While there may not be a specific Dualtron factory in the UK for installations, we do offer a convenient collect and drop-off service to assist you with the installation process. Here's how it works: First, you would need to place an order for the required parts and receive the package at your home. Once you have the package, we can arrange a collection of your scooter along with the package. We will then proceed with the installation in a separate step. To initiate this process, you can use our Booker repair button on our website, and we will guide you through the necessary steps from there. This way, you can take advantage of our services and ensure a hassle-free installation for your Dualtron scooter.
Hello, I have a question, I have an achellius and I wanted to put display EY4. If I disconnect the current EY3, will I have the same connections for the EY4 display or do I have to make some electronic modification? thank you so much greetings from Argentina
Yes, the wiring process for the Ultra 2 should be similar. You will need to connect the six-pin connector to the controller and establish a connection between the smart display and the throttle. It's important to note that when initially testing the setup, it's advisable to refrain from connecting any additional power supply for lights. Ensure that everything is working correctly, and then you can tap into one of the LED lights from the scooter for the power supply to the throttle trigger. As long as you follow these steps, the EY4 system should work fine with the Ultra 2.
Actually, the process for the X2 is quite similar to what is shown in the video. However, there are some additional components and steps involved that are specific to the X2 model. Although we don't have a video specifically for the X2 installation, we are here to support you every step of the way. After you place your order on our website, we can provide live assistance through WhatsApp video to guide you through the installation process. Additionally, we will supply you with a comprehensive written guide with pictures via email and include detailed instructions inside the package. Rest assured, we are committed to ensuring a smooth and successful installation for your Dualtron X2.
That's a great approach! Reaching out directly to your seller and inquiring about the experiences of other customers is a wise step to take. They would have valuable insights and knowledge regarding the specific modifications or compatibility you are considering. It's always helpful to gather information from reliable sources, such as the seller, to ensure you make informed decisions about the compatibility and modifications of your scooter.
To change the lights, you need the new controller. Installing or retrofitting the throttle on models without the standard EY4 doesn't enable light adjustments via the app.
@@MinimotorsUnitedKingdom and what is that blue clip for does that do something cause it's looping two wires and that clip never came with my order from dualtron that I ordered
@@user-re2kk5eh8r I couldn't find any documentation on the clip. There is however more contact information for the product designs team on the manufacturer's website at dual-tron.com
I’m on hour 7 now. The process where he organizes the wires on the bottom next to the dualtron LEDs is critical. I’m the video he did it in a few minutes. This has been such a terrible headache for me and I’ve given up because I cannot tuck the wires in tight enough to screw it down
@@MinimotorsUnitedKingdom i ended up screwing it down with hours of dedication but youre totally right! you have a ton of experience. I have a question. I want to use an alternative controller for this scooter. I want to get 2 sinewave controllers but don't know of anyone doing this. You think it would be possible?
So your responding to the wrong video Smfh nobody cares what you like smh!!! This video if you can read is for the eye4 display for all dualtron! Where you get thumb from that description??????
We understand that everyone has their own preferences when it comes to scooter controls. While this video specifically focuses on the EY4 display for Dualtron scooters, we can certainly explore options for thumb-controlled accelerators if that is your preference. There are aftermarket thumb throttles available that can be compatible with Dualtron scooters, providing you with the control style you prefer. Feel free to let us know if you'd like more information on thumb-controlled options.
We appreciate your input and understanding regarding the situation. It's important to maintain a respectful and helpful atmosphere in the comments section. If you feel that there has been a misunderstanding, we encourage you to politely clarify the topic or offer additional information to assist other users. Remember, fostering a positive community is beneficial for everyone involved. If you have any further questions or concerns, please feel free to ask.
It's a bit complicated. Why isn't this done already. Forgot about the Thumb Throttle. Forget that. How can you expect people to do this. What a Joke. You need a Degree in Motor Mechanics.
