programming for dodge charger 2011 to 2018 models using Xpad 100 plus from Xtool
Vložit
- čas přidán 5. 09. 2024
- For 2011 2012 2013 2014 2015 Dodge Journey Remote Car Key FOB 5B M3N-40821302
For 2011-2018 For Dodge Charger
For 2013-2016 For Dodge Dart
For 2015-2018 For Dodge Challenger
For 2011-2018 For Chrysler 300
here is the link for the programmer
www.amazon.com...
Gonna get me a hellcat tonight
Thanks gang you saved me alot of money with this one 🙂↕️
Can this do fobik Keyless Go matching/syncing after you programmed the key. On the Autel you have to do that after you program the fobik
Yes you can I done it before
Can it change PCM VIN number like swapping used PCM to the dodge charger
@@Yomender7126 I haven't tried that
I tried it on my 2018 and it wasn’t working do it only work for 2017 and down?
2018 and up you have to connect the star link access cable it's super easy and the cable is like $50 on Amazon helps you for other Chrysler jeep and dodge models too
@@compadetjyou teach me this if I pay you?
Thanks for the video. Do you know if this unit will program the key fob on a 2022 Ram 1500 new style?
Not this model it won't
@@compadetj Do you know which one would?
@AnthonyCalderon-rk5tl yea if you don't want to spend too much money get the basic autopropad it works great they have another autopropad g2 with more features but if you just need it for Dodge newer models the basic works fine
@@compadetjwe an autel km100 work for dodge ?
@user-vf3gh8up5q I haven't tried that model I have it I will test it tomorrow with a jeep compass and I'll post a video
Hello I’m new to locksmith I’m trying to learn more about key programming. Is it possible I can dm you?
Yea
Is the brute force cable the $30 red cable?
www.amazon.com/gp/aw/d/B0B4D76NWB?psc=1&ref=ppx_pop_mob_b_asin_title
Here is the link for the cable I use, it's super easy to use just for the xpad 100 plus you have to connect to the OBD port as well when you use the brute force cable to get the pin from the starlink connector in dodge jeep or Chrysler
@@compadetj what year did Chrysler start using the starlink connector
@@brianarias4082 2018 and up
Isn’t autel km100 better and easier to use
What about for jeep what years does it go up too for key programming
This model gives me to 2023 so far on the display will say 2018- that means 2018 and up all you have to do is make sure you update the Tablet via internet
How do I get 2018-2023 update I have the same one
@marcoselcompadetjlopez
@Throwdes762s just connect to the wifi and you have the update tab on the home page make sure you update all that mine gives me that tab 2018-
@Throwdes762s did you used the brute force cable or the ADC2011?
Thought u need the 12+8 cable?
Not until the 2018 model but for the ram you do
How did you figure e which fcc id to use on remote?
Just with time and experience specially with Toyota they have the special remote like the corolla LE and also with using the xtool VVDI app
Where’d you get the key fob I ordered one from Amazon and a local lock smith is going to come down and try to program it. Will it work?
Yea the ones from Amazon or ebay work too ebay has them for a cheaper price just check the seller ratings
Is the Ancel x6 a good one does it program push to start ?
I haven't used the Ancel x6
The 3 models I use it's the Autel km100 Autopropad basic and Xtool plus 100
@@compadetj appreciate you responding baxk
Will the tbd084 gateway cord work for xtool
@@Trefatal it should all you need is the cable to be able to connect to the port access point same as the brute force cable
@@compadetj ok can i use the xtool d7
@Trefatal for some models it will work for 2018+ models the D7 won't work I suggest get the propad basic if you don't want to spend too much money and does the same job as the fancier G3 if all you need is key programming I have the propad basic I use it for Dodge Jeep and Chrysler 2018 + and the bruteforce cable and works perfect to get the pin code
Will a Xtool D7 work for scats and hellcats?
@Trefatal this model works for up to 2017 model for newer you need the auto propad
Will 2024 version xtool x100 will work?
@Trefatal no they don't have the system that you need for Dodge I tried and only the Auto propad is the one that gives me access to read the pin and program
what all cords are you using?
Only the obd cable for this charger
For newer models you need the brute force or the Propad
Does it turn the car on?
Ir will let you some cars but it won't drive
Nice video can you turn on your car with this scanner
Yes for some models you can start the engine
Can you show us where to plug it up at inside the car
It's just the OBD 2 port for this year models for newer ones you need the Star connector to be able to get the pin code the OBD 2 port is located right under the dashboard super easy to find
What years do you need the star connector?
@@antoniotucker1225 2018 +
Does the xtool work for 2018+ charger or only to 2017?
Works for 2018 as well all you need for those years is the brute force cable or the ADC2011 cable to get the pin code no need to connect to the OBD2 PORT
Do I need to connect the brute force cable if I’m using the ADC cable for programming?
@@PopoutTG no either one or the other
Last question thank you alot. If I have a charger that is 2020 do I just click 2011-2017? I have the exact same key program tablet btw
@@PopoutTG no it should give you 2018- option if it doesn't update the tablet via wifi
por qué cuando trato de programar la llave de 2015 Dodge Challenger dice, “failed to communicate”tambien tengo wifi 0:43
Revisa la connection y si no funciona usa el cable brute force
where do I get the cable? @@compadetj
Mine does not read PIN codes but I have the same exact tablet why is that?
You bought the wrong one
@@omb_reese8760 can i still use xtool x100 padplus to do dodge programming?
@@bloodseville1886 if you get the PIN codes yeah but you need your car manual for tnem
@@omb_reese8760 what do i need the car manual for? i can pull code on the x100 padplus
Some dodge cars you need the brute force cable for example the 2016 ram or cherokee does requiere the brute force cable to get the pin code
Where you get the key fob link plz?
This fob you can get them at Amazon or ebay they are super cheap there and for this year model charger is super easy to program them with the xpad 100
Work on F150 2023?
Can you use autel universal keys with chargers?
Yes I posted a video on how to make a universal key with vvdi key tool
Does it turn on the car?
@Grindseasonx some models the car will turn on but you won't be able to drive it