Thx Brian, I purchased 3 new vtech handsets to go with my single vtech base and single vtech handset. Registering the new handsets was very difficult using the instructions that came with the handsets. Your video was simple to follow and provided the correct instructions for deregistering and then registering all four handsets. Thank you!!
Thanks for the simple, to the point video which solved my phone issue. It really helps to have quick and easy instructions like these, especially when you're frazzled and impatient from previous days of trying to fix the problem with no luck.
I did this once before but it wasn't like this and it wasn't this easy. Thanks so much!! I only added one handset, didn't have to de register the others already registered. I just unregistered the one I wanted to add from it's base, went to my other base and registered it alone. Worked perfect!!!!!!!!!! Thanks again.
BLESS YOUR HEART!!! I've owned my VTech DS6321-3 phone for over 10 years without any issues, and then suddenly in the past few weeks, I've kept getting the out of range, no power error message, without changing any of the locations of the phones. I first thought it was the batteries, even though I just changed them 2 years ago and they still showed a full charge. New batteries didn't fix it. So, I searched, and I've watched around 8-10 other CZcams videos, all giving some sort of 5-8-digit code after pressing *...then # and not getting anywhere. Then, I came to yours! First, your directions were super simple and catered more to my model of VTech phone, and whoa, it worked! I had to repeat the process a couple of times for whatever reason when it didn't register the 1st or 2nd time and then suddenly, it was registered! All 3 handsets are now registered and like 3 new phones once again! You saved me from purchasing a new phone and saving me over $100.00 and kept this phone from the landfill. Thank you so, so much and I hope karma blesses you and you have a Blessed Thanksgiving and upcoming holiday season!
Thank you! I've been fooling around trying to figure out how to de-register and re-register, to no avail. You and your video finally showed me the solution, so now I have three phones working off one base, yay. You're a master and my hero of the day.
Brian - Your video was wonderful! I started to look to see how to sync phones on VTech's website and users manual, but wasn't sure what they were saying about it. I happened across your video and you explained it so well. Within a few minutes I had all 4 phones sync(ed) and working. VTech should hire you to do videos for them. Thanks again!
Thanks, I had to replace a handset. I found a replacement on eBay. Mine is originally from 2007, and I had to press Find Handset until the light blinked, press Find Handset again, then put a handset in the cradle for 4 seconds, then repeat pressing the Find Handset, & put the second handset in the base cradle for 4 seconds. This older model registers by putting the handset in the cradle. Totally easy after watching your video for the idea.
Just have to tell you how amazing this video is! Thank you so much! I just bought a phone from eBay (threw the old one until it was smashed, it took 3 throws). I didn't think the new one was going to work with my old handset, thanks to your video it's now up and running!
so you had a phone from another set, and you could connect it to your base? My phone I got 2nd hand always says "base out of range", and doesnt deregister when I deregister my other phone. My other bases don't have a "Find handset" button... Any suggestions?
I found the answer here: www.fixya.com/support/t5381429-vtech_cordless_reads_out_range_or_no - pretty much press "Menu Select" on your phone, then immediately type "*7890#". This enters a test mode. You should now see Test Base at the top of the screen press the Vol up button until Test Handset is present. Press Menu/Select and you should see SW Version displayed. Press Vol up button until you see regstr clear, then press Menu Select and then Menu Select again.
Thank you so much! I was worried I would have to return the new phone but I work at home and really needed it. Thank you!! Great video and very easy to understand and follow.
Thanks for the information.. at first it wasn't working I saw another video saying I had to derigister my old set then reregister on the new set. They all work now. Thanks again. 😁
Thank you very much for doing this video Brian, I have just bought in the new VTEC system but it did not explain how to register a separate purchased phone. It talked about placing the phone on the base but I have a corded base not a wireless base and there was no explanation. So thank you very much for doing this video I have now been able to successfully registered that phone to the base and it works just fine again thank you
This is the most wonderful video. I watched others that to me made my head spin. You spoke clearly, the video matches what you are saying and even I can do it now! Thank you so much!
Do me a favor, don't take down this video! I used this for a reference when I added a phone to my base a few years ago. Now I am adding another soon. Great reference since I lost the manual to the original phone.
