
bro. what are you doing with that cutoff wheel??? :D that's how they end up in your face! thanks for the vid. 👍
lol I take safety a bit more seriously these days
Why post an exhaust video and not rev it up?
How loud is this? I want to buy it but I don't want to waste my money since my current exhaust is too loud. So loud it hurts my eardrums. Asking since video usually doesn't do the noise justice.
I'm wondering the same haha
I enjoyed it. I swapped the muffler for a turbo shortly after but it was pretty nice while I had it. I’d ditch the 90 degree bend tho
Very loud, I’m bout to remove mines
For all people back at pendeo😎🍒
sounds good
thx for sharing
I just took a FlowFX off my truck. Too much drone for me.
Can you make a video of you taking off cruising and wot I'm thinking bout getting these
Keldon Alverson I definitely can. Just keep in mind that I hollowed out the cats too
I did a ls swap on my colorado headers bout to run dual if I like the next video u post
Dont listen to anyone who says something aboit your welds aslong as they hold they are good and atleast you are doing things yourself if you fuck it up you can try again
What do you think this would sound like on a 4 cylinder?
Like all straight through mufflers on 4 cylinders, imagine a bus loaded with kids all fart'n at once
@@oldfart8501 😂😂😂😂😂😂
I put one on my 06 RSX it sounds pretty good, and I also have em on me 92 Chevy 350
sounds good....
How much louder is this muffler compared to stock?
Nick Dunn with the stock y pipe, probably not louder at all.
@@guitargod66 wait so if I want my ride louder I shouldn’t go with the fx??
i’m trying to decide between the flowmaster straight through and the magnaflow straight through… What do you think?
I don’t have experience with the magnaflow but I’d buy the Flowmaster again for sure
U dont cut the ends of the muffler off
Wonder why he did that muffler should had fit over exhaust pipe
19:30 - new sound
Is the drone tolerable?
No I’ll be removing a 3”
God I hope your not planning on using that camshaft in an engine after that
That was the stock cam
Me gusta más la soldadura 😁😁
love the video. but you need help on that welding brother
Thanks for the input. I had barely any experience and was still learning in the video. I welded an entire manifold together on this engine later on that’s still holding today 9k miles later
@@guitargod66 .. I still learning too.. I use a harbor freight welder no gas.. I did my muffler on my car.. came out pretty good..
If it was getting hard to see with your helmet, get a better helmet bud.. You're burning the F out of your eyes, not too mention heading for a nice round of flashburn!
I said that while I wasn’t wearing the helmet 😀
omfg those fkn welds! hahaha!
🤷🏻♂️
Does anyone know if these mufflers are legal?
My guess is that it would depend on your local noise ordinance. You can google the local statutes and there might be a decibel level of acceptable volume. I guess you’d have to take a chance and throw the muffler on then have a machine that could tell you the decibel level of your exhaust to verify if it would be within the tolerances of the law.
@@guitargod66 thanks 👍
@@guitargod66 oh what welding machine did you use?
@@oscarvillarreal8951 just an Eastwood 110V mig with regular mig wire
@@guitargod66 does it use gas?
Wish I could weld period. Some skill is better than no skill. Nice video.
Get out there and try! You will have fun if nothing else
Race truck?
this was defiantly painful to watch
You still getting drone?
Arturo Mendez yep
Can I put it on a Toyota Corolla??😂
Long tube headers?
Tyler Lindsey all factory exhaust but I cut the cats off, punched em out with a pry bar, and welded them back to the y pipe.
🤣🤣Fuk that cam 😅😅
Stock cam 🙏
This was painful to watch
It was painful to record !
Go buy scrap metal and practice welding. Honestly painful to watch.
Devin Curtis I appreciate the feedback. Actually my neighbor has given me a bunch of scrap and I’ve been practicing quite a bit since then. Not saying I’m any good but I’ve been practicing
@@guitargod66 find a speed and amperage and stick to it. That shit was cringey.