VTech CS 6124 No Power At Base Solved How to Pair Handset and Base
Vložit
- čas přidán 5. 09. 2024
- In this video, I show you how to register your VTech CS 6124 handset to the base. If you get the "no power at base" message on your handset then this will fix the problem.
Sometimes you have to set the phone back on the base after clearing it and press and hold the "find handset" button until the phone message changes to registering. Then you wait 30 seconds or for a beeping sound and it will be reset.
It say to reg hand set see manual, I didit all night but nothing
Set the phone on the base. Then press and hold the "find handset button". You may need a new handset. I sell them for $1.99 plus shipping on eBay. www.ebay.com/itm/302841806569
@@2012happens I don't have a FIND handset ???? :(
I work at a long term care facilty and many residents have this model and exact problem. This fixed the out of range issues completely. Thanks alot
This worked perfect for me. The only things I had to do after completing all the steps to unregister the phone was disconnect the battery. Once I unplugged the battery and plugged it back in, then I received the To Register option. At that time I completed the To Register process as demonstrated. Thanks very much!!! :)
He is right exactly. Unplug wait 30 seconds to 1 minute plug back in and start where video left off. Thanks for comment.
It's not working
Perfect! Very rare advice from youtubers are this on point and easy to follow. THANK YOU
I got the message, " out of range or no power to base " message on my CS6114. I followed the vtech six step method to correct and didn't work. I followed your step by step method " Menu, *7890#, etc.. Got it to prompt to register. Had to do it a couple of times, but, it finally registered it. I did it with a CS6114 base, which is the plain model of the one you did it on in the video. Thanks a bunch! Your method worked for me.
Old but still helpful. I have a ton of these in my office and if course handset and bases die... So glad i found this video.
Thank you!!!! Trying to register a CS5229 additional handset and got no where (other than having to watch countless you tube videos). Your video did it! Thanks!!
Thanks Anthony. I'm not one of your customers but I'm watching from Mexico and your video helped me fix my phone 👍 Awesome
This worked much better than reading the company manuals.
thanks so much for the video i got it to work thanks so much i can't afford much so getting a new phone was out of the question but because of your video i was able to get it working again thanks so much you have no idea how blessed i am may god keep you and your family safe and healthy
Thanks boss, followed instructions from the manual exactly and couldn’t get them to work, this video did the trick
bro very good video although I'm from Latin America I understood your video perfectly and it helped me a lot with my problems many successes brother
Great video Anthony! I just bought a CS-6114 off ebay which continually gave the 'no base power or out of range', no matter what I tried but these steps did the trick. THANKS!!!
Thanks so much. Exactly what I was looking for!
Tried it with both phones did not work. Just keeps on saying registering.
Same
Me too
*7890#, at 0:43, is not something I would have figured out. Thanks for making this video!
I was just doing a phone install and I’m so glad I found this video
Thanks Bro!!! Worked like a charm. Glad I saw this video cause I almost sent the phone back. I bought a replacement for my cs6719 base/phone and had 2 existing cs6709 expansion phones. The 2 expansions both showed "no pwr to base or out of range" until I followed your video!
Thanks…that worked!!! I had almost given up!
Didn't work. I got so far where it says "registering..." then after about 2 minutes, it says Failed - see manual
Me too
Great step by step instructions
Thanks for this video I want to tell others that these steps also work for the model cs6114-2 programming since the company does not say this type of programming but only pressing to search the # key only once
menu then * 7890 # delete record
to start the search do not leave pressed
On the CS6114 with no answering machine and no "in use" light, I did the codes and cleared registration. It wouldn't register kept saying failed and to see manual for registration. Wouldnt let me enter the menu or anything. When the screen went back to "To register handset, see manual" I pressed the find handset button for 4 seconds then pressed the # key on the phone while it was off base. Registered perfectly. THANK YOU for the codes and steps! I spent two hours trying to register my 2nd cordles phone to the base unti I came across your video!!!
very helpful video. i lost my old vtech phone of like 6 years and bought a new one and it still paired up. mine is a different model and still programs the same. thx for posting
Thanks a mill! I was about to give up all hope until I came upon your page. All the other suggestions amounted to bupkess. Had the V-Tech Dect 6.0 w/Answering machine base for years until the volume increase on the handset stopped working. I was unable to hear the person clearly on the other end. So rather than spend twice as much for the answering machine version, I simply purchased the regular one. Low and behold, I received the same message. I assumed they were automatically compatible? I guess not. Thanks again.
