Hi Brian, great design and I’m planning to have a shot at this. Would you tell me what size pots you have used here? Also the drill bore diameter. I couldn’t see it in the video. Cheers..
@@francisdiocton8052 thank you for watching and commenting, I’m using 90mm uPVC storm water vent pipe. It is a common and inexpensive pipe size here for storm water transfer.
Thanks for replying. I'll try to see if we have similar pipes here in the Philippines. I'm growing fish and I want to pump the water in the fish tank to a system such as this one.
hey mate, do you think you could get away with closing the 90mm ends and using a 19mm tub outlet towards the top to help with keeping a reservoir in the pipe as an alternative to the glued half cut plastic siliconed within the pvc pipes?
How do you control the water level inside the pipes? I couldn't see that you set a height for it to begin to return. Also, how often do you cycle water through and does any water stay in the pipes while it's not pumping? Or do they fully drain?
The plastic quarter moons glued into the end of the pipe keep the nutrient solution level with the bottom of the net pots at all times. The system runs 24/7.
Hi Brian, thanks for taking the time to create and share videos for us 🙏 Does either this horizontal system or your vertical system have to be on a slight angle for the water to flow back to reservoir?
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
Nice job for sure my friend.....
the extra hose/valve to reduce flow by sending water back to the reservoir is a good idea. I have used this before and it works.
Love ya work Brian,
Thanks Daz, Happy New Year mate.
Great post brother!
Awesome job done showing us how you built this system. Stay safe my friend!
Thank you Sir. Happy New Year.
Nice!!!
Thank you Sir.
Hi Brian, great design and I’m planning to have a shot at this. Would you tell me what size pots you have used here? Also the drill bore diameter. I couldn’t see it in the video. Cheers..
3” (75mm) net pots . I drill the holes with a 73mm holesaw. The holesaw is in a down light kit from the hardware ( Bunnings).
Nice design. Simple and efficient.
Thank you, simple is beautiful.
Hi Brian, thanks for replying. May I ask about the pipe diameter you are using? I plan to grow lettuce similar to this setup.
@@francisdiocton8052 thank you for watching and commenting, I’m using 90mm uPVC storm water vent pipe. It is a common and inexpensive pipe size here for storm water transfer.
Thanks for replying. I'll try to see if we have similar pipes here in the Philippines. I'm growing fish and I want to pump the water in the fish tank to a system such as this one.
@@francisdiocton8052 look for Rafael Pagaling there in the Philippines. He has Zennor Farm there, hydroponics. He should be able to guide you.
hey mate, do you think you could get away with closing the 90mm ends and using a 19mm tub outlet towards the top to help with keeping a reservoir in the pipe as an alternative to the glued half cut plastic siliconed within the pvc pipes?
You certainly could do it that way, and many people do it like that.
How do you control the water level inside the pipes? I couldn't see that you set a height for it to begin to return.
Also, how often do you cycle water through and does any water stay in the pipes while it's not pumping? Or do they fully drain?
The plastic quarter moons glued into the end of the pipe keep the nutrient solution level with the bottom of the net pots at all times. The system runs 24/7.
Hi Brian, how much to buy one of these builds off ya?
A complete 24 plant system with stand, net pots, reservoir, new pump and fertiliser $400.00 at this point in time.
Hi Brian, thanks for taking the time to create and share videos for us 🙏
Does either this horizontal system or your vertical system have to be on a slight angle for the water to flow back to reservoir?
No, I make the pipes level. Only needs a tiny fall, or none at all as the water will find its own level, and flow back to the reservoir.