Pocket Hole Perfection! 7 Expert Tips for Beginner Woodworkers!
Vložit
- čas přidán 16. 06. 2023
- If you are brand new to the world of pocket hole joinery YOU NEED to watch this video!
Sit back, relax, and get out your pen and paper as l’m going to sharing with you My Top 7 Beginners Tips for Successfully Starting and using the Pocket Hole System of Joinery.
Now look, you may have heard how some people say that pocket holes suck …..it’s not real…"inverted quotes"… woodworking. Well you know what, for the purists out there that may have some merit but for a lot of us beginners out there…and there’s a lot of us, pocket hole joinery can be the gateway to getting into woodworking and l reckon that’s a good thing.
I hope you enjoy and find the video useful 👍😁
Before l go on...
Link to My Woodworking Plans: DiyForKnuckleheads.etsy.com
Link to the Amazing Massca Pocket Hole Jig That I Use: amzn.to/3N1qBKG
Link to the Face Clamp: amzn.to/3P7bMcc
Link to the Right Angle Clamp: amzn.to/42z4iBB
Link to Massca Pocket Hole Screws (Starter Kit): amzn.to/45Vvxtc
Link to the Massca Pocket Hole Jig for my Aussie Mates! thetoolgroup.com.au/collectio...
Buy Me a Coffee.
Please help my Channel to keep producing DIY Educational Content with a small donation. Your generosity is much appreciated. Many thanks in advance. Cheers. www.buymeacoffee.com/unclekna...
Ways to Support my Channel:
👍 ➡️ Subscribe to my CZcams Channel: / shaneconlan1
👕 Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessories Store!
shop.spreadshirt.com/DIYForKn...
🛠 Tools of the Trade 🛠
Tools l Use, Resource Page:
diyforknuckleheads.com/tools-...
Tubebuddy: Install TubeBuddy for free to help you get the most out of CZcams! www.Tubebuddy.com/DIYForKnuck...
-------------
SOCIALS:
Instagram: / diy_for_knuc. .
Check us out on Facebook: / diyforknuckl. . …………..
Check out my NEW Spanish Channel! All the same videos but in Spanish! czcams.com/channels/iJO.html...
------------
Music supplied by and Released under Creative Commons License 3.0.
Artist: Kevin McLeod
Music Title: Acid Jazz
Have a great day and l’ll see you again real soon. 😁
#pockethole #pocketholejoinery #massca - Jak na to + styl
Very useful, simple instructions and examples - exactly what we need. Plus the high quality humour helps a lot 🤣
😂....Thanks Donnie! Glad you liked it mate 👍😁🇦🇺
Probably the best pocket hole joinery video I’ve seen, I really think this type of joinery allows anyone wanting to make something a chance to create it with minimal cost & maximum accuracy.
Cheers Big Fella! Glad you liked it mate 👍😁🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🍺🍺
I’m an absolute beginner and these fails you have showed actually happend to me. Finally I can stop wondering and turning my brain upside down and start woodworking. Thank you very much for another eye opener lesson. It turned so much lights on in my chandelier that the room is very bright 😂
Awesome! Glad you found the video useful mate 👍😁🇦🇺
C'mon, u-tube is overfilled with pocket hole videos. Not all as good, but the info is there to be extracted.
Put in 'how to decide where to put pocket holes' in my search, yours popped up and I spent the next 8:54 watching. EXACTLY what I was looking for. Subscripted immediately. Thank you.
Fantastic! Thanks for that John and welcome aboard mate 👍🇦🇺😁
Most helpful Pocket Hole Jig Video on the internet - Thank you ! :)
No worries at Claire! Glad you found it useful and thanks for the feedback 👍😁🇦🇺
Say, that bit calling for a drill, not a driver, was a revelation that had me sit up and pay attention. Thanks, Shane!
No worries at all Rick 👍 Thanks for watching mate 👍😁🇦🇺
You should have a shorts channel called "Let me explain.." Awesome explainer here Shane. I'll reconsider getting a pocket hole jig 😁
🤔....Now that is not a bad idea Jesper....thanks for that mate and thanks also for watching 😁🇦🇺👍
Your video gave me things to think about and things to correct in my woodworking venture`s. Excellent video and narration thank you for sharing.
No worries at all Jim! Glad you found it useful mate 👍😁🇦🇺
Another good video Shane, great advice for any new wood worker who might be confused about pocket hole joinery.
