Video není dostupné.
Omlouváme se.
Cheap And Easy Way To Extend Your Fence Height Using Existing Posts And Rails | Paul Ricalde
Vložit
- čas přidán 26. 06. 2022
- Discover how to effortlessly extend the height of your fence using existing posts and rails, saving you both time and money. Visit my website for more home renovation resources, promo codes, and discounts on great products at www.paulstoolb...
Our step-by-step guide demonstrates practical and cost-effective methods to enhance backyard privacy and security without requiring complete fence replacement.
Kreg Pocket Hole Kit amzn.to/3bktoPO
Swanson Lighted 2' Box Level amzn.to/3nm7IWe
Worx Nitro 20 V 1/2" Drill amzn.to/3NpCmZi
Worx PegaWork Table/Saw Horse amzn.to/3OIqUcr
Metabo IP56 18V Impact Driver amzn.to/3bsAaDe
Rockwell JawStand Work Support Stand amzn.to/3QPVHWJ
Spyder Masonry Carbide Blade amzn.to/3AcJg1r
This video is about a Cheap And Easy Way To Extend Your Fence Height Using Existing Posts And Rails. But It also covers the following topics:
Fence Height Extension
DIY Fence Upgrade
Privacy Fence Ideas
Video Title: Cheap And Easy Way To Extend Your Fence Height Using Existing Posts And Rails | Paul Ricalde
🔔Want to learn the tricks of the trade from a seasoned home improvement pro? Join Paul Ricalde, a home improvement expert, and subscribe for the latest renovation tips.
www.youtube.co...
🔗Stay Connected With Me.
👉Facebook: / paulstoolbox
👉Website: www.paulstoolb...
=============================
✅ Recommended Playlists
👉 Bathroom Remodel
• Burn and Stain wood Tips!
👉 Videos
• Repair Replace Door Ja...
✅ Other Videos You Might Be Interested In Watching:
👉 How to install door trim the easy way!
• How To Install Door Tr...
👉 PaulsToolbox gets in TROUBLE at Home Depot
• PaulsToolbox gets in T...
👉 Easily Repair and Finish your Ceiling!
• Easily Repair and Fini...
👉 Easy No Mess Trick to Remove Popcorn Ceilings
• How To Remove Popcorn ...
👉 How to make EASY POST CAPS for your Fence, Deck, Gate, or Mailbox
• DIY Tips: How To Make ...
=============================
✅ About Paul Ricalde.
Welcome to Paul's Toolbox, where home improvement expert of 25 years, Paul Ricalde, provides in-depth videos that teach beginners how to renovate their homes using the most cost-effective and efficient tools.
Be sure to subscribe to view the latest home renovation tips
Paul’s work as a professional kitchen designer, bath designer, and hand tool inventor has led him to consult and work with the top tool companies across America. Now, he can recommend and advise which tools you should use to complete your home renovation projects, providing discounts on those tools along the way!
Watch more of Paul’s work with master contractor and Emmy Award-winning television host Brian Gurry on the reality-based home improvement and commercial construction media brand American Builder at www.actionchan...
🔔Ready to take your home improvement skills to the next level? Subscribe for home improvement and cost-effective renovation tips, and make your dream home a reality!
www.youtube.co...
=================================
#fenceextension #diyfence #privacyfence #backyardprivacy #fenceupgrade #gardenprivacy
⚠️Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
Copyright Notice: This video and my CZcams channel contain dialogue, music, and images that are the property of Paul Ricalde. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my CZcams channel is provided.
© Paul Ricalde
I brought an impact driver best thing ever, I use it more than my normal drill 😊
Paul, you were one of the FIRST DIY guys I ever watched on CZcams many years ago. Whenever I see one of your videos now it throws me back to when I was building my house and watching your videos every night to help me figure things out. Thanks for the awesome content.
I can’t tell you how much I appreciate that. I have been dealing with some setbacks but plan on getting back soon. Cancer bit me again but it’s only a bump in the road. Thanks again!
