You need: 1. Propellers curved to provide upthrust and lift. 2. Distance between propellers and flat ground needs to be increased. 3. Guard the propellers from creating harm to you or anyone. 4. Weight distribution.
He need full armor not only helmet see those blades if fall off and touch the blade it's all over no safety on blades he should fully cover those blades
No good solution design here. I would power the quadcopter with 4 independent electric motors controlled with a Naze32 type flight controller (Betaflight firmware or similar) and with a buffering battery and use the motorbike strictly for electricity generation to keep the battery at a SoC between 30% and 80%. Further I recommend to put the Quadcopter component ABOVE the driver and not below it, to make it more safe.
@@rudigergmach7051 you'd probably get away with two 48V 165farad modules. No issues with constant charging and discharging and enough to land if something goes wrong and you are too low to deploy a chute. Supercapacitors can give you as much as 7000watts per kilo. The tech has come a long way and another thing. Why would a capacitor weigh more than a battery of the same form factor? As a buffer array it is the waaaay better solution towards safety and longevity. You have the ICE for charging it anyway. It can charge and discharge millions of times without any issues. What do you think the "battery" in an f1-car actually is?
Ok so the engine sounds maxed, but i think it needs a torque converter style automatic clutch with better gearing. The catch screen needs to cover all blades, or be built as a mancage, the safety gear needs to be a double stitched layer of leather, A6 cut resistant fabric, and impact armor. Lighten the load on the landing just use gear just use 1/2" round or square tube three point attachments. Looks fun though.
Feedback: Create a drone to place a bike and transport it to highway from home or across a mountain or a river or another location. This will save time for biker. He can ride from there and drone can come back home
Lol everyone talking bout it being a human blender meanwhile my first thought was if that engine suddenly quits because it's being absolutely maxed out and isn't designed to be at max rpm for very long it's just gonna drop like a rock out the sky plus how hard it is to control since they all spin at the same speed instead of having individual control so he has to use his body weight to control a probly 1200 lbs unwieldy monster
Перетяжелил конструкцию-это раз! Во-вторых, пропеллеры надо было выше поднять, чтобы поток воздуха на взлёте и посадке мог подсосать дополнительную "подушку" и общая устойчивость в полёте тоже улучшится. С шагом воздушных винтов тоже поэкспериментировать не мешало бы, по-моему шаг можно было бы увеличить?! В третьих, для лучшей аэродинамики пропеллеров их надо заключить в кольца( это повысит и безопасность тоже). Но, главное, "похудеть" во всём( и самому пилоту тоже😊) и убрать всё лишнее, чтобы хотя бы на метр высоты взлететь, а не "чуть-чуть подпрыгивать"!
@@abuahmed3054 Уважаемый, сами пропеллеры достаточно хорошо отбалансированы и при вращении играют роль маховиков гироскопов. Так что, как минимум, 4 гироскопа уже имеется!😉 Да и в автопилотах( миниатюрный автопилот здесь тоже не помешал бы, т.к. слишком велика вероятность вручную сильно "раскачать по крену и тангажу" этот летательный аппарат, со всеми вытекающими печальными последствиями) уже давно применяют лазерные гироскопы, разве не так?!
@@user-vr5do7dj2d Где в этой "жужжалке" аж 4 двигателя по 100 л.с.???😂 Там вижу мотоциклетный движок, хорошо если он 40 л.с индикаторной мощности выдаёт, а с потерями ременных( а какие там могут быть ещё, цепные стальные, что ли?😊) передач к пропеллерам там вообще с мощность завал! С себя всё тряпьё надо было "лётчику" скинуть, оставить лишь лёгкий комбез и каску! Конструкци аппарата переделать по-авиационному ажурно на пределе запаса прочности-"летучей" сделать, а не такую "паровозную" раму мостить и колёса от магазинских тележек по килограмма полтора каждая! Углеродно-графитовых композитов нет там, разве что, пропеллеры из них сделаны?! Но это и хорошо, что не взлетел! Он бы разбился сразу, с такими-то очевидными проблемами устойчивости аппарата по-крену и по-тангажу!😂
For 1 it looks WAY to heavy for the motors your using.🤔 you should have built it around a go-kart frame and use as much carbon fiber as possible to make it strong but light
He should definitely find a way to keep the blades from chopping off someone’s head or something and make like a cage to fit over them ! But it’s definitely a good idea and I don’t look that expensive!! Congratulations on your first attempt!!