Appreciate that Andrew! Thanks for watching mate 👍😁🇦🇺
VERY USEFULL. THANKS A LOT!
Great advice! Thanks!
Cheers Tony! Glad you found the vid useful mate 👍😁🇦🇺
I am not a pocket hole beginner BUT I watched this video anyway. GREAT tips Uncle! !! !!!
Thanks mate! Appreciate you taking the time to watch even though you are very familiar with the tool. Cheers 👍😁🇦🇺
Like a new pirate, guess who still has two legs, two arms, two eyes and all their fingers? ME, a newbie woodworker!! Love your videos Shane!!!
😂....that's always encouraging Don 👍 Thanks for watching mate 👍😁🇦🇺
a pirate who still has both arms and legs is a smart pirate !
Awesome! I have learned so many things from your videos! Thank you!!
No worries at all Carlos 👍😁 Appreciate you taking the time to watch mate 👍😁🇦🇺
Very helpful, thanks!
No worries at all Allison.....glad you found it useful 👍😁
A great intro to using pocket holes, thanks Shane !
Thanks Andy! Appreciate the comment mate 👍😁🇦🇺
Thank you for all the tips, very useful.
My pleasure Marcel! Glad you liked them mate 👍😁🇦🇺!
Awesome video. Thanks a lot!
No worries at all mate 👍👍
It’s always a great day when we hear from Uncle Knackers!
👍😁...Thanks mate 😁
And thank you sir.Great video!!
You're very welcome mate 👍😁🇦🇺
Uncle, thank you for sparking a new hobby please keep up the good work. Love it Top man💯
👍😁....Cheers mate! Appreciate the comment 👍😁🇦🇺
Thank you! This is just what I needed.
Glad it was helpful Susan! Thanks for taking the time to watch 👍😁🇦🇺
Great tips Mr Knackers.Thank you.
Too easy Shaun....thanks for watching mate 👍😁🇦🇺
Always a good day when there's a new video from Shane!
Great tip knacvkkeerrrss!! 😁
😁.....Thanks Richard! Appreciate you taking the time to watch. mate 👍😁🇦🇺
Just an excellent video, very clearly explain, thank you very much.
No worries MC.....appreciate the feedback mate 😁🇦🇺👍🎄
Thanks for those useful ideas.
No worries at all Tahir 👍 Thanks for watching mate 👍😁🇦🇺
Amazing thank you
👍😁....No worries at all Stellos! Thanks for watching mate 😁👍🇦🇺
Great teaching mate, thanks for the video.
No worries at all mate.....thanks for taking the time to watch 👍😁🇦🇺
Uncle you are great. That's it. Thank you.
👍😁.....Cheers David! Glad you found the video useful mate 👍🇦🇺😁
Very clear instructions, as always another great video mate thanks Shane👍🇬🇧
Appreciate that Phil! 👍😁🇦🇺
This was very helpful.
No worries mate! Glad to help 👍😁
I love my pocket hole bit. I look for things to use it on whether they need it or not.
😂.....Yep they can be a little addictive for sure 👍😁🇦🇺
Thanks!
Hey Frank...thanks for the donation mate! Really appreciate it mate 👍😁🇦🇺👍👍👍👍
Love your delivery style and this was great content.
Cheers for that James! Glad you found the video useful mate 👍🇦🇺😁
Thanks. excelent explain
Thanks mate 👍
Uncle Knackers coming through with the goods again! Was primed to buy my first pocket hole jig, this video came out, I watched it and excitedly bought one. First screw I did, I just blasted through the corner and sent it into the other piece of wood, came back and watched again with the torque setting and pulse, some beautiful and solid pocket joints, cheers knackers!
Cheers Troy! Glad you got that sorted mate and all the best with the jig 👍😁🇦🇺
another great video thanks
Glad you found it useful mate. Cheers 👍😁🇦🇺
awesome informations
No worries mate! Thanks for taking the time to watch 👍😁🇦🇺
That was a super informative video, dude and will definitely help those who are just starting out!
Thanks Andy! Appreciate the feedback mate 👍😁
Outstanding
Thanks Brian! Glad you found the vid useful mate 👍🇦🇺😁
Really useful tips👍👍
Thanks for that Craig! 👍😁🇦🇺
Get out of my head. Just this week I have been looking into trying out pocket joinery.
Your video also provides very good info that I haven’t seen any other pocket hole videos, and I’ve watched a lot of them in the last 7 days.
Thanks mate.