@@paulstoolbox You bet. Praying for you and your journey ahead! Looking forward to your road back to good health and sharing your awesome skills back again on CZcams.
I recently decided I wanted to extend the height of my fence posts. When I looked on-line I was shocked to see the prices of wood. I knew the prices had gone up, but.....WOW!! So I decided to do what you just demonstrated. Now I know exactly how to get it done using the posts I have left over from another project. And I'd love to see a video on how you capped off the posts. Thank you for another excellent video, Paul! And again, I'm glad to see you back and well!
Just found your channel Paul. You have to be the best teacher I’ve ever seen. This is actually an art, especially working with a camera so everyone your teaching can see what you’re doing. Unreal and a huge huge help. Thank you thank you.
Thanks Paul! Showing you making the caps and any other finish steps would be greatly appreciated!!!
I'm glad you mentioned the price, cause that was my number one question. That's fence would cost probably 200k nowadays. It's so sad.
Show it all, man - gonna be a lot more people doing DIY in these coming days - glad you’re doing better 😃👍🙏🏻💪
The content was great, seeing you posting videos again is even better.
Wishing you many happy and healthy years ahead Paul!
Hey Clint, how have you been my body? Thank you for taking the time to watch it especially comment! Do you have a great day!
I'd like to try the caps on my back deck. Also, I'm intrigued by the spider blade. I'm glad your back 😊
Thank you soooooo much for this video. I have a 4 foot fence that I put up for my dog but I really wish I had done taller for privacy.
Thanks Paul for your positive attitude & patriotism in all your projects! 🇺🇸⭐🇺🇸🙏🇺🇸👍
Thank you starblazer, I really appreciate that! God bless!!
I would probably miter those cap runners to give it a cleaner look. Great idea, well thought out and well done
The only problem with mitering the runners is they shrink over time, so your joints will separate. If you glue them with exterior wood glue they may hold up but it would take time. It would definitely look better though. Thanks!
Glad to see you back in action brother. Well wishes to you and your family. would still love to see the crown mitre cuts for intersecting vaulted ceiling. Be well Paul.
I really like your video’s. You explain things very well. Never learned to diy from my father unfortunately, so these videos help a lot. This one in particular will help me fix and heighten my crappy fence. Thank you.
I did the same thing with the pocket holes when I needed to extend the post. Except I used a mending plate between the two post sections and hammered it all the way in.. Seemed pretty solid. Wasn't the ideal method but it worked out for the situation. Still going strong
Thats a good option as well, glad to hear it held up. Thanks for the input!
Yes show the caps. Glad you are back.
Will do my friend, have a good day!
Thanks!
beautiful, sir. exactly what i was looking for 👊🏼
Thank you sir. Always willing to listen. Looks great!
Thank u for showing us how to increase the elevation of the post. What do u do to add on to the actual fence boards though? I have a 5’ fence and want to convert it to 7’
Nice look on the fence, thought about doing the same concept. Great video!
Paul, I love this solution on extending the post. Could wood glue be added in addition to screwing the posts, together. For added strength?
I wonder if his neighbors think he’s crazy for yelling by himself in the backyard everyday. they be like honey the neighbor is outside again
Lmaooooo 😂
Lol, they all know me now, but you should’ve seen the looks I got in my driveway when I was talking to the camera and they we’re passing by!!
Good to see you Mr. Paul. Always love your videos. This was great timing too as I am about to replace some old/warped wood fence. Much appreciate as always!
Thank you Paul. You would have thought it, your amazing and so glad your doing well.
Good morning Paula, thank you for the kind words! Have a great y!
Great video my top fence had to be removed because of a tree branch tipping over the top fence and pushing the top fence over
Cool blade. Glad to see you back making videos.
I think I missed the part where you take the fence from the beginning and get to the end... Did you cut the fence pickets or replace them?
