SNW44- Build your own FEATURE LOADED router lift- also works as a mini router table!
Vložit
- čas přidán 7. 07. 2014
- STUMPY'S WEBSITE►www.stumpynubs.com
Get plans for the new lift here: stumpynubs.com/product/homema...
The router plate mentioned in the video can be found here: www.rockler.com/rockler-router...
How did I miss this gem from back in the day? Glad I found it.
I love it when someone comes up with a good idea and shares it. The plans are cheap and easy to follow so, yes, take my money, you absolute legend.
The 10 hour rule cracked me up. The no bending over rule hit me like a 10 megaton truth bomb
Been waiting for the old stumpy to come back, I watch your video,s just as much for the humor as I do for the woodworking tips.
This earns a subscription. What a great deal 5 bucks for the plans! Excellent!
Enjoy your videos and the humor. Oh, some good ideas too. Keep making them!
This is the best introduction to any of the woodworking videos I've seen.
"If women don't find you handsome they should at least find you handy." Red Green
I don't understand why you don't have 1mil subs. absolutely fantastic show. thank you so much for the hard work you put into these videos.
Very nice Stumpy! I like the mini router table idea.
Thanks Steve!
I really like this channel. So helpful in so many ways. I wanted this build to be easy for me. I hoped and believed it would be. I've never operated a router lift. So I've been having to get my head into the rhythms of what I understand this tool is capable of doing. I'm a somewhat intermediate in my wood craft skills, but I'm also intensely ADHD. Before I can build something I have to have it fully working in my head, to see it's various details in my mind's eye. The plans I bought might be straightforward for another brain, but I really wish I could see some video of the lift completely in action...being set up with a new bit, adjusted...etc.
I'm almost done with the build, but it's taken me three times the amount of time I'd hoped it would. I've had to take it apart and put it back together too many times.
So many of the YT channels present their builds as so easy and slick. I just want to offer my two cents for other folks out there who might also be challenged as I am.
Thanks for all you do on this channel though.
Thanks for putting a smile on my face. You need to write a book 'Stumpy Sayin' I like your buddy too!
great idea and great design, thanks Stumpy.
Glad you liked it, Nick!
That is a perfect addition to my Ryobi BT3100 Table Saw. I can make a table for it and drop it in when I need it. When I don't, I can drop in a piece of wood.
You may have noticed I used a Ryobi router in the video :)
Great video, I loved the light hearted approach and the corny jokes. Keep up the great work
I love your rule. Excellent plans for the router. Thank you so much...
I don't have a 10 hour rule in my shop ... it is considered edible until the bugs carry it away.
Bugs are protein! Eat them too, roast, then cover in chocolate.
I've heard on good authority that the people of the remote horsdoover mountains of Toozpickistan roast bugs and use them to make coffee. Really. It's a thing.
Thanks for another great project video Stumpy.
Excellent, everything.
Thank you for sharing.
great idea, I think I will build one for my shop! Thanks, I love all your videos!
Can’t believe I’m just finding this. Looks ingenious!!
Looks great man. Another excellent product by Stumpy
Are you related to Sid Vicious? :)
Great video and the plans are excellent. Thanks.
you are just crazy enough to make me watch more of you videos.... Thanks
Good lift Thanks Stumpy
I just bought the plans. I can’t wait to build it!
I take it stumpy is in character in this.
I LOVE your intro. Every time I see this I crack up!
Big fan, love your builds. I did this one. I added a lock nut and made it more stable, and not self adjusting. Thanks for the inspiration.
"$25 router lift"
"1/2 inch at the least"? LOL. Love the project. Thanks for the vid. Keep em coming.
Lumpy Chubs, I love your sense of humor. Even if no one else finds you funny, I do. Can we get you to do a whole series on efficient(no bending) woodworking DIY projects?
On my box I used the exhaust port to blow into the box(positive pressure) and the vac hose on the fence. It worked so well I use that set up on everything now.
Nice lift Stumpy! Thanks for the entertaining videos.
I do my best!