Thank you so very much for this video. It really helped! For no reason, all of a sudden my phone showed the message "Out of range or no power at base". I followed the directions in your video to fix the problem. It took a little time for it to work for me. At first, I was getting nothing... no change. Then all of a sudden I got a message that said "Registering" But, that was followed by "Register failed". But, I kept trying it. Finally, it worked! I think I was holding the find headset button for too long or maybe not for long enough. Either way if finally worked. Thank you so much!
Thank you so much! It worked like a charm, after I went to base to the headset 2, like you suggested. Now I have a phone downstairs in my office and a phone upstairs in my room. Thanks again!
Hey Brian, You have been most helpful. I have been through all the steps and can only register 1 phone that came with the new base set I bought. The other handsets continually says not registered. I have tried un-register and register but only get the not registered.The base unit for the other handsets was fried by lightening
Thanks mate! My first 2 phones I didn't have to register......so when I added a 3rd phone, I was confused when registering came across the screen then failed. Eazy Peazy
+Hey Hey OK let me ask something about your setup...1-do you have any other phones working? if so then go and de-register all other phones...next 2- register ONLY the phone that doesn't work....3- if this works then de-register the other phones and test each one AFTER registering
Quite frankly I didn't have to do that to add an accessory phone to the two that I already had! I just placed the accessory phone on my base and it programed its self automatically!
I'm a bit late in the game but your video is keeping me in it. It was explained in a simple but concise manner. Many thanks. 👍👍👍
Thx Brian, I purchased 3 new vtech handsets to go with my single vtech base and single vtech handset. Registering the new handsets was very difficult using the instructions that came with the handsets. Your video was simple to follow and provided the correct instructions for deregistering and then registering all four handsets. Thank you!!
I was able to register one additional phone without disabling the prior two phones. Thankyou very much for your assistance.
Saved me so much hassle. I unregistered 3 handsets from their bases then registered them with new base Thanks so very much. Your a life saver.
Really good video. Simple to the point and it works. Really irritating the vtech manual does not cover this procedure. Thank you Brian.
Thanks for the simple, to the point video which solved my phone issue. It really helps to have quick and easy instructions like these, especially when you're frazzled and impatient from previous days of trying to fix the problem with no luck.
I did this once before but it wasn't like this and it wasn't this easy. Thanks so much!! I only added one handset, didn't have to de register the others already registered. I just unregistered the one I wanted to add from it's base, went to my other base and registered it alone. Worked perfect!!!!!!!!!! Thanks again.
BLESS YOUR HEART!!! I've owned my VTech DS6321-3 phone for over 10 years without any issues, and then suddenly in the past few weeks, I've kept getting the out of range, no power error message, without changing any of the locations of the phones. I first thought it was the batteries, even though I just changed them 2 years ago and they still showed a full charge. New batteries didn't fix it. So, I searched, and I've watched around 8-10 other CZcams videos, all giving some sort of 5-8-digit code after pressing *...then # and not getting anywhere. Then, I came to yours! First, your directions were super simple and catered more to my model of VTech phone, and whoa, it worked! I had to repeat the process a couple of times for whatever reason when it didn't register the 1st or 2nd time and then suddenly, it was registered! All 3 handsets are now registered and like 3 new phones once again! You saved me from purchasing a new phone and saving me over $100.00 and kept this phone from the landfill. Thank you so, so much and I hope karma blesses you and you have a Blessed Thanksgiving and upcoming holiday season!
Your video is the best video on how to register the v tech phone. You saved from buying new phones. Thank you
Thanks my friend, I tried 100 videos and I almost gave up, and yours is the ONLY ONE that Worked 💪
Thank you! I've been fooling around trying to figure out how to de-register and re-register, to no avail. You and your video finally showed me the solution, so now I have three phones working off one base, yay. You're a master and my hero of the day.
Brian - Your video was wonderful! I started to look to see how to sync phones on VTech's website and users manual, but wasn't sure what they were saying about it. I happened across your video and you explained it so well. Within a few minutes I had all 4 phones sync(ed) and working. VTech should hire you to do videos for them. Thanks again!
Thanks Brian! I don't know why they stopped working, but they work again now.
Thanks for sharing Brian. Your directions were clear and concise. Much better than the manufacturer.
Had a difficult time trying to do this until I saw your video. Thanks for the big help !
It took multiple tries, but I got it to work. Thanks!