Great video… I’m so frustrated with inflation!! 🤬😡
Nice job thanks for sharing
love your energy and visual work
What about railings when timber extends past the post?
Great to have you back!
Great vid! Info was worth a million and you gave it free!! Thank you!!
Appreciate your knowledge sharing, this is relevant for me now!
Thank you David, I hope it goes well for you!
I love the video. Did you use and cut pickets for the extra height once you increased the height post to make it over 7 feet?
Glad you are doing better.
Thank you I really appreciate that!
Can I do this with deck guard rail post to extend short post?
Good video. I have a 12x20 foot deck that has a 4 ft rail with 4x4 posts that go from ground to 4ft above the deck where the railing is. I want to add a porch covering over this deck. Is it possible to attach
4 foot cut lengths of 4x4 to the front 4x4 posts and make them strong enough to support the roofing lumber ?
Don't forget to check city codes. Here, maximum height is 6 feet.
Good point, I had to get permission from the neighborhood association as well!
@@paulstoolbox I live in a 200+ unit condo association. Don't get me started. I had to get a permit to replace a brick patio with a concrete patio. I had to get a permit to install a screen door, even though many units don't even have screen doors.
@@paulstoolbox how did you do the top of the fence?
Paul Ricalde for president!
You are great but I can barely handle being a fireman….lol. I put wet stuff on the red stuff!
Awesome way to safe money if you just need to raise the height of a fence ♥️😃✌🏼
Great looking fence! 👌
Thank you and have a great day!
Love this fence ! Thats just perfect !
Thank you Brandon!
Hey. Can you show us how to put the cap board on top of the fence? You can come over and use my fence anytime!
Looks beautiful!!! Great idea!!!
Thank you Vivian!
Nice! Thank you Paul.
Hey paul, my 15-year-old cedar fence's posts in concrete are finally starting to rot and lean. I have about 80 posts on the fence enclosing my backyard, only several are wobbly so far, but I fear a nightmarish task looming. What do you suggest? The fence panels themselves of course are still in fine shapes since they are above ground.
Hi Paul, I’m new to your channel. Thank you very much for teaching us the tricks. How can I raise my wood fence for privacy against nosey neighbors. Can I add faux panel to extend the height?
I just had quack contractor extend my existing 6x6 posts from 4' to 6' by notching with the ne to the old, well it doesn't fit together at all, it looks awful and then they blamed it on me, said it as my idea, ummm no it wasn't, I said I paid your extra price for your knowledge and expertise to the job correctly, not to save me a buck, I never said anything about the amount, I anted the job done right! Then it was left up to me to figure out a way to make it look presentable, I honestly have never seen a worse job, and a lot of times I go with the lo bidder!
Wow, sorry to hear that! I’ve seen a lot of jack legs in this business. He should have known better than to do that with 6x6 posts. I wouldn’t expect the average person to know that but a contractor definitely should know better.
Always smart solutions!
Can you show how to cap those post… I wanna add that to my fence… also I have a question about applying epoxy to a live edge cedar slab. Do you have a video on that
Could this be done with cedar 8' length 6"X 6" over 3' length 6"X 6" green treated wood?
For gazebo post
Edit: I have four 8' when I should of bought 10'
Great help!
Can I use a mending plate instead of buying that jig? Thank you
before you do that the township would like to inspect height mostly 6 feet aloud.
Yes, I agree. Codes are all not the same, it’s a good idea to check 1st. Have a good day Joe and thanks!
Nice work
i need to learn this
It would be better IMO to pocket hole up from the bottom part instead of down from the top so water doesn't get into the holes by gravity. Otherwise excellent, use of screws for flexibility muy bueno. As to inflation, Let's Go Braindead!
Thank you Mike, great feedback my friend! I hope we can get through 2.5 more years of stupidity!
Morning Paul.
You did a amazing job, I learned from you to improved myself how to raising fence height.
I was thinking to extended 10FT but I worried it might collapsed, what should I do if that happens?
