Testrun 18-Cylinder double-row radial engine with gear box 2 : 1, Seidel Prop 46 x 50" 5-Blade with about 2000 rpm www.seidel-props.de, detailed report see at www.heilemann-sternmotoren.de
Do you realize the clean up you'd have on your hands after starting this engine up in your living room ? It would be as if a giant picked up your house and shook it like a can of spray paint !!! You'd only do it once !!!
Hut ab! Das ist noch wahre Handwerkskunst und ich bin nicht erstaunt, dass die Heimat dieses Wunderwerks in Deutschland liegt, dem Land der Tüftler und Perfektionisten. Nein, die Zeit der Mechanik ist bei weitem noch nicht vorbei, Bits und Bytes können mal nun nicht fahren, fliegen oder was auch immer. Es wird deshalb immer Leute brauchen, die dieses grosse Talent (mit allem was sonst noch dazu gehört ...) um diese Welt zu verbessern. Bravo!!
@@rainerzufall689 vermutlich schon, aber das ist auch „Handwerk“, man muss vieles verstehen bevor man in der Lage ist so einen Motor zu bauen. Könntest Du es?
@@jean-marcducommun8185 Wenn das so ist - und davon gehe ich aus, ist das eben KEIN Handwerk. Außer der Maus muss die Hand dabei eigentlich nichts berühren. Das Können liegt alleine im geistigen Bereich, also die Idee zu haben, das ganze in CAD zu zeichnen und sich zu überlegen, wie man es im CAM dann gefertigt kriegt. Ob es dadurch leichter oder schwieriger wird, kann man so einfach nicht beantworten. Es ist mehr möglich und dementsprechend bleibt der Schwierigkeitsgrad vermutlich vergleichbar - hoch. Als Vertreter der Bits und Bytes konnte ich diese Schmähung jedenfalls nicht ungerügt lassen. Du kannst das Ding gerne loben, aber nicht als Handwerkkunst, sondern eher als Ingenieurskunst aus Deutschland, was ja auch nichts Falsches ist. Ob das allerding die Welt verbessert... da meine ich, dass es nützlichere Erfindungen gibt. Würde man es beispielsweise endlich mal hinkriegen, eine kostengünstige all-in-one Speicherlösung für Strom in Form eines Seecontainer o.Ä. zu bauen (also keine Batterie), könnte man hierzulande, aber auch in entlegenen Regionen endlich mal ein sauberes, dezentrales Stromnetz haben. Das wäre revolutionär und ich hoffe, dass demnächst mal jemand wirklich den Durchbruch schafft.
@@rainerzufall689 Geh doch mal auf die Hompage und mach Dich schlau so wie ich das gemacht habe statt meinen aufbauenden Kommentar anzupöbeln. Bist ein naseweiser Schlaumeier, ich wette Du könntest so etwas nicht annähernd herstellen. Das sind herausragende Fachleute und ob von Hand, oder mit dem Kopf spielt keine Rolle, das ist wie in der modernen Medizin, wo der Chirurg einen Roboter bedient für die Operation und trotzdem ganz genau wissen muss was er tut auch wenn er das Skalpell nicht in der Hand hat.
@@jean-marcducommun8185 Das heißt also, Chirurgen sind auch Handwerker? Kann es sein, dass für Dich JEDER ein Handwerker ist? Ich habe mir nicht nur die Homepage, sondern erhebliche Teile der ganzen Website angesehen, aber keine Hinweise darauf gefunden, wie hier gefertigt wird. Vielleicht hast Du gerade einen Link als Quellenangabe zur Hand?
Can you imagine 4 of these in a scale B-17 or similar?...you wouldnt be able to tell it was a model form a distance in the air. what an mazing feat of of engineering but the builders. well done.