Thank you! I replaced an AT&T phone and couldn't get it registered. You saved the day AND it was easy to follow your instructions!
Thank you so much Brian! Your video helps re-register all my phones each time the electricity goes out here! I appreciate your help!
Brenda Lane you are welcome😃
Thanks for going slower for elderly people like myself. I looked at four other videos but they rushed thru instructions.
This is the only video that gave all the steps that I needed to solve this problem. Thanks so much!
Thank you so much, Brian! You helped me so much. When I stumbled on this video, I was about ready to throw our phones away and buy more. You-the Man!!
NAW You the man!!!
I watched your house phone i see the following the rule is register thank you so much for help safe and healthy
Thanks, I had to replace a handset. I found a replacement on eBay. Mine is originally from 2007, and I had to press Find Handset until the light blinked, press Find Handset again, then put a handset in the cradle for 4 seconds, then repeat pressing the Find Handset, & put the second handset in the base cradle for 4 seconds. This older model registers by putting the handset in the cradle. Totally easy after watching your video for the idea.
Just have to tell you how amazing this video is! Thank you so much! I just bought a phone from eBay (threw the old one until it was smashed, it took 3 throws). I didn't think the new one was going to work with my old handset, thanks to your video it's now up and running!
so you had a phone from another set, and you could connect it to your base? My phone I got 2nd hand always says "base out of range", and doesnt deregister when I deregister my other phone. My other bases don't have a "Find handset" button... Any suggestions?
I found the answer here: www.fixya.com/support/t5381429-vtech_cordless_reads_out_range_or_no - pretty much press "Menu Select" on your phone, then immediately type "*7890#". This enters a test mode. You should now see Test Base at the top of the screen press the Vol up button until Test Handset is present.
Press Menu/Select and you should see SW Version displayed. Press Vol up button until you see regstr clear, then press Menu Select and then Menu Select again.
Thanks for the video! To anyone wondering, the manual says that the CS6609 will support up to 5 devices.
Outstanding. Thanks so much. Went the route of de-registering all the phones and started at zero. Success !!!
Thank you so much! I was worried I would have to return the new phone but I work at home and really needed it. Thank you!! Great video and very easy to understand and follow.
Brian, your CZcams explained it when no other source did. Thanks.
Worked like a charm with Vtech CS6919 Had to repeat the registering process for the second handset. Thank you so much!
Your video is extremely helpful. Thank you so much. I could not find this information anywhere in the manual, or on their website in the FAQ'S.
Great instructions. It was very helpful. VTech user manual had no instructions to set up an unregistered handset so thanks!!!
Thanks for the information.. at first it wasn't working I saw another video saying I had to derigister my old set then reregister on the new set. They all work now. Thanks again. 😁
Thank you very much for doing this video Brian, I have just bought in the new VTEC system but it did not explain how to register a separate purchased phone. It talked about placing the phone on the base but I have a corded base not a wireless base and there was no explanation. So thank you very much for doing this video I have now been able to successfully registered that phone to the base and it works just fine again thank you
Thanks, I bought a used handset. Thought it was dead but this video showed how to reset it.
Wow awesome, I registered my three devices in minutes when I could not and was confused watching another video. Thank you very much
Love this video, I was on another video that was way too complicated. Where you have to enter some numbers but this is way easier
I thank you sir I've been through hell and back with this you're the only one that helps me thank you so much God bless you
Worked perfectly, we use them for intercoms in the house, thanks
Thank you for this. I was getting frustrated. You made it easy to do
Thank you Sir. Worked 1st time for all 3 units. You Are The Man!
This is the most wonderful video. I watched others that to me made my head spin. You spoke clearly, the video matches what you are saying and even I can do it now! Thank you so much!
Do me a favor, don't take down this video! I used this for a reference when I added a phone to my base a few years ago. Now I am adding another soon. Great reference since I lost the manual to the original phone.
you can download it...use atube catcher or any youtube download software... "that works"!!
Thank you so much for this! My user manual had no information about this at all, it just said to "see manual" hahaha, you're a life-saver!
Great vid, man. Thanks! My user manual did NOT tell me I have to remove all the handsets to sync another. Appreciate seeing it! Great tutorial.
Clarify D70Hs
Just wanted to drop a thanks, my son had somehow managed to do this. I thought it was a goner but this got it back online
Trelution way to go...yay!!