I'm out of ideas LOL sorry.
I see you used the Craig tool to drill the holes, what can i do if i don't have that tool to predrill holes?
Can you extend the height of a split rail fence where the posts are rounded?
I have a short fence that I wanted to add 6' cedar planks to like over the existing planks ......any thoughts how that could work ??? The same way as you did the fence in this video ?? Any other suggestions???
You should throw a shoutout to your hat, shirt, and pants company.
Nice video. Great Information.
Thank you Christopher!!!
Looks good
But first check your City/County Code for fence height
Yes, that’s good information. 7’ is our limit over here.
@@paulstoolbox
Yes when the city inspectors came to my house...
I had to cut it lower..
I stayed 1 inch under their maximum limit
Hey Paul great video! I live out here in Destrehan. Where are you buying your cedar?
Thanks
awesome my Warrior
Paul, how can I raise deck post that already 3ft thru the Deck and concreted in the ground? I want to put a roof (shed roof) on the deck.
Does it need a city permit to make the fence taller? My backyard doesn’t have that post because it’s a shared fence from my neighbor (boundary fence).
Did you replace all the fence boards, they look brand new?
Hi John, I built it 10 years ago, I pressure washed it the other day so I can re-stain. I really should’ve kept it up better but I had a lot of things going on and sometimes I get laxed on the easy projects LOL. Thanks buddy, have a great day!
Like the fence. Did you need a permit for over 6’?
No, my area does not allow 8 foot fences but if I’m under eight I’m OK.
Would this work so I can attach hooks for a sunshade?
Awesome!!
Good idea 👍
Does anyone know how high you can extend posts safely? I have posts in the ground from my previous fence. I originally was going to dig them up and replace them, but now considering just adding 4ft posts on top of the existing 4ft posts (4ft above ground 2 ft under), just wasn't sure if that would be structurally sound.
Is that a brad nailer or finished nailer?
How did you add fence height? Is the outside of the fence on your property. I would love to raise a section of mine but it butts up to a neighbor’s yard and it just happens to be the reason I want to raise it.😬 any ideas?
Yes the fence is on my property side but I gave my neighbor the good side and decorated mine with Post. I’m very fortunate to have great neighbors all around me. I hear really bad stories about people all over with terrible neighbors, not saying that you have bad ones. Usually when neighbors get along they will split the cost of the fence. Most of the time the person who has the fence installed will put the good side toward them. If the finished boards are facing you, maybe the person before you put up the fence and you can do whatever you want. If your neighbor put up the fence with the finished side on his or her property you may be able to talk to him and put your fence boards taller or the existing rails and Box it like I did. Good luck and have a great day!
But what does it look like on the other side?
A regular fence, I raised the fence height years ago and I recently recapped the posts and I wanted to show how I did it. Thanks!
Check local codes. I know in California over 6’ you need a permit. I know it’s ridiculous.
Another way to bleed a turnip. Have a good day!
Can you double the size of your fence if you have 6 foot fence or do you need to start over? Have a 6 foot fence but need a 12 to 15 foot fence.
Thanks
Deceptive title. Installed a new fence higher than the original and put a bandaid on a fence post.
Lol It is still standing after going through several major storms and hurricanes! I guess I fooled Mother Nature.
The fence was already raised????? Wrong Title🤪
I’m the one that raised the fence, I like to test things and make sure they work. I had to redo the post because I did them in Cedar originally and I wanted treated this time. This was the perfect time to show you exactly what I did and how you can do it yourself. The title is correct. Thanks
Pocket screws but jointing two 4x4’s lol. Gtfo here
Funny, it’s till standing after several hurricanes……Pocket screws lol who would’ve thought.
pr໐๓໐Ş๓ 🤤
This is 37 commercials in one
Ryobi sucks but who made the galvanized nails?
Porter cable
Do you have any of the squirrels who want to make a youtube video?
Any tips fo metal post