That's awesome! Hope you got something out of it Marcel and thanks for watching mate 👍😁🇦🇺
thanks for the tips mister knuckle
No worries mate 👍😁🇦🇺
I love your channel and have learned so much! Thanks from waaay across the pond.
Thanks mate! Appreciate the comment 👍😁🇦🇺
👍👍👍Great video. Thank you
👍😁 Cheers Pete 👍😁🇦🇺
I learned something today❤ty
Cheers for that....glad you liked it 👍😁🇦🇺
Hey shane i allways use your professional tips. You are the best .👍☕️cheers .🇨🇦
Cheers Dan! 👍😁🇦🇺
Great info and brilliantly explaind knackers..will b lookin to get a pocket hole jig. Brilliant to see you back on u tube mate👍👍👍👍👍👍
Cheers Wayne! Really appreciate the feedback mate and thanks for watching 👍😁🇦🇺
Great tips Knackers 👌
Cheers Simon! Thanks for watching mate 👍😁
Thanks.
You're welcome mate 👍 Thanks for watching 👍😁🇦🇺
Thanks for your video, Cheers
No worries mate 👍Thanks for taking the time to watch 👍😁🇦🇺
@@diyforknuckleheads Yes I've had the pocket hole experience but you do have some good tips for beginners!!
Love this one done great tips knacker’s 👍🏻
Cheers Dave 👍👍😁
Funny delivery and useful info god bless you jesus loves you brother
Thank you very much Sam! Appreciate the feedback mate 👍😁🇦🇺
Thanks Unk! Looking to get into pocket hole jigs to make bee hives. Great info!
No worries at all Pat.....good luck with the Bee Hives 👍😁🇦🇺
Every jig system has its own s set it 😤your video is spot on
👍👍
also top marks for the dad joke, I hope every episode has one
😂😂....Thanks Stephanie....yep they all have one 👍😁🇦🇺
Very nice video with an extremely nice and humorous narrator.
I subscribed mainly because of the gentleman's pleasant attitude and knowledge.
Welcome aboard George! Really appreciate the feedback mate and thanks for taking the time to watch. Cheers 👍😁🇦🇺
zomg I wish I had found this channel before! your explanation of the drill/driver torque settings and what that means in practical terms i.e. you could stop it by hand... this understanding could have saved me a lot of hassle 😂😂 thanks for creating and sharing! 🙏
No worries at all Stephanie....glad you found the vid useful 👍😁🇦🇺
Another great video. I am always learning something from your videos. Even the jokes. I shall pass this one onto one of my grandsons. He loves jokes.
😂....Good stuff Edward...hope the young fellas like it 👍😁🇦🇺
Some more great tips Uncle Knackers
👍😁...Thanks David! 👍😁🇦🇺
Love this guy. Just subscribed to the channel
👍😁......Thanks Louis....appreciate the Sub mate 👍😁🇦🇺
Even though I consider myself pretty adept at using pocket hole joinery, I never miss one of your videos. They are nice little handy refresher courses for me to view. Heck you could make a video on how to use Silly Putty properly and I would probably watch it. Great video as always. Thanks!
BTW I have that same jig and a few others, and that Massca Pocket Hole Jig is a real tank. Well built, and should last a lifetime.
Cheers Gregg! Appreciate the feedback mate and you're right.....the Massca is an awesome Pocket Hole Jig.....built to last for sure 👍😁🇦🇺
Great tips as always Shane. The only thing I'd add is that if you are someone like me, who started out using the cheaper, portable / mobile pocket hole jigs, then the face clamp is not just useful, IT'S A MUST. Mobile pocket hole jigs are notorious for moving unless well clamped when drilling and the face clamp jig makes light work of this. Strongly recommended for those using mobile jigs.
Yep good point Anthony 👍👍 Thanks for watching mate 👍😁🇦🇺
I mounted the jig on a small piece of 3/4” plywood with screws and now I clamp or screw the plywood down.
Yes! After I learned to offset the joint a bit to account for the movement from rotation from the pieces, I now realize how ridiculous it all was. Oh well!
Love me some pocket holes. Nice one KNACKERS!!!
Cheers mate!! 👍😁🇦🇺
That's a great angle to drive home some pocketable information. I'll be sure to join it to my existing holey book. 🤣🤣
😂....Thanks mate
Another good informative video Unk, have a good weekend
👍😁...Cheers mate!