@@ThomasDoubting5 would be very cool but i don’t think you would be able to power a scaled B-17 with 4 of these and fly in it sadly. For it to be a real useable aircraft, the wings would need to be full of fuel, which is very heavy and this is just a 700cc engine. Which is very very small. 4 of them would barely be 2.8L displacement. A cessna has 6L displacement and 150-200hp but a lot of torque and 2.8L combined is not enough for a plane this big that needs to carry a person. I saw a video yesterday of a group of french that built a massive C47 with 800cc 7cyl radial engines and they did a thrust test and found out the engines aren’t powerful enough.
model... dude... that's perfectly capable of flying a couple people around... easy I would like to see an overhead cam... like Moto Guzzi uses... gear driven... so it sounds like a Porsche.. on steroids
Actually we need five more and four turbojets. Four of this one will do. czcams.com/video/HhJ4Awekw9I/video.html. Six turning and four burning would put that super constellation to shame :D
This is awesome should put it in a model p-47, since the real one has an 18 cylinder dual radial. Personally id also make any actual turbo system for this with the p-47.
Only problem is that it turns the wrong way. ;-) Sure is beautiful! Too bad it's not built for the long haul (due to exposed rockers). I'd like to see it flying cross-country.
Klingt gut, riecht gut und ist schön kompakt. Der wäre bestimmt auch bestens geeignet, meinen Elektrorolli anzutreiben, das wäre dann Rollstuhlfahren (oder Rollstuhlfliegen) auf höheren Niveau.....
Technische Daten und Verbrauch, alles drum rum um den schönen Motor wäre noch superinteressant. Ich war früher auch Modelbaufan, allerdings blieb ich mit 4 Reifen auf dem Boden. Allerdings finde ich einen solchen Motor für den Modellbau schon fast grenzwertig, damit könnte man schon ein kleines Flugzeug in die Luft bringen.
Sadly he passed away in June of 2020. Maybe the new owner will look into a radial conversion. But I suspect they will leave it as it was designed and built. It is truly a work of art.
Perfect for a HUGE Sea fury.....or 4 of them in a 20 foot span Connie.......50 inches of pitch seems excessive though....4 foot forward with every rotation ??? I doubt that. With that pitch. it equates to approximately 442kph@5800RPM. I would argue that one....
Wozu??? Wunderschöner Motor! Aber wozu? Für ein Modell zu groß und für etwas "Echtes" zu klein. Ich würd ihn mir als Deko hinstellen und einmal im Jahr laufen lassen ... aber leider leider doch wohl ein Produkt ohne wirkl. Markt ... aber immer cool, wenn jemand was ungewöhnliches baut!
It’s not the cameras, it the users having their shutter speed set to high. Lower shutter speed and props will blur nicely like our eyes see it. Take a DSLR camera and video a propeller and adjust shutter speed as you look at the monitor. You will see the differences drastically with prop.
I wish I had an engine like that in my living room, so I could start it each time I feel down.
I was thinking the exact same thing, went to the comments and yours was the first one.
Do you realize the clean up you'd have on your hands after starting this engine up in your living room ? It would be as if a giant picked up your house and shook it like a can of spray paint !!! You'd only do it once !!!
@@stevelamperta865 A small price to pay ...
Wow! Crying out for an F4U Corsair air frame. Magnificent effort guys.
Hut ab! Das ist noch wahre Handwerkskunst und ich bin nicht erstaunt, dass die Heimat dieses Wunderwerks in Deutschland liegt, dem Land der Tüftler und Perfektionisten. Nein, die Zeit der Mechanik ist bei weitem noch nicht vorbei, Bits und Bytes können mal nun nicht fahren, fliegen oder was auch immer. Es wird deshalb immer Leute brauchen, die dieses grosse Talent (mit allem was sonst noch dazu gehört ...) um diese Welt zu verbessern. Bravo!!
Du gehst also davon aus, dass das Ding nicht CNC-gefertigt wurde?
@@rainerzufall689 vermutlich schon, aber das ist auch „Handwerk“, man muss vieles verstehen bevor man in der Lage ist so einen Motor zu bauen. Könntest Du es?
