FANTASTIC!!.. yours is the 5th tutorial I've watched that has finally answered my queries! The press button that distributes the detergents has to be held in! Finally!.. Thank you! 😅
the rotovac is known to leave the carpet pretty wet after cleaning. i use the same machine with my carpet cleaning service so to reduce the amount of water left after cleaning with one pass i go back and do a dry pass on my way out.
Actually the machine and the video are really good. If you follow the step by step there’s no way to get it wrong. Everything was simple and easy and the result was pretty good
Ive hired one of these today in UK from Homebase. Its soooo loud! Sounds like a pneumatic drill! I phoned up the helpline but they told me that's how it's supposed to sound? I dont think im going to be very popular with my neighbours downstairs... Carpet also quite wet, going to try the second pass technique thanks.
The trick is just put hot water in it. Not the soapy solution. Just spray the soapy solution on your rug wait 10 or 15 minutes. Then do a wet pass with the rug doctor. Then you go back with a dry pass. That way you're not getting a lot of soap left into it. Woo hoo
0:00 Expectation of using rug doctor vacuum and how the sprays work 1:00 Test your carpet for colour fastness 2:30 Settings in rug doctor 3:14 Cleaning a carpet 5:40 Helping the carpet dry
*ARE YOU A TRUMP SUPPORTER?!* O_0 *THATS ALL WRONG!* *Just use a garden pump and spray the area with your formula and THEN go over with this or other machine.* For pet stains, use a solution that eats salt crystals. Otherwise replace the padding of the carpet. *Then let it air dry for 2 hours with only, and ONLY the AC at 70 degrees and/or fans. Opening windows will create mold spores and other living hell in your carpet, m8! ONLY open windows AFTER it dried and then go over it again with a vac.* With my advice you will get a full DIY 100% professional result, guaranteed! :) Just tell me if youre not satisfied! :)
hello I just wanted to know how to put back together a Rug Doctor handle that came apart at the seams I need to know what kind of glue or what do you use so that when I use it to pull the machine back over my Rug to clean it with the weight of the water in it and the machine itself will the handle be strong enough to hold and stay together and not come apart again?
hello it's me again I just wanted you to know that I don't have the money to buy a new handle or use one but if you can tell me what to use that would be greatly appreciated and helpful to me?
fred evans jb weld it's a plastic glue I always here alright stuff also drilling holes and connecting it together with zip ties. Make sure there's nothing going to bother the holes
The best way to use this piece of garbage machine is to leave it at the store. I rented one yesterday and it was the worst piece of equipment I've ever used for any purpose. No rotating brushes and all it did was saturate my floor, smear spots and hurt my back. The company that manufacturers this piece of junk should be ashamed of themselves.
I bought the Rug Doctor Pro X. Same machine as this piece of garbage. If you want to tote bucket and after bucket of water to this joke only to see it stay in the carpet then buy one of these. If you really want to clean your carpet for the same price point then buy a Big Green Commercial by Bissell. If you buy this.. you will regret it with the first pass. The drying process made me laugh. "Simply roll the rug doctor out of the room and wait". Yeah... if you have 2 days to wait that is. Don't over wet the carpet? You designed the RD to do just THAT. Might as well take a garden hose in the house and have at it then walk away for the same amount of time it takes the RD flood to dry.
what If my Rug Doctor handle came apart at the seams where the bolts and srews are attached to the back of the machine how can I fix the handle so it will be strong enough to pull the machine back with the weight of the water in it? what kind of glue or something else can I use to fix this problem
+Mathieu Larocque LoL. You don't need to empty the bottom tank, the water is sucked up into the top tank, which is the one you empty. The bottom tank may just be damp, but that dries out on its own.
Yes you could go through all that trouble. But the water in the bottom tank is much less than what the top tank can hold. So all you do is run it through until complete. But yea if for some reason you need to empty it out you flip it over. But since you like to do things the hard way, simply drill a hole in the bottom tank. LoL.
+Mathieu Larocque if you would watch this entire video it actually shows at the end to use the hand tool to spray it out to the sink mate:) - don't need to flip it and hurting your back in the process.
FANTASTIC!!.. yours is the 5th tutorial I've watched that has finally answered my queries! The press button that distributes the detergents has to be held in! Finally!.. Thank you! 😅
This is the best video I've seen on how to use Rug Doctor.
the rotovac is known to leave the carpet pretty wet after cleaning. i use the same machine with my carpet cleaning service so to reduce the amount of water left after cleaning with one pass i go back and do a dry pass on my way out.
Thank you!! That attachement pièce was giving me the blues!!!
I learned so much from this video better than any other video on youtube.. thanx rugukdoctor.
Actually the machine and the video are really good. If you follow the step by step there’s no way to get it wrong. Everything was simple and easy and the result was pretty good
Ive hired one of these today in UK from Homebase. Its soooo loud! Sounds like a pneumatic drill! I phoned up the helpline but they told me that's how it's supposed to sound? I dont think im going to be very popular with my neighbours downstairs... Carpet also quite wet, going to try the second pass technique thanks.
Ahahhahaha helpline. I mean it's very powerful so neighbors can wait little bit😂
Very informative and helpful. Thank you for posting!
