Tutorial, How to permanently restore headlights better than new !!!
Vložit
- čas přidán 7. 09. 2024
- Learn how to permanently restore headlights better than new, Dull headlights or headlights with low visibility are great candidates to restore, this video will show how to permanently fix your car's headlights we will wet sand the headlights and use a clear coat to restore the lens . Beautiful !!!! DIY Headlight Restoration With Clear Coat, How to fix like New this video is for the person who is wanting to restore their headlights wondering how to make them clear how to do a start to finish headlight restoration someone that may be wondering how the wet sanding works. someone that’s wondering how the clearcoat works what kind of clearcoat to get how the clearcoat affects the headlight lens and what clearcoat looks like after headlights have been painted and a good explanation on how clearcoat is actually the headlight lens sealer and of course this is all done with 2K clearcoat which is A great hardner in it so it will give you years of great service. we really appreciate your time if you have any questions at all feel free to reach out and once again we thank you for watching jj ********************************************************************
Please join our community! It would mean The WORLD To Us!!!
Thank you so much for letting us be a part of your world.
Visit our store at:
www.amazon .com/shop/jamiejone...
/ jamiejones_. .
/ jamiejonesth. .
twitter.co
********************************************************************
Product Links
1.3M 53P71 Large Dual Cartridge OV/P95 Respirator Assembly
amzn.to/393luao
NIOSH approved for respiratory protection against certain organic vapors and particulates
A lightweight well-balanced design enhances comfort
The disposable model helps reduce maintenance issues for greater convenience
Multi-purpose respirator assembly works in a variety of workplace applications
Half facepiece design is ideal for intermittent use
2.USC SprayMax 2K Glamour High Gloss Aerosol Clear
by USCamzn.to/3lRixxm
Spraymax 2k Glamour High Gloss Aerosol Clear Part # 3680061
Lasting high gloss
Very good polishability
Maximum resistance to abrasion and scratching
Manufacture date on the can
Hope this video can get your headlights looking new again here is our new paint and clear coat Playlist , we will be adding alot of content enjoy
czcams.com/play/PL8kPE7Ywpu4hVP2v42yEatzT3YMEOLtlg.html
Great channel, subscribed
Thanks Jamie! I plan on doing my 2010 CR-V and Pontiac Aztek. Not quite as simple because the headlight assemblies don't have a smooth curvature to them, but still doable I think.
You know it’s expensive as his headlights are getting any more it does not pay to replace him you might as well just go ahead and put the clear on and will be done with it you could easily spend to $300 a headlight if you’re buying them now definitely worth the time and effort in trouble to do it LOL
Hi Jamie I have a problem with a no start chrysler on your video no start chrysler part 2. Can you please read it and respond back!? George Endress
What’s going on with it exactly
Either you didnt give it enough flash time or work space temperature is below recommended...i can see chicken scratches forming at the middle top section
He went way to high in the sanding
At 3000 grit there is not enough for the clear coat to grab on to
Also his coats were to light
Finish sanding at 800 grit with horizontal strokes
Apply first coat lightly ( Just a tack coat )
Wait 5 minutes
Now apply the second coat
A medium wet coat
Wait ten minutes
Apply the third coat also medium wet
Wait an hour before removing the paper and tape
Clear coat cures between 24-48 hours
Leave it alone for at least a week
If you have orange peel wet sand with 2000 grit
You can buff and polish at this point
Or you can wet sand at 3000 grit and then polish.
Don’t go to heavy with the coats or you will get runs.
If you cleared over 600 or 800 you would of achieved a great key for clear to stick to and not peel. The Paint society channel showed this process going from cloudy 600 scratches to Clear in seconds. Paint peels but good effort!
Well I’m sure there’s different ways but it’s all been doing it forever and it works perfect
Do they not use a per motor or they display spray clear straight on it
Adhesion promoter
@@jamiejonesthecarman
I don't think they used adhesion promoter in that instance. Just 2K rattle can. As you said if it works 👍
@@Carlostype Yeah that would make sense to leave it at a deep cut to give it something to grip onto and if you were going to do that you definitely could definitely do a six 800 even 1000 grit cut clearcoat it over just pause it when you’re done game over I kind of went over engineer this but it’s a tutorial video and if you leave anything out or short cut anything over the years people will just pick up pick up pick it apart