Worked perfectly. I need this for setting up a remote camp site. Many thanks, dood.
Thank you so much. this is great help
May God bless you for the "secret codes" procedure which I did not see in my manual for out CS6519 model. It worked but tell me if I have it right:
Take the phone handset off the charging cradle and hit Menu/Select (it's the top right on CS6519) then star (*), 7, 8, 9, 0 #. Then the phone menu screen should says Test Base. Then scroll up (on my model it is the top of the middle button which says Volume and CID) so that it says Test hand set and then hit the menu button which should result in SW version. Scroll up until it says Net page. Then hit Menu which should result in Registration clear. Hit menu again to confirm and which should result in a confirmation beep (I am not sure if I pressed the middle Volume button to do this).
Then click Off (and make sure no other VTech phone is in use) and place the phone in the charging cradle and. (ignore the "see manual") hold down the Find Handset button for about 4 seconds until you see the phone saying "Registering." And then take a break and in a few minutes it should be registered and working. Or (the video says) you can pick the phone up and press star to start the registration.
We have 3 VTech phones, and to get all 3 working at the same time took some searching. Thank God for your heart to help.
Muchas gracias 🙏
Fue de mucha ayuda
Esta información debería de estar en el manual
Thank you. This was a big help! My phone is working now.
5years later thankyouu def worked!
Thank god lol I been trying to figure this out. I was about to buy a new cordless phone until I seen this video! Thank you !
This worked!!! Thank you!!
AMAZING JOB BROTHER!!
Thank you soooo much!
bro this saved my life
Took a couple of times but it works thanks
Gracias por este video quiero decirle a los demas que estos pasos tambien funcionan para el modelo cs6114-2 programacion ya que la compañia no dice este tipo de programacion pero solo presionando para buscar una sola vez la tecla #
menú luego * 7890 # borrar registro
para inicial la busqueda no dejen presionado
Disculpa no se inglés y me pasa lo mismo con mi teléfono nuevo vtech cs5119 ...a que se deve
Thanks so much your a genius and now my mom has 2 phones :)
it’s workssssss!!!! thanxxx so much!
Had to try it several times, but it worked! Thank you!
Thank you very much, excellent greetings from Ecuador.
Funciona al 100% recomendado.
Thank you so much man... You are the man... It did worked just great
It actually worked. Thank you.
you're the best
Thank you so much, your video was a big help!!!
I bought a Vtech CS6314 (identical in appearance to the one in video) but messaged: “no line”. Changed the wall plug, “no line” still! Saw your video and can get to point where message is: “registering” but cannot press talk and get dial tone. Any suggestions? I don’t think it’s due to a faulty phone line.
Thanks.
I initially had an out of range message and your directions got me through to the Registering message on the screen, but that's where it seems to be getting stuck. For about 2 to 5 minutes it shows that, sometimes the in use light flashes during the process, sometimes not, then it eventually reverts back to see manual. Press #, rinse repeat...What to do?
Does this help if the display has Line In use and the base line in use is flashing
I have model CS6329-3. I tried clearing the handset several times but it is not working because it never gets to the register handset option. Any help would be appreciated.
legit super useful thankyou so much
Thanks a lot, I had to fixed my mom's phone. It took a while but I got it.
Si me funcionó. Gracias
Thank you 😊
Thank you Thank you!! Here's Positive feedback! it worked! Some easy instructions that I could do!
Its pretty easy for date, time and yr. use the select menu
Help, I followed through for the reset, this is a new phone for me, and the screen keeps saying no line…. So I ordered a dsl attachment for it,,, but still not receiving??? I’m lost
ty for posting, it really helped
Hello Antony, thank you for this video. I would like to know if you can help me. How can I reset (factory) the base? I need to pair 4 differents headsets and my base is already register in old salvage headsets. What should I do? Thank you!