I saw one of these. I think it was in China and they were actually flying around on it. It wasn't like trying to take off. It was actually doing quite well as a flying machine
There is the mesh metal floor to protect him if he ever falls … The biggest issue it’s all constructed with steel and that made it so difficult to lift … either make it lighter or somehow increase the power :) … also it needs to be balanced :) might as well start from scratch :)
This guy has been doing the 'fixed-pitch propelers strapped to the motorcycle machine' game for years. Progress is slow but hes living his dream so good on u dude
As hélice deveria ser envolvida em um tubo para direcionar o ar com hélice invertida para estabilidade, a regulagem de vôo seria janelas que fecham a entrada do ar, deveria ser inclinado as hélice ou seja o motor para ter maior estabilidade, colocar um pêndulo ou peso como nos navios para estabilidade, se vocês colocar um pêndulo central vocês pode colocar os motores em linha 2 atrás e dois na frente com rotação opostas para estabilidade veja todo pássaro tem barriga e peito para estabilidade a moto seria o pássaro a tendência é virar abraço
Benefit = 0%
Danger = 1000% ⚠️
😂
Stupidity in action 😂
Wife can cheat on him.😮😮
เก่งแต่ต้องปรับปรุงการบังคับให้มีความปลอดภัยครับ
Он в бронике .
He'll be mincemeat if he ever falls off ☠️
Tattar
Was literally thinking the same thing.. Bro I pray they make some safety features asap!!!
There is a metal net above the fans though
@@scaletta5847
That's to control the size of mince.
@@scaletta5847 A net to make the square slices what do you mean.. It barely was keeping it safe.. Are we watching the same video.. lol..
You need:
1. Propellers curved to provide upthrust and lift.
2. Distance between propellers and flat ground needs to be increased.
3. Guard the propellers from creating harm to you or anyone.
4. Weight distribution.
Such a positive comment. I love it
Yes sir!
But the dude wasn't trying to fly.
Be careful, bro, if you fall you could be hit by a propeller
Wovvv.....right guarding the propellers is nice comment...
A lot of homemade helicopter liveleak footage has taught me that building your own flying machine is the best way to end up in pieces on your own lawn
There is no way I’d ride a human blender.
😅
It worse than that it’s 4 human blenders and your surrounded by them 😂
1st thing I said. Agree 💯 %
Nice 😂
@@Zig423😂😂😂😂😂 - sorounded by human blenders
What do you ride ???
A chopper.
🛬🛬🛬🛬🛬
Get in to the chopper Arnold
Literally
monta geringoptero
Nice😂
Needs to eliminate at least 200 lb of metal. Maybe he could take off 15 ft off the ground😊
Sir your fuel is now over 😂
I'm glad he is wearing a helmet in case it might go wrong.
Yeah.....he will only have a head of he falls
Ever heard of bottoms up approach. Yeah right, that’s only when you have beer with friends 😂
Yeah.. no need for gloves in this instance
pois é, se der errado, sobra o capacete.
He need full armor not only helmet see those blades if fall off and touch the blade it's all over no safety on blades he should fully cover those blades
What doesn't kill you does not always make you stronger.
Sometimes it makes you ribbons of spaghetti.
@@user-lv7qn4gw3gwhat kills you make you ribbon spaghetti.. but what doesn't makes you stronger.
Puts a new meaning to a close shave. 😂😂😂
No good solution design here. I would power the quadcopter with 4 independent electric motors controlled with a Naze32 type flight controller (Betaflight firmware or similar) and with a buffering battery and use the motorbike strictly for electricity generation to keep the battery at a SoC between 30% and 80%.
