Spray Sealant Showdown | NV Car Care VS Gtechniq, CarPro, Beadmaker, & More | Naples Auto Armour
Vložit
- čas přidán 11. 09. 2024
- NV Lustre:
nvcarcareusa.c...
NV Jet:
nvcarcareusa.c...
GTechniq C2v3:
www.carsupplie...
Technicians Choice Ceramic Detail Spray:
www.carsupplie...
CarPro Reload:
www.carsupplie...
P&S Beadmaker:
www.carsupplie...
Shine Supply Clutch:
shinesupply.co...
Car Supplies Warehouse:
carsupplieswar...?sca_ref=258438.IXCQf5VEEQ
Connect with us!
Naples Auto Armour
SouthWest Florida's New Car Protection Experts
28720 S Diesel Drive Unit #2
Bonita Springs, FL 34135
www.NaplesAutoArmour.com
NaplesAutoArmour
(239) 300-9985
---------------------
► Links to my frequently used products
◦ CarPro Reset Car Shampoo: bit.ly/3cXEOEi
◦ Dirt Lock Bucket Insert: bit.ly/2XTbjPJ
◦ Gtechniq W4 Citrus Foam: bit.ly/30A3Cjc
◦ Microfiber Madness Wash Mit: bit.ly/3f9GrjI
◦ AutoFiber Chanelle Wash Mit: bit.ly/30tvrtw
◦ Gtechniq W6 Iron & Fallout Remover: bit.ly/3hiaYhh
◦ Meguiars Clay Bar: bit.ly/2MRMPjI
◦ AutoFiber Dreadnought Drying Towel: bit.ly/2MOObvB
◦ Gtechniq C2v3 Spray Sealant: bit.ly/2UA3ex8
◦ CarPro PERL Tire Dressing: bit.ly/2XR4FJS
◦ Gtechniq I2 Tri-Clean: bit.ly/2MOLGJx
◦ Rupes 6” 21mm Polisher: bit.ly/3cXFh9w
◦ Rupes Mini 12mm Polisher: bit.ly/2AjfDit
◦ Jescar Correcting Compound: bit.ly/2YdHE2J
◦ Lake Country Microfiber Cutting Pad: bit.ly/2YmpDiK
◦ Sonax Perfect Finish Polish: bit.ly/37bP4Yt
◦ Buff & Shine UroCell Red Finishing Pad: bit.ly/3f1LqD5
◦ FEYNLAB Panel Prep: bit.ly/2Yjh0Fy
If you have any questions regarding processes or products feel free to leave a comment, I am completely transparent when it comes to the products I use.
Definitely gave clutch the short end of the stick. Gotta let that product flash for at least 20-30 minutes before leveling and let it rest overnight before getting wet and the water beading is insane
Yep. It's an awesome product but people are too impatient for it. I still have some but have fallen into the impatient category and just spray and rinse with Gyeon wet coat. Works great and both cars already have Gtechniq crystal serum ultra underneath and they get washed once a month.
I feel like I'm in the "anything decent will get the job done" and wet coat is stupid easy to use and lets me get about cleaning the rest of the car that much quicker.
@@FastRedPonyCar yeah gyeon wet coat is a great maintenance product!
NV Lustre is a beast. Especially when paired with a good AIO like Koch Chemie P601. Top it with Lustre and you can achieve incredible results as both products have active filling resins. Great bang for the buck for a customer not wanting to break the bank but wanting awesome results.
Reload needs to be applied then left 10 minutes or more before you rebuff over again . In this helps with longevity and protection . Two coats is always best and over time outlasts any of products you've listed in the your video . 👍
Florida, particularly South Florida, can kill coatings faster than almost any place in the world. There is desert like direct sunshine, high humidity, 95f days, daily rainstorms, tannin filled sprinkler water, salty air, bugs, tree sap, bird crap, and a ton of road grime. I’ve never had a six month sealant last more than a month here in a daily driven car that’s parked outside.
I used to detail my personal car with Macguires 7 and 26. Then I tried their ultimate liquid wax, which last longer, but didn’t look nearly as nice. Now Im going to try NV Lustre / Jet / Boost combo, but I give it a month or two tops.
Any update on the lustre ?