So follow the instructions and press "ok" when it says "base" instead of "handset"
Can I register a different VTech phone to my VTech LS6375-3? To explain further, I found a VTech phone with the base, but it's not the main base, and it doesn't actually fit into my LS6375-3 main base cuz of how it is made differently - it doesn't have that extra opening in the place where it plugs into the base! Is there a way to connect it to this other model of VTech if it won't fit into any of the LS6375-3 bases? Like I said, I have the other base for this other phone, but no model number that I can see on it? Or should I just get rid of this extra phone and base because it won't work if I can't plug it into the same base as my LS6375-3???
Can you register several handsets to a base?
I've tried a few times to register my phone & have unplugged it & done this several times but all it does is say its registering then says failed. Am I doing something wrong or is the phone just needing to be replaced
Thank you so mucho. It worked perfectly
Worked for me. Thanks a lot.
Thanks 👍
After hitting Menu Select it still shows on the screen Out of Range or No pwr at Base
This did the job!
If you got a ehco in your handset phone how do you fix it
I fallow all what you did too my phone in case the same one you have in the video. It is still not resistering too the base. I did both the base and the head set and still noting.i need help
It didn't work on a cs6529-26. The base have the light going on and off all the time. I was able to clear the phones handsets (have to handsets) and still can't make it registrated. The wird thing is that both came in the same box with the base.
Well Anthony. I have been trying your process for about a week .I unplugged the battery and I finally got to the Registering phase and there it broke down. I received Failed message and then Not Registered. I did this repeatedly. Any suggestions on how I can remedy this situation?
Me paso lo mismo lo solucionaste?
How can we increase number of rings before it goes to voicemail?? The phone rings 3 times then goes to answering machine.. Annoying because I cant get to the phone quick enough sometimes.. I know we can turn the ANS. off but for Gods sake I would like to have the option to have more rings perhaps 7 or 8 rings then ANS machine.. Any ideas?? Thanks!
Hi do you know how to troubleshoot the vtech VT1301 too??
I have a question my phone keeps making a beep noise when I call.
I have the panasonic set with talking callerid/call block
helps.thank you so much my friend
went through your procedure with 7 phones, was successful with 4 of them, at the end of procedure 3 of them, on the handset, said "failed", what to do?
Hi, is there is any speaker in this model
Does this also work for a cs6929-2?
Can you pair these to a Motorola base?
What happens when you have two handsets as it will only register one
Hmm i tried it several times it takes a while saying registering and i get a failed msg
Good Job! What else do you do besides VTECH Phones? I will subscribe!
1 of my handset says model cs6114 and the other 6124. how can i pair them together the 6114 say no line in display window.
There is no difference in handset. The difference is that when the 6114 was made it was meant to go in a package with only one phone. The 6124 is meant for a double phone package. But they are exchangeable and work with any base. The "no line" means it needs to be reset again. Sometimes you have to follow this process a few times before it works and sometimes you have to put the phone on the base and hold the "find handset" button until it resets.
Me same
Mine beeps twice as if it’s dialing out but no calls are going out I nnnneeeedddd help
This definitely worked.. Thanks man
Cómo sé le puede mover pará k salga el número dé quién está marcado
How do you turn the ringer off / on
Awesome!
Sadly not working for me and I need help!!!!
NEED HELP my handset is not sending out any calls and to make matters worst I just did all this and now its not registering.
Thanj you!
Gracias enserio me funcionó uwu
Do this V Tech 6.0 have a speaker phone on it
I tried this on mines so many times an it's still not registering.what can I do😭
Have you worked with other brands of cordless phones or just vetch
At&t and Panasonic also. They all seem to work the same.
I tried your method more than a half dozen times and it still doesn't work. What else can I do?
Do you have these for sale
It says HS Register I tap the # waited and it says Failed.
On my phone it’s keep saying see Manuel and registering hs
I can't get my phone to register the second phone