@@MinimotorsUnitedKingdom i agree keep up the good work man loving the new ey4 display and new throttle as currently have it on my dualtron mini now cheers for the beautiful upgrade :)
You forgot it only works ’as intended’ on 2-3 of the newest models, the rest is just for Minimotors to experiment on. After a year, the app, bluetooth and range function is yet to work. For now, it’s just glorified plastic with a shitty display quality. 👎
I understand your concerns, but there are a few points worth mentioning: 1. While it may work better on newer models, many users have successfully installed it on their Dualtron scooters. 2. The Bluetooth function does work and allows you to access scooter settings and set up a security code for added protection. 3. Connecting lights is a feature limited to certain newer controllers found in specific models, and it's not available on all scooters. 4. The app has other valuable functions, like registering your scooter with the manufacturer and accessing after-sales support tailored to your scooter's model and serial number. This has greatly improved the user experience and streamlined the parts procurement process. Ultimately, the app's functionality can vary depending on the scooter model, but it offers valuable features for many users.
Заказал себе такой,буду ставить
Спасибо! Обязательно сообщите нам, когда вы его установите, и пожалуйста, поделитесь видео.
a bit more explanation needs, more small details on how to change cables
We can offer full instructions on installation for everyone who purchases.
@@MinimotorsUnitedKingdom My on the way waiting for delivery :)
Same here i have a dualtron eagle pro and i need details for how to change cables and the rest i can solve it :)
Is there a Dualtron Factory in the UK that would be willing to do this for a charge? I CBA
While there may not be a specific Dualtron factory in the UK for installations, we do offer a convenient collect and drop-off service to assist you with the installation process. Here's how it works: First, you would need to place an order for the required parts and receive the package at your home. Once you have the package, we can arrange a collection of your scooter along with the package. We will then proceed with the installation in a separate step. To initiate this process, you can use our Booker repair button on our website, and we will guide you through the necessary steps from there. This way, you can take advantage of our services and ensure a hassle-free installation for your Dualtron scooter.
how i can change P17? i have dualtron victor 60v...
Taking the grip off is proving a little tricker than it looked.
😂 sometimes I leave out some of the most frustrating parts just for fun.
Although it's easy to look up : "how to remove a grip from a handlebar"
Es cierto mpatible con el dualtron city?
Hello, I have a question, I have an achellius and I wanted to put display EY4.
If I disconnect the current EY3, will I have the same connections for the EY4 display or do I have to make some electronic modification?
thank you so much
greetings from Argentina
Hi the current EY3 is not compatible with the EY4 SMART DISPLAY.
You need the EY4 Throttle : dualtron.uk/products/ey4-display-throttle-dualtron-ultra-2-upgrade-year-2024
Hello. Can the fingerprint sensor be connected to the EYE4?
EY4 is not compatible with the Minimotors fingerprint sensor.
Hello, I installed an ey-4 display on my thunder 2 model engine, but it does not show the range. How can I solve this problem? thanks.
bende merak ediyorum
Do you wire it up like this with the ultra 2 as well?
Yes, the wiring process for the Ultra 2 should be similar. You will need to connect the six-pin connector to the controller and establish a connection between the smart display and the throttle. It's important to note that when initially testing the setup, it's advisable to refrain from connecting any additional power supply for lights. Ensure that everything is working correctly, and then you can tap into one of the LED lights from the scooter for the power supply to the throttle trigger. As long as you follow these steps, the EY4 system should work fine with the Ultra 2.
hi, won't there be a video like this on X2 as well?👍
Actually, the process for the X2 is quite similar to what is shown in the video. However, there are some additional components and steps involved that are specific to the X2 model. Although we don't have a video specifically for the X2 installation, we are here to support you every step of the way. After you place your order on our website, we can provide live assistance through WhatsApp video to guide you through the installation process. Additionally, we will supply you with a comprehensive written guide with pictures via email and include detailed instructions inside the package. Rest assured, we are committed to ensuring a smooth and successful installation for your Dualtron X2.
Is this compatible with the Bluetran Lightning?
That's a great approach! Reaching out directly to your seller and inquiring about the experiences of other customers is a wise step to take. They would have valuable insights and knowledge regarding the specific modifications or compatibility you are considering. It's always helpful to gather information from reliable sources, such as the seller, to ensure you make informed decisions about the compatibility and modifications of your scooter.