@@SovereignSoul93 Lustre with Jet lasted about 2 months in our weather and conditions. That's actually quite good for our area. If I didn't park under two sap spewing trees, it probably would have lasted longer.
Great video , I currently have NV Jet on top of NV Lustre , Jet is my favorite sealant .
If you only had to buy one. Which will you buy jet or luster?
@@sciencelife5785 Lustre , the gloss is just insane with it and water behavior is also awesome
@@aalfonso4706any tips for application of lustre ?
From experience and one that is overlooked is the prep work and the products used before application of the sealants. its a possibile that some of the sealants didnt hold up well with this test is because they didn't bond well on the surface, its hard to see the reaction on the naked eye how these chemicals react with each other.... If i may suggest, is to try using a home made IPA instead (this will give u a baseline and eliminates the variables of using same brand products hence gives them the edge or advantage as manufacturers make products that works with their own products or system, and if it works on other brands thats just a plus for the manufacturer and end user of these product, u can start with 30% isopropyl alcohol and 70 % distilled and adjust accordingly to have very good panel that is ready to absorb the sealant. your goal is to have the sealant bond and be compatible with the surface your trying to work on. I bet that after chemical testing most of the products that failed or weak can be revived by simply washing it with Si02 infused wash. hope this helps and give some clarity about the different products also I like your videos and hope u do more
I have used Gtechniq C2V3 for a long time. Just used bead maker for the first time and I am really impressed . It is definitely more work to apply as compared to C2V3 but produces great gloss and amazing slickness . Will give it a few try’s before I decide to switch from C2V3.
Gtechniq is my personal go to. Love this product and is a hot seller in my store. It out sells our 584 three to one.
I stopped looking for new sealants after using the Meguiar's hybrid ceramic wax and their Ceramic Detailer as a topper. I'm getting many months of effectiveness and it does everything I want it to do for extremely cheap.
3:26 - "very little product is needed"
*Sprays half the bottle into the towel to do a tenth of the bonnet*
I was about agree but noticed the trigger spray used by NV care are mainly used for atomization/ fine mist and does not squeeze out a lot of product compared to the regualr trigger spray that most manufacturers used. jmho
But, then proceeded to state he was intentionally over applying the product in the next line..
Nice test Bradley! I love the combination of Polishangel Cosmic Spritz,topped every wash with Beadmaker as a drying aid. Used in this way durability of Beadmaker isn’t an issue...I love Beadmaker because of ease of application (even the first application) and the gloss/slickness...Hydrophobic properties of PA Cosmic Spritz are strong enough to not being affected by Beadmaker. It is true that Beadmaker on his own doesn’t last long and doesn’t have fantastic hydrophobic properties...I must admit that I am tempted to try out the Gtechniq range...
In the end it al comes down to personal preference...there are a lot of good products out there.
Great video and I am glad to see everything goes well with the business! Keep up the good work!
Awesome
I know the Nova jet needs 24-48 hours to harden
I actually really like the smell of Reload, wasn’t necessarily hoping that would be the scent they chose for the air freshener, eraser is perfect, but maybe it’s just Stockholm syndrome from years of using it
Its weird how you watch a video comparison of products on one channel, think youve made your mind up and then see the opposite results on another channel. Ive looked at a few videos that show great durability with Lustre (on Apex Detailing for example) then come here and it performs like crap . WTH?
I've been using Tec 582 for a year. Love that stuff.
Brilliant video Bradley, thanks for going to this level of effort! Excellent stuff
Thank you, Matt! Appreciate your support.
Great video Bradley! I’ve never had much success with Reload, and I’ve always thought Beadmaker was overhyped, but I’ve never used the rest. It’s interesting to see which ones are more chemical resistant than others.
Agreed with Beadmaker being way overhyped. C2V3 I was never a fan of over others in it's category.
Definitely an interesting test! I am with you, never had much luck with reload in the real world, could never get it to hold up past 4-6 weeks, let alone months.
Great video... thank you mr Bradley ... I’ve been a fan of clutch... but this was interesting.
Clutch needs to be applied like a wax on an applicator pad, it needs to be left on the surface for 15-30 minutes so it can fully cure on the paint. Simply wiping the product on the surface is not the way to use the product. However, the correct product to use in this video would be the Punch It synergy spray, which is the ceramic detail spray Shine Supply offers, the beading and hydrophobic of this product by simply wiping the surface down blows these other products away. Check it out.