Having recently found your channel, I have to say your videos are brilliant and very informative for a woodworking beginner like me. Looking forward to making your wall mounted table. Keep the videos coming and thanks. The jokes aren't that bad 🤣
😂....Cheers Paul! Good luck with the bench mate 👍😁🇦🇺
As always, Uncle Knackers this video was filled with excellent tips. I the look of that jig hanging on the wall. (and thanks for the cool Dad Joke) I stopped the video and shared it with a few lucky friends!
Hahahahaha....thanks PT! Glad you liked it mate 👍😁🇦🇺
One extra clamp doesn't make a second pair of hands just a third hand, or if you're a pirate and miss one hand it makes a pair. This is almost dadjokery 😂😂😂
😂…Very true mate👍
Nice information .very helpful. Thanks
Thanks mate! Great video much appreciated. I’m a new bloke to all this Pocket Hole stuff.
Gollum asked “What’s in my pocketsss?” Know I can say , “A Pocket screw!” A Hobbit joke…. 😮
🤣.....No worries mate....glad you found the vid useful 👍🇦🇺😁
THANKS TO YOU I WAS ABLE TO MAKE A POOL TABLE FOR MY OFFICE USE
Awesome! Hope it went ok mate 👍😁🇦🇺
@@diyforknuckleheads o yess
Good points. Might want to also cover using the correct LENGTH screws for appropriate thickness of board. The types of screws available are more than you showed. The screw (on the right) that you showed which was the course thread, also comes in fine threads with the same type head. Just a thought. Keep on truckin!
👍😁....Cheers Mitch 👍 Yeah there was a lot more stuff that l could have added but you only have limited time to keep people engaged. Thanks for the feedback 👍😁🇦🇺
Great vid mate, always a good mix of straight up information and a bit of humour that doesn't ramble on, top job 👍🏻.
My favourite dad joke. When I was on the Titanic the problems all started when the gaffer said "hey mate, fill up the swimming pool would ya!". On the plus side the swimming pool is still full.... I'll get me coat 😉🤣🤣🤣
😂😂...Touche mate 👍 Thanks for the feedback and for watching! Much appreciated 👍🇦🇺😁
Brilliant video for us beginners Shane - subscribed immediately after hearing the bad dad joke! Just starting using pocket holes and this tells me everything I need to know in simple layman's terms. Thanks
No worries mate and welcome aboard! I hope you can stick around for many more videos to come. Cheers 👍😁🇦🇺
the video is good but is missing a very important part, all the poket hole jigs have a hight ajustment and i do not know exsatly when to ajust the hight, i was hoping that Uncle Nick explain that in this video.
Video aside, it's great to see you on the Tube again. Goes without saying, love the video. Haven't seen that brand of jig before though .... I have the Kreg 720. Good jig, but I think the K5 was a better one. Should have kept it. Cheers and hope to see you in October, mate. 👍🍺🍺
You'll see me there for sure mate 👍 The jig is from Massca....it's a seriously good jig....highly recommended! Thanks for watching mate 👍😁🇦🇺
Great tips. I didn't know about the threads. Worth mentioning too is to use screws that are flat under the head and not tapered. When I bought my first very simple Wolfcraft Undercover Jig they included sample screws that were all tapered which is ridiculous. If you tighten the screw to har the wood will crack. I had looked at videos similar to this one and knew not to use them but it is insulting really. I wrote to wolfcraft complaining about it but never even got an answer.
Yeah that's ridiculous Mat.....not sure why they would have done that 🤔 Thanks for watching mate 👍😁🇦🇺
😂 I still love ❤️ the Dad jokes. 😅
😂😂.....Thanks Henry! Glad you liked it mate 👍😁🇦🇺
Nice one Shane, i need to get one of those face clamps, i reckon they could come in handy for loads of jobs.
Yeah Mark, l highly recommend them mate...very handy 👍😁🇦🇺
For those who really want to avoid the joint creep and want a stronger pocket-hole joint - and have the budget. . . Consider the Castle pocket-hole cutters. The Castle 110 is the least expensive (but not at all cheap) and will give you a 3-degree angle rather than the more typical 15-degree - and that is a good thing.
i thought this mite have been click bait there Uncle Knackers, im thinkin pocket holes?! shit im always getting them from screwdrivers, etc. point down and then i lose all my fortune thru them, i was hopin for a remedy that was cheap, effective and scalable.. LOLOL , good as always UK.