Ok I finally bought these plans .... Best. 5 bucks I ever spent. I have to make a few adjustment based on the router I used and the Kreg router plate I already have in the table saw wing . But it was easily adaptable its installed and work ifs great . Thank you. Stumpy
any tips on getting / keeping the router brackets, track, box, all square to the top? Especially which parts interface is best to use to fine-tune. Many thanks, love your designs and videos!
Another good video and great idea for a useful addition the old shop.
Hi Stumpy -- this is a great design. I just completed the build for it from your plans (minus the plate which hasn't arrived yet). One question I have: you mention that bit changes can happen above the table, but I'm not sure how. My router is similar to the one you have pictured, with a spindle lock below the collet. It seems like at the highest extension, it will still be below the plate, and inaccessible unless I cut a very wide hole. How are you engaging the lock in yours? Thanks!
Im with you! Heart failure and sciatica have made me "waist up" kind of guy.
stumpy i need one of these to keep at the work bench .great design .
Glad you liked it, Eddie!
Definitely one of your best videos and it makes very good sense. Thanks
Wow, the best? Now I have to top it in the next one...
Stumpy Nubs No doubt you will top it if cabin fever does not strike first.
do you take the springs out of a plunge router before you start mounting it in the table lift, graham
How easy is it to change the bits out in this design? Looks great.
Excellent video and your funny
" Great work guys"
I built this and have been using it for a couple of years now. It's really a nice design. Here are my comments now that I've used it:
1) The nut on top for height adjustment. Provide access for a nut on the bottom also. 90% of the time, that top nut is exposed. But the day will come where some setup will cover it - like a featherboard. Access from the bottom on those days is golden.
2) I had to slot one of the walls to get a collet wrench in to grab the spindle. Easy modification.
3) A "gaging hole" is a good add. It's hard to measure to the top of some bits consistently because of their shape. If you put an access hole through the top of the table where you can put in a dowel that loosely goes through this hole and touches the internal lift mechanism, that's FAR easier to use for repeat setups. It's easy to zero a bit by raising it until it lifts a gage block straddling the top. But after that, raising it 1/8" (or whatever) is harder to do accurately. With a gaging hole, you can drop in a dowel and use that flat surface for measuring or similar to a story stick.
Great tips, thanks!
I have been looking at a router lift. This is a good design. Have you ever looked at using square threaded rod.
I'm working on an "ultimate" work bench for my garage shop. I've never really used my router since I've not had a good bench to work from. Since I'm tall I really don't like bending over. So the lift part is a must. This box will make a great addition to my workbench. I've got a table saw inset and I'm working on a "hideaway" sliding miter saw. The router will really finish out the bench. I like the idea of drawer slides and hose clamps.
Half way through. Great Plans...
Good morning Mr Nubs. I think I'll have to build this. It's a sweet sweet design. It just seems to ooze wood working goodness. And I also purchased a new to me router a while ago for this purpose. L&FR, Symon the window cleaner.
I ran a window cleaning business for 20 years. We did mostly residential work and medium commercial buildings (3 stories or less). Great money but not so much fun when it's cold or hot out.
always a good laugh and a good idea. thanks stumpy
My pleasure...
Great video, do you know the total cost to build your lift would be.
I've used 1/4" acrylic for my insert and really not had a problem with it. So long as you have enough support from the ledge and the insert isn't to big.
I bought the plans and I have a phenolic router plate from a homemade table i'm not happy with so planning on using that - but looking at your finished product I'm wondering if I have to drill a giant hole in the plate for the ratchet lift mechanism and if so - what's the best way to do that in that type of plate. If I or someone else bought the rockler plate hows does the ratchet mechanism work with that - not seeing mention of it in the plans. thanks!
It starts at 2'40" Thanks Srumpu Nups!
Hi, A pleasant good morning! I'm all the from GUYANA; the only English country on the continent of South America. The items you have mentioned are
Not available here. As a consequence, what substitute material could be used to make the plate? I would like to know how to get the full description to build one such device. Thanks.
great design!
Chris
Thanks Pine!
The lathe In the background reminds me of the old cabinet tv with the small tv on top
Excellent
Are these plans easily adaptable to a Porter Cable 7518 router? I believe the router diameter is 4-7/32".