Quixk question if i dont have that blue clip will that stop.me from changing my lights though the app ?
To change the lights, you need the new controller. Installing or retrofitting the throttle on models without the standard EY4 doesn't enable light adjustments via the app.
@@MinimotorsUnitedKingdom so dualtron thunder 2 40ah 10000w version won't work ?
@@MinimotorsUnitedKingdom and what is that blue clip for does that do something cause it's looping two wires and that clip never came with my order from dualtron that I ordered
@@user-re2kk5eh8r I couldn't find any documentation on the clip. There is however more contact information for the product designs team on the manufacturer's website at dual-tron.com
I’m on hour 7 now. The process where he organizes the wires on the bottom next to the dualtron LEDs is critical. I’m the video he did it in a few minutes. This has been such a terrible headache for me and I’ve given up because I cannot tuck the wires in tight enough to screw it down
5 years, 8h/day, 12,775 hours and you'll feel more confident fixing Dualtron. I can assist by video on WhatsApp | +447857969608
@@MinimotorsUnitedKingdom i ended up screwing it down with hours of dedication but youre totally right! you have a ton of experience. I have a question. I want to use an alternative controller for this scooter. I want to get 2 sinewave controllers but don't know of anyone doing this. You think it would be possible?
@@cohegaming8069 I try to keep the controllers standard.
Could you show the same for the first dualtron thunder pleaseeeee!!. Also is the fingerprint scanner compatible with this model?
#Dualtron fingerprint will not work with #ey4 throttle
I don't like the accelerator with my finger, I prefer to use my thumb.
So your responding to the wrong video Smfh nobody cares what you like smh!!! This video if you can read is for the eye4 display for all dualtron! Where you get thumb from that description??????
We understand that everyone has their own preferences when it comes to scooter controls. While this video specifically focuses on the EY4 display for Dualtron scooters, we can certainly explore options for thumb-controlled accelerators if that is your preference. There are aftermarket thumb throttles available that can be compatible with Dualtron scooters, providing you with the control style you prefer. Feel free to let us know if you'd like more information on thumb-controlled options.
We appreciate your input and understanding regarding the situation. It's important to maintain a respectful and helpful atmosphere in the comments section. If you feel that there has been a misunderstanding, we encourage you to politely clarify the topic or offer additional information to assist other users. Remember, fostering a positive community is beneficial for everyone involved. If you have any further questions or concerns, please feel free to ask.
wtf i cant change p17 for 60V?!
We've only had customers buy for Storm, Storm Limited, Thunder 2, X2-UP, X2
It's a bit complicated. Why isn't this done already. Forgot about the Thumb Throttle. Forget that. How can you expect people to do this. What a Joke. You need a Degree in Motor Mechanics.
It's not more complicated than other operations, just different.
@@MinimotorsUnitedKingdom i agree keep up the good work man loving the new ey4 display and new throttle as currently have it on my dualtron mini now cheers for the beautiful upgrade :)
it is not brain surgery.... If you could learn the basics of the stuff you use this would be nothing... ;)
You forgot it only works ’as intended’ on 2-3 of the newest models, the rest is just for Minimotors to experiment on. After a year, the app, bluetooth and range function is yet to work.
For now, it’s just glorified plastic with a shitty display quality. 👎
I understand your concerns, but there are a few points worth mentioning:
1. While it may work better on newer models, many users have successfully installed it on their Dualtron scooters.
2. The Bluetooth function does work and allows you to access scooter settings and set up a security code for added protection.
3. Connecting lights is a feature limited to certain newer controllers found in specific models, and it's not available on all scooters.
4. The app has other valuable functions, like registering your scooter with the manufacturer and accessing after-sales support tailored to your scooter's model and serial number. This has greatly improved the user experience and streamlined the parts procurement process.
Ultimately, the app's functionality can vary depending on the scooter model, but it offers valuable features for many users.
the ey3 is good enough and also more practical, this is overpriced upgrade just for no reason