Hahahhaha.....thanks mate 👍
Rofl!!! Beginner! I get it. Clever indeed
😂....Thanks mate 👍
I've had a pocket hole jig sitting in my closet for 3 years unable and I'm a big chicken when it comes to am I doing it right. Well chicken no more after this video I feel confident that I can now use my pocket hole jig. Great joke gave me a laugh for the morning 😂
Thanks for that Nancy 👍😁 Glad you found the vid useful and good luck with the jig 👍😁🇦🇺
Pocket hole is the best. Other systems are mostly scams to sell us expensive tools, except in rare case when the holes must not be visible.
Yeah it's a pretty good system mate which is why it has become so popular 👍 Thanks for watching 👍😁🇦🇺
When i built my tv stand, i over come the issue of the pocket hole being on the inside of the cross rail by insetting back from the edge if the upright. I used 50 x 80mm for the legs and 25 the cross rails were only 40 mm thick. All made of some really chunky reclaimed railway timbers.
👍👍
Glad to see you brother!!! Cheers from the other side of the pond!!!
G'day Frank! Good to hear from you mate and thanks for watching 👍😁🇦🇺
@@diyforknuckleheads you have pateron?
@@frankstoverpurebloodsaltya6441 Unfortunately l don't Frank....
@diyforknuckleheads dang.. well I'll just buy merch.. I would rather support you monthly.. we will figure it out..blessings to you and the wife...
I found only one mention somewhere on Kreg's instructions or videos suggesting to use an electric drill to drill the pocket holes because it rotated at 2500 RPM. Most cordless drill run at about 1600 to 1800 RPM. I always use the electric drill for pocket holes or dowel holes. Try it, you'll be amazed.
👍
I need that right angle clamp that fits in the pocket hole to secure the joint whilst putting the screw in the other pocket hole.
That clamp is awesome Frederic! Highly recommend it 👍👍
I've just purchased a pocket whole jig and I'll get them clamps never used them before so see how it goes I'm laughing at ur jokes more now as I didn't register the first time of listening.. good on ya m8 good to watch u. I've watched some others but can see u got experence
👍😁.....Cheers mate! Glad you found the vid useful and good luck with the jig 👍👍
Just found your 10yr old video on drywall anchors, your vid was one of the first to come up... Just wanted to give you an FYI
Thanks for that Martin 👍👍 Yep 10 years on and still being watched 😂
Kracker video knacker -Ive always been leery of these jigs
Cheers Tony! 👍😁
😊
Thanks but you could have explained what the adjustments on the jig are use for.
Nice to see yu back again Shane, your feeling well?
All good thanks mate 👍😁🇦🇺
@@diyforknuckleheads ideal glad everything is ok👍👍
@@AG-cc1mg Cheers mate 👍
👍
👍😁…Thanks Daniyar!
Great video Shane. Honestly I didn't realize what the different screw threads were all about. Those 90 degree kreg clamps are amazing for holding the wood together for pocket screws aren't they?
Cheers Michael! Yeah mate, those clamps are a game changer 👍😁🇦🇺
@@diyforknuckleheads 🥳
Great stuff Knackers! I'm only a DIY'er and didn't even know that pocket hole joinery was a thing!
How would you fill the pocket hole after screwing? ... Just using wood filler?
Cheers mate 👍 You can actually buy pocket hole specific plugs if you ever need to fill the hole 👍👍
@@diyforknuckleheads What a genius system! Thanks.
Great tips. I’ll definitely be getting some clamps and using your drilling techniques. Thanks.
What do you think about gluing the joints?
Cheers mate and yes.....glue is a great idea 👍😁🇦🇺
I’ve watched a number of videos but no one talks about joining 2x4 into 3/4” plywood or maybe 1x4 into 1/2” plywood. Videos only seem to talk about joining same thickness materials.
How do you determine how to alter installations based on the second material thickness?
Great video, Shane. Are You ready for a kicking in the ashes?😂😂😂🏴🇦🇺
Thanks Mick! OK.....the ashes 🤔 You guys are off to a good start but don't write us off just yet! Gotta say, that ball from Ali that bowled Greene was off the charts!! Cheers mate 👍😁🇦🇺
Ashes 1st test end of day 5 - Aussies 1 😁 Poms 0 😢
@Toni-oy5gu fair play and congrats. Exiting stuff, let's hope the rest of the series is as good. 🏴🇦🇺
@@mickcawley4797 Cracking finish Mick and l gotta say you turned on the weather apart from the last day 👍☀☀