MAX6675 with K-Type Thermocouple Control Relay as Thermostat to control relay with temperature
Vložit
- čas přidán 5. 08. 2024
- In this tutorial we learn how to use K-Type Thermonuclear with MAX6675 module to use it as Heater Control or Cooler Control by using a relay.
With the provided code, the project can be set to work as Cooler or Heater controller and the temperature value can be set in any unit C, F or K.
**** Free Course ***
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊 .
** Purchase this MAX6675 from **
Amazon USA: amzn.to/3ymrwfP
Amazon Canada: amzn.to/3AkmYbv
All other Amazon: amzn.to/3yh0AOl
Banggood (1 piece): www.banggood.com/custlink/3mK...
Banggood (5 pcs): www.banggood.com/custlink/KDD...
AliExpress: s.click.aliexpress.com/e/_9wXt8H
Jump to different section of video by clicking on the time:
00:00 Start
01:00 Introduction
04:07 Wiring Explained
06:39 Code Explained
11:08 Demonstration of heater control
13:18 Demonstration of cooler control
Download Arduino code for this video: robojax.com/L/?id=174
======================
Purchase this relay from Amazon: amzn.to/3kieR6b
Purchase MAX6675 from Amazon: amzn.to/35grxWP
Related videos:
Introduction to MAX6675 K-Type: • How to use MAX6675 the...
Using MAX6675 K-Type thermocouple whit LED display: • MAX6675 K-Thermocouple...
Using MAX6675 K-Type thermocouplewith LCD1602-I2C: • Using MAX6675 Thermoco...
Using 2 or more MAX6675 K-Type thermocouple: • Using 2 or more LCD160...
Using MAX6675 K-Type thermocouple as Heater or Coller controller: [this video]
Introduction to 5V relay: • Using 5V 1 channel rel...
Introduction to 5V relay(V2): • How to use 5V Relay wi...
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
If you want to learn Arduino from proven instructor on **Udemy**: bit.ly/rj-udemy
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
#robojax #robojaxMax6675 - Věda a technologie
very good job explaining Arduino and using sensors ! Thanks Time to dig out my Arduino
Awesome I can use this to build a battery bank or protection for pump system or fan control for my projects in confined spaces 👍
Perfect
Very good. I liked it.
Thank you! Cheers!
Great video
Glad you enjoyed it
Nice sir your supporter here..
Thank you very much.
i was follow your code for my inciniraoe circuit
its work thank you sir.
i was follow your code for my incirinator circuit .it's woks nice thankyou sir
You are welcome
@@robojax SIR HOW TO USE K TYPE THERMOCOUPLE WITH ATMEGA 328 P ?
WITHOUT MAX6675 MODULE
Ottimo lavoro stavo proprio aspettando un progetto del genere... se c'èra anche il display IC2 era ancora meglio.
Buono a sapersi che ti è piaciuto. Sì, lo farei sicuramente con LCD quando il tempo lo consente.
Thank you very much for a great video. I'm just doing this very similar for a fan air control to regulate temperature on my BBQ. your code is much prettier than mine. Lol
Im using a 16x2 screen for output which works fine. Now I'd love to like to add in a rotary encoder to be able to adjust the setting temperature without having to upload a sketch. I'm struggling with that part. Would you be able to point me in the right direction for direction on that?
You are welcome. I am pleased that you found it useful. I will make more tutorial and including LCD. this is not simple to explain it with just text. If time permits, I will make videos related to this.
How can I use Max6675 with PLC. Please tell me as I was using ada8495 but then lost it and now it's not available in my country and only Max6675 is available. Please reply.
Assalamualaikum sir , salam from indonesia country 🙏
Walaikum salaam, Stay safe.
explained in a very simple and detailed way. I am trying to map it on the Blynk. Apart from Blynk library, I added command in void setup section: Blynk.virtualWrite(V5, temperature); but no temperature value shows up in Blynk app. Am I putting some wrong parameter in virtualWrite command?
sorry I have no idea how you use it with other software. I don't like software or apps that don't offer free service.
can this be connected to Artisan Scope software to do PID control of coffee roasting? please.
you can read the temperature. so this outputs the reading value. it is free for you to use it whichever way you are pleased with.
Could you do one using the high side mosfet controlling a dc fan with pwm, using the Arduino and k type thermocouple?
This is interesting topic. if time permits, I will make tutorial on that. Thanks.
I followed your tutorial for max6675 and lcd display, thanks for the tutorial. I am going to try this tutorial also just have some doubts please do clarify these. First is can we use a 5v relay (no module). Secondly the fan used is ac or 12V dc fan can also be used. If possible please give the link for the fan.
Yes you can use relay if you drive it properly as shown in this video czcams.com/video/N-fFk51Eb8s/video.html for the fan, there are 1000s of options. Search on eBay or Amazon you will find something that will work for you
I am using my MAC for programming but always get the following error: No matching function caLL for MAX6675. What must I change to make it function? Thanks for a great video and for your help.
you have skipped the parts where I mentioned to install the library. Here is the same video with better details czcams.com/video/yJYXfaU9J34/video.html which is part of the course or watch introduction to MAX6675 czcams.com/video/A55QNx6kCoo/video.html. The video you are watch is not introduction.
Can I use this code to turn relay on/off for microwave oven power control?
relay is just a switch as I shown (if not watched, then watch again) and it will turn ON and OFF loads. Just respect the rating of current of the relay, then it will work for anything.
@@robojax thankyou
How long the maximum delay time?, I need at least 5minutes before it started.
it is up to you. inside setup() just add delay(5*60*1000); that is 5 minuets.
great tutorial sir..
i am from indonesia
if i set temperatur with push button, it"s work???? can you help me code sir?
Thanks, To be able to push temperature, it would be big project. I might do god willing
Whats the app name of programming part?
Here is my course which will teach you czcams.com/play/PLHvJ4bw0xno6THv-TQLf8lwVvY_23z75d.html
Or this 30 minutes introduction czcams.com/video/Mbb2xa1WcRM/video.html
uba wage ponnayek mn dakalama na yko.hena gahanawa.hena.mariyn.ub loku na mt .haraka..eluwa.therenneth na yko.pakaya.?/
/#((3 |
? Google translate was not able to understand it.