Very well presented. It would be good to see a test panel with Superior, Griots 3n1, Turtle Wax Solutions Ceramic Spray, TLC2 and Adams. Then you could set the panel outside near the road and then update us on the third and sixth month. Thanks
Excellent, informative video, thanks!
Nice video! Very cool! First one of your videos I've watched but I'll be checking them out. I just got a bottle of TEC582 and haven't even tried it yet but it looks like I did okay, LOL!
So who won?
First time viewer here and I loved your video, very informative. I've been a long time user of Technicians Choice and love the product. I was curious to see how it stacked up against NV Luster and Jet. I've tried two other products by Technicians Choice, Aqua Glow and Lightning Poly Seal. I've found both to be easy to use with impressive results. Also they are extremely inexpensive. My only issue with them is that they use Petroleum Distillates in their ingredients. I've heard mixed comments that Petroleum Distillates are bad for the paint and your health. I was wondering if you are familiar with these two products and your thoughts on Petroleum Distillates? Thank you in advance from a new viewer.
Gtechniq panel wipe is designed to be used neat - why are you worried about it "reacting with the paint"?
Just got lustre and jet. I hope they hold up
Just curious how those held up.
@@VioletJoy they are the real deal exelent product
I have both these and they work well. I have them on my wifes car and when her car is garaged it lasts the 5-6mth and then outside its about 3-4mths. I love them
@@denc6505how do you apply. Foam or microfiber
@@SovereignSoul93 I use microfibre. 2-3 sprays and wipe it in and then wipe it off.
Thank you for the video, I’m currently using c2v3 but can I put bead maker on top of it? What I’m saying is can I use c2v3 with bead maker together? Will it damage the paint?
OK so which one worked out the best
So what do you think is the best To buy
Great video Bradley. Are you able to advise whether you need to throw out your microfiber towels after application like with ceramic coatings? or is that not the case with GTECHNIQ c2v3 Liquid Crystal?
Not needed with c2 v3 - it’s just a spray sealant. only required with ceramic coatings where you’ll end up with glass like participles hence the need to bin
if u dont wash towels soon after application it would be best to err on side of precaution.....here is a trick to ensure no problems. fill a wash bucket and add an 1-2oz. of an APC(optimum power clean is my go to). immediatley throw towels in as u use them. the solution will immediately start to break solution down...then wash as usual.
Hello, i don't speak english, what is the best please ? Thank's
Liquid crystal or beadmaker ?
I kinda enjoy Reload's smell
Hey nice video ! well done! i have Beadmaker now, and not impress by it's water repellent function. If i want to test out Carpro Reload, how can i effectively remove any trace of beadmaker ?
Wait 2 weeks lol
getting Reload after watching this
I dont think bead maker should be in the competition of "the best" 😅
nice job
You should have put hydrosilex in this i have been using hydrosilex for yrs an its way better then alot of them
Car pro reload wins. Hands down.
Beadmaker is by far, the worst and most overhyped automotive product in the world.
Yeah I heard that so I just sold it . Pan the organiser has a lot to answer too .
No TW seal and shine or TW ceramic spray. Those two products would destroy all your over priced garbage.
Just sayin....
Possible. Would love to see a video on it if you have the chance!
I’ve used tw seal and sh8ne and ceramic spray but once cured as not shown here the NV products make all these others look silly , lustre and jet way ahead of these and TW !
Stay away from gtechniq and Autoglym ceramics. Take it from a professional
You're obviously not professional enough. Gtechniq C2 V3 is no different to any other good quality spray sealants on the market. I've been using it on my cars for years without any issues.
@@Fantic1980 you obviously haven’t a clue. They’re not all the same.
I’ve been detailing and trained with the beat for 28 years.
Why do you say that?
Reasons?
Gtechniq is utter garbage. Csl & exos are trash & most overhyped products I’ve ever used
Thanks for your video. I was really looking for a show with nv lustre. Unfortunately (not critisizing) this video doesnt provide indepth details. 1. You shoulda use lighter color like grey or white. 2. You should not use the pressure washer instead shoulda use the garden hose nozzle. 3. You shoulda shown how the water gets beatup on each product n hydrophobic condition. Could have been a better video.