@@jean-marcducommun8185 Wenn das so ist - und davon gehe ich aus, ist das eben KEIN Handwerk. Außer der Maus muss die Hand dabei eigentlich nichts berühren. Das Können liegt alleine im geistigen Bereich, also die Idee zu haben, das ganze in CAD zu zeichnen und sich zu überlegen, wie man es im CAM dann gefertigt kriegt. Ob es dadurch leichter oder schwieriger wird, kann man so einfach nicht beantworten. Es ist mehr möglich und dementsprechend bleibt der Schwierigkeitsgrad vermutlich vergleichbar - hoch. Als Vertreter der Bits und Bytes konnte ich diese Schmähung jedenfalls nicht ungerügt lassen. Du kannst das Ding gerne loben, aber nicht als Handwerkkunst, sondern eher als Ingenieurskunst aus Deutschland, was ja auch nichts Falsches ist.
Ob das allerding die Welt verbessert... da meine ich, dass es nützlichere Erfindungen gibt. Würde man es beispielsweise endlich mal hinkriegen, eine kostengünstige all-in-one Speicherlösung für Strom in Form eines Seecontainer o.Ä. zu bauen (also keine Batterie), könnte man hierzulande, aber auch in entlegenen Regionen endlich mal ein sauberes, dezentrales Stromnetz haben. Das wäre revolutionär und ich hoffe, dass demnächst mal jemand wirklich den Durchbruch schafft.
@@rainerzufall689 Geh doch mal auf die Hompage und mach Dich schlau so wie ich das gemacht habe statt meinen aufbauenden Kommentar anzupöbeln. Bist ein naseweiser Schlaumeier, ich wette Du könntest so etwas nicht annähernd herstellen. Das sind herausragende Fachleute und ob von Hand, oder mit dem Kopf spielt keine Rolle, das ist wie in der modernen Medizin, wo der Chirurg einen Roboter bedient für die Operation und trotzdem ganz genau wissen muss was er tut auch wenn er das Skalpell nicht in der Hand hat.
@@jean-marcducommun8185 Das heißt also, Chirurgen sind auch Handwerker? Kann es sein, dass für Dich JEDER ein Handwerker ist?
Ich habe mir nicht nur die Homepage, sondern erhebliche Teile der ganzen Website angesehen, aber keine Hinweise darauf gefunden, wie hier gefertigt wird. Vielleicht hast Du gerade einen Link als Quellenangabe zur Hand?
Can you imagine 4 of these in a scale B-17 or similar?...you wouldnt be able to tell it was a model form a distance in the air. what an mazing feat of of engineering but the builders. well done.
I think you could actually make one that you could pilot yourself with 4 of them in.
@@ThomasDoubting5 would be very cool but i don’t think you would be able to power a scaled B-17 with 4 of these and fly in it sadly. For it to be a real useable aircraft, the wings would need to be full of fuel, which is very heavy and this is just a 700cc engine. Which is very very small. 4 of them would barely be 2.8L displacement. A cessna has 6L displacement and 150-200hp but a lot of torque and 2.8L combined is not enough for a plane this big that needs to carry a person. I saw a video yesterday of a group of french that built a massive C47 with 800cc 7cyl radial engines and they did a thrust test and found out the engines aren’t powerful enough.
Simply astounding! This beautiful engine could be used on a full size home built airplane!
It sure could Tom! Or for an air boat at Hansen Dam?
@@6AL-4V 👍😄
Five blade prop got to be fitted to a sea fury! That would be one hell of a model!
model... dude... that's perfectly capable of flying a couple people around... easy
I would like to see an overhead cam... like Moto Guzzi uses... gear driven... so it sounds like a Porsche.. on steroids
I don't think I have the heart to put such a work of art into a flying model.
czcams.com/video/9rFVBrKj4Qw/video.html
Its rotating the wrong direction
@@tbirdslot69 Nope. It is the frame rate that deceives you
What a beautiful engine !!
Einfach nur krank das Teil 👍👍👍
Awesome! Looks like its performing much better!
Einfach nur der "Hammer" !
