How to change gear oil in Honda Fit/Jazz | Manual Transmission Fluid Change

Changing manual transmission / transaxle / gearbox oil in a Honda Fit.
tape measure: www.lowes.com/pd/CRAFTSMAN-PR...
ratcheting wrenches: www.lowes.com/pd/Kobalt-8-Pie...
Fluid transer pump: www.walmart.com/ip/Pennzoil-F...
0:00 Intro
1:00 How I got it on ramps
3:14 Will a 2x8 hold up the car?
5:20 The drain and fill bolts
6:03 Removing the plastic shield
7:08 Loosening the fill and drain bolts
9:40 Draining the gear oil
11:01 Honda manual transmission fluid
11:13 Fluid pump (bought at Walmart)
13:22 Pumping in the fluid
16:24 old fluid vs new fluid
18:08 Test drive
19:49 Checking for leaks
Music:
Nilly Willy by Yung Logos (ramp timelapse)
8th Wonder by RKVC (outro)
Disclaimer:
If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. The creator of this content does not take any responsibility for any action taken as a result of the information or advice on this CZcams channel (or other platforms) and shall not have any liability in respect of any injury or damage that may result.

[@idalinofranco1121]

I fully agree with your comment on the crush washer....I also have never changed any washer in my life...and never had any problems thereafter :-O

[@giovannipomarico2035]

*Spent 15$ finding the proper washer for the gearbox filling plug*
😭😭😭

[@EZ-D-FIANT]

That sump plug washer is the reusable type, you can tell by the thickness and the fact the reusable ones don't really come off easily, I reckon this dude has been lucky each time cos a proper crush washer will definitely leak if not replaced, he didn't know a trim bolt with a screw head on it needed screwing out tho so it doesn't suprise me he has gaps, fit a new washer when it needs it a box of different sizes is a few quid it's no drama.....

[@navaneethakrishnans1299]

Very useful sir. Your surroundings are awesome.

[@YoureNowOnTV]

Thanks for making this video and sharing it with us. 😀👍

[@capnbly]

That drain oil looked pretty clean. If you don't know how old it is, better to change it.

[@Plaguer_agent]

Very informative video thank you

[@jomangeee9180]

previously i could not locate the nuts , i found this the most accurate, topographically

[@EZ-D-FIANT]

Anyone in the UK don't buy one of those pumps, unfortunately we use a different thread system in the UK, best bet here is either a extended bendy long neck filler funnel or a squeeze bottle with some sort of line attached!.....👍👌👍

[@FamilyFriendlyDIY]

Thanks for the input!

[@hondaaccord1971]

Awesome thanks great video gonna do mine like this very soon

[@FamilyFriendlyDIY]

Thanks for watching, Kevin!

[@dws2313]

Well, Dave, your "shadetree" mechanics look a lot like mine. But, you got the job done and the Lord gave and forgave, and blessed and kept you.

[@FamilyFriendlyDIY]

Amen!

[@RezboaDog]

Thank you so much for creating this guide! I followed your instructions step-by-step, and now my manual Fit shifts so smoothly. You've saved me so much time and frustration. Keep up the great work!

[@FamilyFriendlyDIY]

Thanks for the kind comment!

[@cgcgcg69]

thank you !!

[@FamilyFriendlyDIY]

Thank YOU for watching!

[@TheJackMarcin]

would you say there was any improvement in the shifting/ trans response after the oil change?

[@FamilyFriendlyDIY]

Good question, Jack. I didn't notice any difference. Seems to shift the same to me.

[@cbrhurrican]

Please anyone can help what type oil nneds for an ishift model 2010 Honda Jazz

[@AleksandarStefanovic]

I think that MTF-3 (Manual Transmission Oil) should be used. In case MTF-3 specifically is not available, you can use any oil that is specific for manual transmissions. If that is not available, the owner's manual says that you can use 10W-30 or 10W-40 oil.

[@danialrafiqi9346]

hey dave. is your fit shudders when on first gear especially when accelerating?

[@FamilyFriendlyDIY]

Yes it does a little, Danial.

[@jamesgann560]

That's trans mount/engine mount. Mine does that. It's getting worse now that I'm at 255k miles.

[@danialrafiqi9346]

@Jay Yoyo No

[@richardmorrison2686]

The wood should remain flat on the surface , use 2 to 3 to make a ramp of wood up to the metal ramp , there should be no daylight under the wood

[@musicagabu4731]

Wich model of honda ? Y have 1.2 ivtec 2008? Is the same ???

[@FamilyFriendlyDIY]

This is the 2010 1.5 vtec.

[@dannivar2202]

Precisamente ayer cambié el eceite de mi transmisión manual de honda fit 2007 y el eceite estaba color cocacola 😅

[@FamilyFriendlyDIY]

😮

[@angelfilomeno833]

How much liter do you put inside?

[@FamilyFriendlyDIY]

Depends on year, but about 3.2 pints.

[@williamshelton9688]

Should the vehicle not be level ?

[@FamilyFriendlyDIY]

As level as possible.

[@justinpoole7750]

Should of jacked it up and then put the ramps underneath of the wheels my man.

[@FamilyFriendlyDIY]

Thanks for the suggestion!

[@tonythai5991]

This is very dangerous since the ramps could slide.

[@williamshelton9688]

Why is your hat on backwards…a aerodynamic thing ?

[@FamilyFriendlyDIY]

To keep my bald head from glaring at the camera, and yet still allow me to see upward.