Further I recommend to put the Quadcopter component ABOVE the driver and not below it, to make it more safe.
I would look at using supercapacitors instead of a battery. Saves even more weight
Supercapacitors are much heavier than Li-NMC or LFP batteries.
@@rudigergmach7051 you'd probably get away with two 48V 165farad modules. No issues with constant charging and discharging and enough to land if something goes wrong and you are too low to deploy a chute. Supercapacitors can give you as much as 7000watts per kilo. The tech has come a long way and another thing.
Why would a capacitor weigh more than a battery of the same form factor? As a buffer array it is the waaaay better solution towards safety and longevity. You have the ICE for charging it anyway. It can charge and discharge millions of times without any issues. What do you think the "battery" in an f1-car actually is?
Extremely Dangerous Product💀☠️
Reminds me of those old school videos of the first plane makers.... Looks dangerous af
Just the ingenuity is amazing. 🤩
• Step 1: Figure out how to assemble
• Step 2: Figure out how to fly
• Step 3: Flight ✈️ test
• Step 4: Think of a way to get down
• Step 5: --💀--
Next up, world's first human smoothie made with real meat
Don't worry he's working on a safety net for next one 😂
McDonald’s already uses human meat fillers in their burgers. It’s in a smoothly form before they add it the hamburger and sausage meat.
Ok so the engine sounds maxed, but i think it needs a torque converter style automatic clutch with better gearing. The catch screen needs to cover all blades, or be built as a mancage, the safety gear needs to be a double stitched layer of leather, A6 cut resistant fabric, and impact armor.
Lighten the load on the landing just use gear just use 1/2" round or square tube three point attachments.
Looks fun though.
He'll be menced meat in no time!!!😮
Machine is like I still love to see you in one piece, so I won't fly 😂
Feedback:
Create a drone to place a bike and transport it to highway from home or across a mountain or a river or another location. This will save time for biker. He can ride from there and drone can come back home
Lol everyone talking bout it being a human blender meanwhile my first thought was if that engine suddenly quits because it's being absolutely maxed out and isn't designed to be at max rpm for very long it's just gonna drop like a rock out the sky plus how hard it is to control since they all spin at the same speed instead of having individual control so he has to use his body weight to control a probly 1200 lbs unwieldy monster
😂😂😂😂😂😂😂😂😂
เล่นอะไร
It's never going to get off the ground. To heavy and everything is wrong. Maybe if he upgraded to a jet engine. Be easier to get a helicopter.
And with a whirlpool throttle it's not a good combo.
Only computer control system can manage that geometry
It will be a Horrific Death if you fall in one of those "Helicopter Blades".
A literal “chopper” 💀
Add an automatic balancing system. It'll increase the speed on one blade if its falling bellow the others.
Перетяжелил конструкцию-это раз!
Во-вторых, пропеллеры надо было выше поднять, чтобы поток воздуха на взлёте и посадке мог подсосать дополнительную "подушку" и общая устойчивость в полёте тоже улучшится. С шагом воздушных винтов тоже поэкспериментировать не мешало бы, по-моему шаг можно было бы увеличить?!
В третьих, для лучшей аэродинамики пропеллеров их надо заключить в кольца( это повысит и безопасность тоже).
Но, главное, "похудеть" во всём( и самому пилоту тоже😊) и убрать всё лишнее, чтобы хотя бы на метр высоты взлететь, а не "чуть-чуть подпрыгивать"!
آپ گیرو کا استعمال کرتے تو اچھا تھا اس سے بیلنس کرنے میں کافی صحولت مل سکتی ہے
@@abuahmed3054
Уважаемый, сами пропеллеры достаточно хорошо отбалансированы и при вращении играют роль маховиков гироскопов. Так что, как минимум, 4 гироскопа уже имеется!😉
Да и в автопилотах( миниатюрный автопилот здесь тоже не помешал бы, т.к. слишком велика вероятность вручную сильно "раскачать по крену и тангажу" этот летательный аппарат, со всеми вытекающими печальными последствиями) уже давно применяют лазерные гироскопы, разве не так?!