Which plane in your mind merits such an engine ???
What a jewel , congratulations !! 👏👏👏👏
Thats an absolute engineering master piece.
I feel emotional lol 😂
Nice work for sure! But I think like the exhaust note on a Moki, much more noticable and deeper.
Beautiful, beautiful, beautiful!
This in a big scale FW190,(with a 3 Blade Prob) awesome!
WOW !!...AWESOME.
Now I need a wingsuit and attach that motor to my helmet!
Schöner Sound!
I can see that on a kit fox in a heart beat sounds perfect 😊
Let's build a giant Super Constellation and put four of them in!
You're my kind of lunatic!
YOU!
I like you!
This indeed was the first thing that came in my mind.
Next thing was 50" Prop ? what the hell are you going to do with such an engine ?
Actually we need five more and four turbojets. Four of this one will do. czcams.com/video/HhJ4Awekw9I/video.html. Six turning and four burning would put that super constellation to shame :D
@@matsgustavsson665 You are weird. I am normal ;)
If you make another one, you could put them in an F7F Tigercat for the most awesome RC plane ever.
Any idea on the power output? That thig is gorgeous
would make a perfect fan for summer in my living room.
Things of beauty are a joy forever!
Приёмистость обалденная!
Beautiful
Good looking engine !
Wow, Klasse!
Wow. How slow does it idle right before it shuts down? Seems like < 200 rpm.
This is awesome should put it in a model p-47, since the real one has an 18 cylinder dual radial. Personally id also make any actual turbo system for this with the p-47.
Sure you would, you’d do this and you’d do that. No you won’t
A beast!
I have no idea what I'd use it in but...WOW ✌✌
двигатель - произведение искусств!!!
Now that's insane!:-)
Ihr seit so krank so was zu bauen ! Alle Achtung ! Sieht geil aus aber der Sound ist bisschen dürftig.
That engine on a Hawker Seafury with that 5 bladed prop will blow my mind and others.
You would probably be able to make one you could pilot if you could build light enough.
Good result!
magnifique
Incredible
for a mechanic/engineer this is called art,
It really is engineering art...
@@stuntdriver2147 indeed, i am impressed
Art for an engineer, nightmare for a mechanic!
Now build a rc plane around that 😍😍😍😍
Only problem is that it turns the wrong way. ;-) Sure is beautiful! Too bad it's not built for the long haul (due to exposed rockers). I'd like to see it flying cross-country.
It turns the wrong way? Just like a Rolls Royce Griffon "turns the wrong way" when compared to a Merlin. What is the right way?
Bläst doch in die richtige Richtung.
sehr shön...
That was cool😊
on a big P47 or an F4U4 for sure.... Or a motorcycle frame....
Klingt gut, riecht gut und ist schön kompakt. Der wäre bestimmt auch bestens geeignet, meinen Elektrorolli anzutreiben, das wäre dann Rollstuhlfahren (oder Rollstuhlfliegen) auf höheren Niveau.....
Technische Daten und Verbrauch, alles drum rum um den schönen Motor wäre noch superinteressant. Ich war früher auch Modelbaufan, allerdings blieb ich mit 4 Reifen auf dem Boden. Allerdings finde ich einen solchen Motor für den Modellbau schon fast grenzwertig, damit könnte man schon ein kleines Flugzeug in die Luft bringen.
Whow...und Sound wie ein Grosser...
Leistung? Für was für ein Modell vorgesehen?
mehr mehr mehr
Is it intended to rotate in that direction? That aside, god doesn't it sound sweet though.
Is the prop feathered? How does that engine stand and the strap anchoring it take the thrust and torque of the engine?
great question, i was wondering the same thing
I think that guy that built the 1/3 scale B-17 needs four of those ........
Bally's Bomber
A B29
Sadly he passed away in June of 2020. Maybe the new owner will look into a radial conversion. But I suspect they will leave it as it was designed and built. It is truly a work of art.
Is that just for rc, or perhaps small single seater?