This is the second time I watch a video on this lift and I still have no clue what you did
🤣🤣🤣🤣🤣🤣🤣🤣!!!!!!! I can definitely relate to leaving what ya drop on da floor & walking on by!!!!🤣🤣😁
I just built this with a craigslist router (2-1/2 hp Skill $50...brand new in box) and got the Corian top (a full 1/2") Habitat for Humanity ReStore. I actually got a piece of Corian that was large enough for four router plates and it only cost $10. Don't forget to check Habitat for Humanity Restore for you projects!
good tip
Anthony Oltmann every time I go to the habitat restore close to me they have everything priced at or above what retail price at Lowe’s or Home Depot is and that’s fricken crazy. Who ever prices this stores items tho needs to be fired cause that store is losing its ass in sales. I have seen items sitting there for over a year and not be sold. I guess this employee never learned that if you make a little on a bunch of items it’s better than making some on one item that sits on the shelf for a year paying rent and utilities.
I was in there over a year ago and they had a brand new, unopened bucket of drywall mud and I needed some at the time so I grabbed it and didn’t think to check price until I was looking at something else and the price on the other side of the bucket caught my attention, it was $4 more than the same bucket of mud at Home Depot, so I walked out and went straight to Home Depot and bought it there, along with other items I probly could have gotten at the restore. I went back 6 months later and that same bucket was still there at the same price, I haven’t been back since and will not go back either.
Would be nice to see a version for the Huskey ccollapsible work bench.
building this for my assembly table, then making a sanding grid for it to change to, thanks!
Ha the ten hour rule....that's awesome :-) Very cool lift.
Donuts never go bad.
Very Good:
With the router in-closed and dust collector hooked to the box can or does the router get hot due to it needing fresh air at the bottom of the router to keep cool, I ordered the plans
That was covered in the video. The airflow from the dust collection keeps it very cool. Even without the dust collection on, it would only get hot if you ran the router for a very long time.
Thanks for your response, I over looked that
Take a look at the Australian made Triton router. It's a plunge router and when you take out the big spring it fits under most router plates and then lifts perfectly. Its sweet!
Does your plans come in metric? Thanks in advance 😊👍
GREAT INTRO!
Are you aware that the DeWalt fixed-base router you showed has an optional plunge base for it? So, it would also be a plunge router, which you said not to use... ;)
Make a similar enclosure for a circular saw, jig saw, and so on..... One bench with a fence and miter slots and you have a modular tool system for small shops!
on his site, there is a workstation similar to what you are saying. hope to see a video of it.
Why is the box 13.75 tall? My cabinet has limited vertical space. Can the box height be reduced by 3/4 - 1"?
Aloha all y'all... and our favorite Latin lurker, et al.,
@4:10 or so... you mention the thickness of the plate to be 3/8ths of an inch thick...
OR
at least half an inch... (huh?)
Isn't half and inch 4/8ths... so we're looking for a plate 3/8ths of an inch OR at least 4/8ths of an thick... LOL
* * *
I know you meant half an inch thick is the target with 3/8ths as a minimum...
I was an English teacher and librarian in another life...
I'm just poking you in the ribs for fun over your flip in logic... nothing serious.
* * *
I really love your presentations...
Even from so long ago... (wink)
* * *
My final question:
Isn't there a place where a person could purchase a router motor without the expense of buying a complete commercial model and then deconstructing it?
Seems to me that we might be able to purchase only the router motor for half the price of the whole thing, yes?
* * *
Until that time. . .
I looked on the manards web site for the router plate but couldn't find the size router plate do I need to have it cut down?
I love this idea but what if I needed to pull the routworker out for work by hand?? Any ideas?? I found an idea for a router station by Grant Thompsons "the king of random" flush mount router station but I want to use your lift idea.
jermo888 - The back panel comes off and the router motor is removed with two screws by releasing the clamps. But, frankly, it is always a better idea to leave your router in your table and have a second one for hand held use.
stumpy youre a comic keep up the good work .from uk
Glad to know you Brits have a sense of humor!
you have to have a sense of humour to live here or anti depressants
"If you lay in bed awake at night worrying about your router table... well, what's the point of going on" - the funniest thing I have ever heard in woodworking.