It worked perfectly. Thanks for throwing me a life jacket I was drowning trying to figure this out.
Thank you so very much for this video. It really helped! For no reason, all of a sudden my phone showed the message "Out of range or no power at base". I followed the directions in your video to fix the problem. It took a little time for it to work for me. At first, I was getting nothing... no change. Then all of a sudden I got a message that said "Registering" But, that was followed by "Register failed". But, I kept trying it. Finally, it worked! I think I was holding the find headset button for too long or maybe not for long enough. Either way if finally worked. Thank you so much!
AWESOME VIDEO ON HOW TO REGISTER AND SETUP A VETECH CORDLESS PHONE THANK YOU SO VERY MUCH SIR GOD YOU FOR YOUR VIDEO.
Thank you, helped so much with registering 5 phones.
Thank you so much man, I had to help my great aunt and uncle set up their phone and this vid taught me how. Now they brag on me how I'm so smart lol
Good job!!!
+Brian Williams you are the man. thank you
Thank you so much I’ve been looking for a video like this because I dropped our house phone in the dish water.
your vid was the best i found on how to get my phones regerstiered
nice to know...thanks
Thank you so much! It worked like a charm, after I went to base to the headset 2, like you suggested. Now I have a phone downstairs in my office and a phone upstairs in my room. Thanks again!
Excellent video. Solved my problem! Thank you Brian!
Thank you very much. I didn't have my manual YOU were a GREAT help ~!~!
Thanks for going directly to the point. I'll let you know if I'm successful tomorrow..
Hey - Brian, thanks it worked, well, it worked the second time!
Thanks, that was easier than finding the manual!
Thank you. Your video really helped me
you safe my life man hahaha thank you for doing this, greeting from México :)
Man Thank You So MUCH! This Video Made It Simple To Register My Devices! You Are Awesome! Thanks For The Video!!!
I am so thankful god bless you
Thank you video was perfect. my mother in law will be happy ;-)
Thank you!! This solved my issue!!
Hey Brian, You have been most helpful. I have been through all the steps and can only register 1 phone that came with the new base set I bought. The other handsets continually says not registered. I have tried un-register and register but only get the not registered.The base unit for the other handsets was fried by lightening
Thank you so much for this video, I thought this setup would be a headache & you made it so simple. Peace.
Tribal Bunny glad it worked for you
Thanks mate! My first 2 phones I didn't have to register......so when I added a 3rd phone, I was confused when registering came across the screen then failed. Eazy Peazy
Thanks a bunch! Worked perfectly!
You save my life thank god for you 🥰
Thank you. Very helpful video.
Worked! Good directions!!
Thank you so much. Worked smoothly.
Dude, you're a GOD. Thank you SO much ❤️
Thank you for your help
thank you so much your video help me
Thank you so much! You saved me 😚
your welcome!
Thank you!! video was big help!
Thank you so much for your video. Very helpful.
Worked perfectly Thank you so much!
Really help ! Thank you so much
Great video
Thank you very much , helped me a lot.
Worked for me, thank you!
Thanks Brian! Great help!
Thank you, worked like a charm.
Thank you for the help!!!
Thank you so much, it worked, very helpful.
Thank you! So helpful!
To everyone that was helped by this video I appreciate your comments and thank you back...we all are in this to help each other in some way!!!
how do I call it just says handset 1 ...... PLZ ANDWER
+Hey Hey answer
I'm not sure what your are asking? How to call your phone? Or how to register your phone?
Cuz I can't call anyone on the phone
+Hey Hey OK let me ask something about your setup...1-do you have any other phones working? if so then go and de-register all other phones...next 2- register ONLY the phone that doesn't work....3- if this works then de-register the other phones and test each one AFTER registering
Worked Perfectly on the 2019 Vtech phone system, Thank You!!!
Can’t thank you enough. I was going in circles!
You’re the man! Thank you!
Perfect . God bless you
great video! worked perfect, thank you!
Quite frankly I didn't have to do that to add an accessory phone to the two that I already had! I just placed the accessory phone on my base and it programed its self automatically!
This works for me thanks so much.
thank you, Brian. I lost the manual :-(
Thank you very much!! God bless.
good morning sir i have cs6619 vtech...not registered alwayshow failed...pls help
Heck yeah. Thatnks for that!
It worked. Thanks.