There probably would be a hell of a lot of FAA certification for the latter, I imagine
Not so much if you were wanting to do an "experimental" rating.
@@MrChugwater Tempting
18 cylinders for a Model Airplane? Absolutely Crazy.
it will be a great model !
👍 👍 👍 👍 👍
Que massa
wie viel ps hat das gute stück
Wie viel Schub macht so etwas?,200kg?
Needs a Seafury....
makes my eyes water.....
Muito loko🇧🇷🇧🇷🇧🇷
Hmmmm - how about a Lockheed Connie, or maybe a 'six turning, four burning' Convair B-36 ;)
Kommen keine Videos mehr?
Has this been put on a airplane yet or is it just for static model?
someday it shall fly ...
der linkslaufende Prop ergibt sich aus dem Getriebe..?..sehe ich das richtig..?
Hawker Fury coming on later ;-)
So how much HP ???
Bearcat "rare bear"
Wie heißt das lied am anfang
What scale are you planning?90%?🤪
How much HP?
Only 40hp
What plane has this been used for?
In the original version, the engine was installed in a Sea-Fury, Corsair or PT-47 ... Or in long-range bombers in the 2nd World War.
Perfect for a HUGE Sea fury.....or 4 of them in a 20 foot span Connie.......50 inches of pitch seems excessive though....4 foot forward with every rotation ??? I doubt that. With that pitch. it equates to approximately 442kph@5800RPM. I would argue that one....
Perhaps you should give some thought to the reduction gearing and prop slippage before offering an opinion.
Добрый день! Сколько стоит этот мотор? Какая мощность в лошадиных силах? Сколько килограмм тяги, выдает с этим винтом? За ранее, спасибо!
how much
What is his horsepower?
Another video had it listed at 40HP
...und nun die "Mutter aller Connys" dazu :-) ??
Wozu??? Wunderschöner Motor! Aber wozu?
Für ein Modell zu groß und für etwas "Echtes" zu klein. Ich würd ihn mir als Deko hinstellen und einmal im Jahr laufen lassen ... aber leider leider doch wohl ein Produkt ohne wirkl. Markt ... aber immer cool, wenn jemand was ungewöhnliches baut!
If you have a model that needs an engine that size just get into the thing and get a pilot's licence!!!!!!
What year is the design of this engine?
About 2015. took some time to make it.
Sorry first test run was 2015. Design a bit earlier.
I would like to know the overall weight of this engine.
I am pretty sure it is in the range of 30kg.
@@mweskamppp I just saw in annother video the mention 22kg
@@hansmueller3564 Me too but here i see some Air filters and maybe a silencer. So i added some kilos from the empty hand.
For the Seafury ONLY
Den als Deckenventilator im Schlafzimmer, da kannste jeden Tag Bohnen essen.
Sie könnten sicher auch m eine Schieberversion umsetzen ...
what is the make/model of the propeller please?
How about reading the description first before asking any question?
@David Lance OK Sherlock
Someone fit a freakishly huge turbo
Reicht fast für einen Ultraleicht
i would build this 700cc engine into a motorcycle 😈😉😋😋😋😋😁😁😁😁
Now put it in an airframe.
Ваш сайт у меня недоступен.
Sounds angry!
Now stick that in the worlds nastiest biggest rc corsair
Modern consumer video technology lets propellers always look silly.
It’s not the cameras, it the users having their shutter speed set to high. Lower shutter speed and props will blur nicely like our eyes see it. Take a DSLR camera and video a propeller and adjust shutter speed as you look at the monitor. You will see the differences drastically with prop.
@@dan4466 Thanks for the tip!
Троит.
echt jetzt ???? 46 x 50 5Blatt..ich glaubs ja nicht..das ist endgeil...
Jesus! Who thinks up this stuff.. I still suck at Lego for Christ's sake!
That engine needs a Prop Guard, anyone can walk into it and end up as bacon slices.
Really ??? If their that stupid then may be it would be a valuable teaching lesson.
Only a pig could do that.