You need a flight controller to manage the propeller speeds or you won't be able to stabilize it no way in hell
วัสดุที่ใช้ทำโครงสร้าง 1กราไฟว์
2คาบอรน์
3อลูปิเนียม
4เครื่องยนต์ 100hp
@@user-vr5do7dj2d
Где в этой "жужжалке" аж 4 двигателя по 100 л.с.???😂
Там вижу мотоциклетный движок, хорошо если он 40 л.с индикаторной мощности выдаёт, а с потерями ременных( а какие там могут быть ещё, цепные стальные, что ли?😊) передач к пропеллерам там вообще с мощность завал!
С себя всё тряпьё надо было "лётчику" скинуть, оставить лишь лёгкий комбез и каску!
Конструкци аппарата переделать по-авиационному ажурно на пределе запаса прочности-"летучей" сделать, а не такую "паровозную" раму мостить и колёса от магазинских тележек по килограмма полтора каждая!
Углеродно-графитовых композитов нет там, разве что, пропеллеры из них сделаны?!
Но это и хорошо, что не взлетел! Он бы разбился сразу, с такими-то очевидными проблемами устойчивости аппарата по-крену и по-тангажу!😂
For 1 it looks WAY to heavy for the motors your using.🤔 you should have built it around a go-kart frame and use as much carbon fiber as possible to make it strong but light
Даже эти колеса от телеги имеют вес килограмм
@strelok6186 I know they look like shopping cart wheels 😅 to much weight
INCREASE THE GEAR RATIO TO THE BLADES AND USE ALUMINUM BILLET TUBING TO LIGHTEN THE WEIGHT
if the propeller is on top of the engine then the force of gravity will make it balance
He took us back 100years....dude, we are in the jet age
Don't give him any ideas.
Helicop jump jump jump 😅😂
Oh yeah, THAT looks safe 😂 wtf 😂
He should definitely find a way to keep the blades from chopping off someone’s head or something and make like a cage to fit over them ! But it’s definitely a good idea and I don’t look that expensive!! Congratulations on your first attempt!!
I saw one of these. I think it was in China and they were actually flying around on it. It wasn't like trying to take off. It was actually doing quite well as a flying machine
Make the frame lighter, a guard over the fans for safety an try again my man!
That ain't no Honda
Nope it's a Yamaha
👍
yeah, go ahead and shut it down, ain’t no flight happening today 🫣
There is the mesh metal floor to protect him if he ever falls …
The biggest issue it’s all constructed with steel and that made it so difficult to lift … either make it lighter or somehow increase the power :) … also it needs to be balanced :) might as well start from scratch :)
Electronic clutches for the fan blades connected to a gyro would probably make that alot more stable and alot more functional
Absolutely true he need reduce weight and make a system to control fans speed to be stable
This baby gets 52 gallons per inch... and it cleans the driveway! I'm 💚!
This guy's like Billy. Bob out there trying to build a drone
His riding a blender machine😂🎉
Hahahah .....you such a Cannibal 😂
Taking the lawnmower to a whole new level 😅
Probably safer than it’s original use
This guy has been doing the 'fixed-pitch propelers strapped to the motorcycle machine' game for years. Progress is slow but hes living his dream so good on u dude
Suicide machine.
😂😅😂😅
💯
VERY DANGEROUS IF THE PILOT FALLS ON THE BLADES .😢
Screen door on a submarine : this guy's previous project
He can cover the blades, and install some funnel like structure below the blades, like rockets engines have.