I might have missed something, but I was wondering how easy it is to switch out bits with this table. Can it possibly lift high enough for the collet to push out the top?
I just raise the router to the top and put the wrench in the hole. A larger hole would help if your wrench is large. I may even enlarge the hole and add a rabbet around the edge, then make some matching inserts. Of course you can always just buy a commercial router plate with inserts and attach the lift to that.
how do you turn your router on if it is enclosed in the box? I am very new, sorry
Top plate from Menards.... Now called solid surface cutting board. The Rockler router plate link is broken as well but a quick search will pull up the newest version.
After using this, have the drawer slides gotten gummed up by the dust?
Nope.
Nice intro... :)
Hey Stumpy... followed the links to buy the plans and got the Hand Held Mortiser plans. Checked back and when I add to cart, the wrong item comes up. Please advise when the link is correct. Thanks.
Sorry, I fixed it this morning.
I would like to see this plan modified to also work with the WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander, interchangeable between router and spindle sander, or another combination
Nice lift stumpy, but most of all I like your humor. I was wondering when you were going to put out another vid.
Took a little break while I was working on something top secret :)
I can hardly wait to see what it is. I'm sure it's something original and amazing. Any hints ? :)
An engineer is a person who will spend 30 minutes developing an elegant solution to something they could have brute forced in 30 seconds. :)
"save big money at Menards." Which department at Menards did you get that thing?
Kitchen department. They also come in pretty colors...
+Stumpy Nubs (James Hamilton) we don't have a Menards in Louisiana. Does Home Depot or Lowes sell them? I will check HFH Restore.
@@StumpyNubs could not find that product, probably not available now
how do you change your bits, router that is
You have a very strange sense of humour, even stranger is that its identical to mine.
I know how it is for you, Stumpy. The day I bought my first router, women were throwing their apartment keys through my car window before I got out of the parking lot. There's something about owning a router that gives a man that alpha aura that women just can't resist. Remember Beatlemania? Same thing.
Wait. If you remember Beatlemania (like I do), you're practically fossilized.
Forget about it.
These days, if a woman asks for my phone number, it's because she thinks I'm a plumber.
u r awesome
Like it alot, but what about changing bits????????
I enlarged the throat opening and made inserts. There's another video about that on our channel.
@@StumpyNubs link???
What is your cold one of choice?
+Barry Dobson I like IPAs. We have a lot of microbreweries here in Michigan. But when I'm working in the shop, I drink soda (pop).
I say that cause you said..." 3/8" or 1/2" at the least "....? Good job though! Just busting your chops lol!
Stumpy... Great videos, but how about doing the actual build video(s). Some of us learn better by watching rather than trying to work with drawings and directions. TO have both directions AND a video to follow makes it all come together. Also - it would have been great to show this box being installed into the main router table.
@ 2:55 Acrylic Cutting Board?
nice
thanks
Ok, I guess I am confused. My wife says I am, and she is never wrong! If you build both the new router table (slider) and the lift box, how do you tighten the router lift lock when it is in the router table!??
There is an opening on the front of the table for access.
You mean you have to bend over!!!?? ugh!
Mark W to tell you the truth, I never use the lock. It stays solid without it.
Ahhhh, NOW yer talkin'!!
Bought a set of plans for this lift the other day! ( as well as your router table). The only let down was there was no video of you building yours. Would've been a little nice to see your techniques of building it I guess. And why nothing on how much plywood to get to complete the job? I'm not trying to act like Debbie Downer, the plans look great with a ton of detail , but a little more info would've been even better! Thanks!
Ben Redelings
It's a pretty small project. I guess I just thought it went without saying that it wouldn't take much. There is a full cut list with all of the part sizes on it, along with step-by step build instructions, including photos. But you are correct, there is no diagram showing how to cut each piece out of the sheet of plywood.
It’s called Corian made by DuPont, otherwise it’s just solid surface