MIDORI 5L-V2 Mini ITX PC Case. How to build.
Vložit
- čas přidán 29. 08. 2024
- This video is instruction manual for MIDORI 5L-V2 and 5L-V2.1.
Please check the link below for latest version.
• MIDORI 5L-V2.2 Mini IT...
Video: Midori Computer Inc.
Music: 2:23 AM (by Sharou) - Věda a technologie
Finally got mine!! Love the fan design! Best sff case I've owned❤
Thank you.
What an amazing piece of art. You did a great job. I personally would love to see the fan lid in aluminum as well instead of being black. But that`s just my personal taste. お疲れ様でした。
Thank you.
Just ordered one on EBay, so excited for it!
Thank you!
リアパネルそのまま使えるのとファン増設は良いですね。素晴らしい設計に脱帽です。
ありがとうございます!頑張って改善しました。
Are all the screws and nuts included with the case and are they lanbled in the manual /organised Edit: I looked at the product page it has the little nuts and bolts listed
Yes!
Will you consider stocking black 7660b with custom length cable for this case? Would like cleaner build without excess cable.
Thank you for your advice.
I will consider it.
Is it somehow possible to use the modular Enhance ENP-7660B?
It is not compatible because cable passage would be blocked by modular connector.
I cannot guarantee but it might work with some luck.
今使っているケースがこれより小さな中華のものですがグラボのサイズ制限がきついのでこのケースを買おうと思います!
電源も流用できるから費用は抑えられそう
ありがとうございます!
Will it be offered in Black?
I am considering....
Would love one in black
OK, I will consider.
@@Midori-computerI already ordered it but if you make it in black I’ll order another one
@@Midori-computerplease make a black version i will consider ordering one
Ordered mine last week … it’s in Alaska atm. I’m guessing I’ll get it sometime next week. Is the Noctua L9 the biggest cooler I can fit or can I go slightly bigger? I have an Alpenföhn BLACK RIDGE I’d love to use in it!
Thank you for your order and comment.
Noctua L9 is compatible but Alpenföhn BLACK RIDGE is not compatible.
Do you have stocks for &.5L variant on your website? I'd love to snag one
Yes, You can get from midori-computer.com/
こんにちは、
私はドイツから来ました。
とても素敵なケースです!
どこで購入できますか?
よろしくお願いします
トーマス
Kon'nichiwa, watashi wa Doitsu kara kimashita. Totemo sutekina kēsudesu! Doko de kōnyū dekimasu ka? Yoroshikuonegaishimasu tōmasu
日本語が上手ですね。
下記リンクから買えますよ。
midori-computer.com
this is amazing.❤ ill order one
Thank you!
My inner Monk protesting against the Montage of this poor L9a with different Screws. :D :D :D
Just kidding - very nice Case.
Thanks
Would a RTX 4060 low profile gigabyte fit in this case?
Yes, of course!
Awesome! Probably will buy one next week! How long is shipping to US east coast usually if you happen to know??
do you have any shipping ? Aliexpress Toaboa or else
The goods will be shipped by Japan post or UPS.
Hello,
I come from Germany. A very nice case!!!
Where can I buy it?
Best regards
Thomas
We would appreciate if you could order from the link below.
midori-computer.com
What PCI-E 4 riser would you recommend?
You can buy on AliExpress. a.aliexpress.com/_EzWjVzf
The length is 185mm.
I will order black color once you have it in stock.
Thank you
@@Midori-computer I see you have dark grey in stock now. Any idea if you will have black ? How long wait ?
We do not make pure black color case so far.
Dark gray is the closest to black in our current product.
hi, max GPU height is defined as 43mm. PNY GEFORCE RTX 4060 8 GB Verto has height of 41mm.
Is it going to be bad for GPU thermals if there is only 1-2 mm clearance between GPU and the case side?
in the video MSI Ventus is used, if I am corrent it has 42mm height. How are noise and thermals in this case?
There are a lot of holes throughout the side panel, so there is no problem even if the gap between the side panel and the GPU is small.
Heat is removed by two fans at the top of the case.
The assembled PC is quiet and heat is not an issue.
@@Midori-computer thank you for fast reply.
and regarding the width of the GPU, max is 131mm allowed, KFA2 has width of 133mm. Is the limit a hard requirement, or 1-2mm more is OK?
It may be fine.
If the nut of the case interferes, remove that nut.
Make a video for 7.5l version please!!!
Power button diameter? 16mm or 12mm?
It is about 14mm.
This but 18 litres , matx support 158mm cooler support.. consider please
It is difficult...
@@Midori-computer why
when will this be instock again?
MIDORI 5L-V2 will be modified and restocked this weekend.
I'm going to do some surgery on this thing to fit a 267mm GPU in there. Since the Titan RTX, 2080 TI, 2080, and 2070 SUPER are all that length
I would appreciate if you could share the picture or video of your modification.
sold out now, when will we have a new batch soon?
MIDORI 5L-V2 will be modified and restocked this weekend.
@@Midori-computer Thanks for the response. And what will be modified btw
The followings are revision history.
V2.1
Dimensions are adjusted by 1 to 2mm for improving.
For example, Max. GPU size is increased from 261mmx43mmx131mm to 261mmx43mmx133mm.
V2.2
PSU space and PSU’s cable space is increased.
Drive bay is removed.
Fitting of Fans and Fan grill (7) is improved.
@@Midori-computer Are you sure i can fit a grill for the top fan
Do you mean that you would like to fit grill under fan?
is this case shipped flat packed or assembled?
It will be shipped flat packed.
@@Midori-computer are you planning to make this in black?
Not so far. But I would like to try other colors.
When will the case get's restocked?
MIDORI 5L-V2 will be restocked within 2 months.
when is it going to be available again? i have your v1 and man, im so stoked to replace it with this one lol
Hello,
Thank you for your contact.
MIDORI 5L-V2 will be restocked within 1 or 2 months.
@@Midori-computer 頑張れ, hope for fast restock
@@caleb6373 Thanks
By any chance will you sell the v1,I am interested
@@bondadadhanush8864yeah can sell it but i wont have the v2 until maybe 3 weeks 😅
No bundled Flex PSU this time?
No bundled PSU because we do not have enough stock of PSU now.
so the V1 is discontinued ?
V1 is discontinued...
@@Midori-computeris the V2 compatible with MSI MECH X2 6700XT GPU ?
I is not compatible...
How much does the case weigh?
It is about 1.4kg.
will it be offered in white
I am considering which color should be made next.
The white would not be bad.
how to order and ship in philippines
Could you please check in the link below?
midori-computer.com