Flying bike ❌ body chopper ✅
As hélice deveria ser envolvida em um tubo para direcionar o ar com hélice invertida para estabilidade, a regulagem de vôo seria janelas que fecham a entrada do ar, deveria ser inclinado as hélice ou seja o motor para ter maior estabilidade, colocar um pêndulo ou peso como nos navios para estabilidade, se vocês colocar um pêndulo central vocês pode colocar os motores em linha 2 atrás e dois na frente com rotação opostas para estabilidade veja todo pássaro tem barriga e peito para estabilidade a moto seria o pássaro a tendência é virar abraço
هل انت مهندس طيران اكيد
It cant be used single engine only, couse this concept need to activated gyroscope, he had to use split engine propeller each
It's so unbelievably ridiculous and dangerous. Love it
Confidence 💯
This is not Honda, this is Yamaha.
He has idea! He is an engineer. The exposed blades are dangerous though
*Tadin do motor, nem tá aguentando 😅*
Looks like theres no regulations around this project lol
Dude is every neighbors favorite
I prefer those jet packs that is installed on the arms. Less danger of getting sucked into them.
Beyond dangerous!! I cannot imagine this guy accidentally fall into the blades 😱
Bro said he gone make a flying bike since the rest of us are waiting and hoping for flying cars.
So take it apart and make everything aluminum and you'll be flying like Superman ✨👍✨
You guys should put a flight controller in that so you can stabilize better 😅
Honda❌
Yamaha✅
Too heavy.
Smaller propellors. More Power. closer to each other. Balanced.
Who else wished it would actually fly off into the sky 😂
Heli-chopper
Keep going man 😊. You'll make it fly
Its called chopper coz it chops humans who accidentally falls from the seat
If he falls in one of the propeller 💀💀💀
Waste of time and money 😂
The invention of the Oppressor
Other people : 😮 😮💨
GTA players : 😨😱
That does it. I'm adding this accessory to my Goldwing.
What lesson did we learn today?
Not everything is worth the money and time.
To jest nowoczesny pojazd do tłumienia zamieszek w muzułmańskich dzielnicach zachodniej europy.Wjeżdżasz w tłum i masz mięso na kebaba
When it’s start flying i would buy one, so don’t give up testing. ☝🏽
Seharusnya lantai,area pijakan kaki tertutup rapat ,biar udara/angin gak tembus ke atas sehingga tekanan udara mutlak JD tenaga dorong
Много раз пытались делать , практически неуправляемая конструкция , а в этом случае просто смертельный аттракцион .
Буквально сидит над четырьмя бензопилами.....
😂😂😂😂😂
How did you get your neighbours bedroom photo 😅?
That's one hell of a lawnmower
You seem like a talented guy I wish you would take that money and rebuild an old car that was made in America and keep it in your garage and enjoy it
I heard blades are safer if you color them black.
Japan tech is never regular. It's the best. Practical and functional
I feel like a sound proof full face helmet with a mic to someone watching you would complete that..
Using light metal such as aluminum or duralumin for the frame will work better.
الدوران لازم يكون ثابت ويكون في عتلة تتحكم بالمراوح لان هي المسؤلة عن الصعود والنزول والامام والخلف
Turn the exhaust upside down. It will become a VTOL jet😂
Finally it's not a Honda ...it's Yamaha ❤
That looks SO dangerous 😂 do not try this at home lol
Quando esse motor explodir, e suas hélices parar; você irá sentir suas forças indo embora!
This is a real chopper 😅
Try 100 percent and you will succeed, my best wishes
The bottom frame looks like metal manufacturing. Try poly carbon or fober glass.
At that point of stupidity, i wouldn't even bother wearing a helmet.😅
..xpectations vs reality..1)aerodynamics,,2)lightweght is a must,3)and safety measures specially w/dos propellers..keep going man...👊🙏🙏🙏
The helmet was 100% for camera and 0% for safety😂
He needs a 5.3 engine under the unit and 8 more fans.
He’s wearing a helmet mounted camera, should’ve added that footage here too
Hmm, would it be possible to make motorcycles more dangerous?
This guy: Here, hold my Everclear.
How would you like to die?
Him: YES 😁