Could you do a demo on a dirty carpet as opposed to a clean one?
ahhh...you may be asking for too much! this will not be in the best interest of the company!
@@tekinmoustafa8141How about the interested of customers?
It does work though, you will want to use it again after seeing what comes out.
Holy cow. Never empty it into your sink. put it down the toilet
wish i read this before i did just that. my poor drains :,,(
The trick is just put hot water in it. Not the soapy solution. Just spray the soapy solution on your rug wait 10 or 15 minutes. Then do a wet pass with the rug doctor. Then you go back with a dry pass. That way you're not getting a lot of soap left into it. Woo hoo
Thanks for the vid I'm actually renting a rug doctor this Friday
Lol, it's just coincidence they uploaded the video 3yrs beforehand...
0:00 Expectation of using rug doctor vacuum and how the sprays work
1:00 Test your carpet for colour fastness
2:30 Settings in rug doctor
3:14 Cleaning a carpet
5:40 Helping the carpet dry
I’ve got a 24 hour rental, and you want me to watch an 18 minute tutorial?
How much pass I have to do? After 3 pass it's always dark...
Rug Doctor, we want the absolute truth... do you pretreat, or push, or "only pull?"
Only pull
you want a quality cleaned carpet...get the pros to do it w/their industrial truck mounted vacs.
*ARE YOU A TRUMP SUPPORTER?!* O_0
*THATS ALL WRONG!*
*Just use a garden pump and spray the area with your formula and THEN go over with this or other machine.* For pet stains, use a solution that eats salt crystals. Otherwise replace the padding of the carpet. *Then let it air dry for 2 hours with only, and ONLY the AC at 70 degrees and/or fans. Opening windows will create mold spores and other living hell in your carpet, m8! ONLY open windows AFTER it dried and then go over it again with a vac.*
With my advice you will get a full DIY 100% professional result, guaranteed! :)
Just tell me if youre not satisfied! :)
Bro what does that have to do with Trump 😂 Your advice is good though so won't go hard on you.
hello I just wanted to know how to put back together a Rug Doctor handle that came apart at the seams I need to know what kind of glue or what do you use so that when I use it to pull the machine back over my Rug to clean it with the weight of the water in it and the machine itself will the handle be strong enough to hold and stay together and not come apart again?
hello it's me again I just wanted you to know that I don't have the money to buy a new handle or use one but if you can tell me what to use that would be greatly appreciated and helpful to me?
fred evans jb weld it's a plastic glue I always here alright stuff also drilling holes and connecting it together with zip ties. Make sure there's nothing going to bother the holes
Perfect and easy
Jayson do you mean debree
I got it on the home depot
Wow
When I press the start button to clean it, it makes a terrible sound. I wish the company would think about this sound
Oh, Buy a good machine. If you've got carpet, don't screw around with the ones from the grocery store.
Used one today, got loads of dirt out of the carpet, thought it was good
The best way to use this piece of garbage machine is to leave it at the store. I rented one yesterday and it was the worst piece of equipment I've ever used for any purpose. No rotating brushes and all it did was saturate my floor, smear spots and hurt my back. The company that manufacturers this piece of junk should be ashamed of themselves.
+Wolf Boy You are a hand tool. czcams.com/video/dVDDT_6woaY/video.html
I don't understand your reply but this machine is still a piece of crap.
sir it's available in Pakistani ? and haw match in Pakistani Ruppes.
Wolf Boy in
Wolf Boy ygyis
House smells like a pub toilet on a sat night after that
daybree
I bought the Rug Doctor Pro X. Same machine as this piece of garbage. If you want to tote bucket and after bucket of water to this joke only to see it stay in the carpet then buy one of these. If you really want to clean your carpet for the same price point then buy a Big Green Commercial by Bissell. If you buy this.. you will regret it with the first pass.
The drying process made me laugh. "Simply roll the rug doctor out of the room and wait". Yeah... if you have 2 days to wait that is.
Don't over wet the carpet? You designed the RD to do just THAT. Might as well take a garden hose in the house and have at it then walk away for the same amount of time it takes the RD flood to dry.
50TH COMMENT!
You're better off buying a carpet cleaner like a Vax
what If my Rug Doctor handle came apart at the seams where the bolts and srews are attached to the back of the machine how can I fix the handle so it will be strong enough to pull the machine back with the weight of the water in it? what kind of glue or something else can I use to fix this problem
How to clean carpet cleaners.
Vax man i
how the fuck do you empty the bottom tank
+Mathieu Larocque LoL. You don't need to empty the bottom tank, the water is sucked up into the top tank, which is the one you empty. The bottom tank may just be damp, but that dries out on its own.
+Moe Dean I mean if you don't use it all... but I just flipped it upside down and problem solved
Yes you could go through all that trouble. But the water in the bottom tank is much less than what the top tank can hold. So all you do is run it through until complete. But yea if for some reason you need to empty it out you flip it over. But since you like to do things the hard way, simply drill a hole in the bottom tank. LoL.
+Mathieu Larocque if you would watch this entire video it actually shows at the end to use the hand tool to spray it out to the sink mate:) - don't need to flip it and hurting your back in the process.
Mathieu Larocque lmao
Co
❤❤❤❤