HOW TO FIX / RESTORE FADED LCD ON VINTAGE CASIO GSHOCK DW-6600 | CARA UNTUK MEBAIKI LCD DW-6600

Sdílet
Vložit
  • čas přidán 12. 12. 2022
  • HOW TO FIX FADED LCD ( FAULTY ) VINTAGE CASIO GSHOCK DW-6600
    PROBLEM : FADED DIGITS ON SCREEN.
    - REPLACING THE POLARIZED FILM FRONT AND BACK SOLVED THE ISSUE.
    COMMON PROBLEM FOR OLD DIGITAL WATCHES SINCE THIS GSHOCK MODEL IS FROM THE EARLY 90's .
    POLARIZED FILM TEND TO BE DAMAGED DUE TO OLD AGE.
    PLEASE LIKE, SHARE AND SUBSCRIBE TO MY CHANNEL.
    THANK YOU :)
  • Jak na to + styl

Komentáře • 36

  • @WanNadzirah
    @WanNadzirah Před rokem +2

    Wowwww now it looks brand new!!

  • @vancouverpingpong
    @vancouverpingpong Před 8 měsíci +2

    Thank you for this amazing tutorial!!

  • @collectingwatches
    @collectingwatches Před 8 měsíci

    Thank you! I have a couple of donor watches that I can experiment with and use for practice.

  • @denismzs
    @denismzs Před rokem +4

    I found your channel searching how to restore the lcds from a couple o vintage seikos that came in a lot with some automatic. Keep the videos coming.....
    Can you revert with a link for the films you are using? In the comments of your casio video you say that you are using metallic stickers on the back. Pls provide more details, or make a video with links. Nice job my friend!!!!!!

    • @abukambing177
      @abukambing177  Před rokem +4

      hi sir, about the polarised film i bought it from a shop nearby my area, but u can used any polarised that meant for smartphones, TVs or monitors, it works just the same. and as for the metallic sticker it depends on the model of the watch for instants for Gshock it uses backlight ( illuminator ) so it doesn't need a metallic back polar for it, and for some vintage casios it uses LED for the light... and for this one u need a metallic sticker to make the numbers brighter.

  • @Qtaja
    @Qtaja Před rokem +2

    Se ve como algo demasiado prolijo y profesional; me encantaría hacerlo pero no me animo, no podría tener tanto pulso y delicadeza

  • @mikelcocibi3548
    @mikelcocibi3548 Před 9 měsíci

    Would you be so kind as to tell me where you buy the tinting film?
    Congratulations on your very educational videos.

  • @federicotony2426
    @federicotony2426 Před 9 měsíci +1

    Kalau keluarkan battery memang nak ac reset juga ka tuan?

  • @Kiddomike
    @Kiddomike Před 11 měsíci

    My old DW6600 EL backlight turns on by itself. Then, it will not turn off unless I press the EL light button again.
    Have you encountered this problem?
    Battery is new, by the way.

  • @yerkodiegoborjakvessitchva2183

    YEAH , NICE JOB . PERFECT FIXING . WELL DONE ! 😉👍
    GRETTINS . 😀🤚

  • @28lucky16
    @28lucky16 Před rokem +1

    Great work Sir!
    Short question, did you use simple polarizing film, not "mirror" polarizer?

    • @abukambing177
      @abukambing177  Před rokem +1

      please do not use Mirror Polar, because if you do so you wont be able to see the digital because of the reflective properties... so it will become useless.

    • @28lucky16
      @28lucky16 Před rokem

      @@abukambing177 In all Casios, a mirror polarizer is initially installed on the back side, isn't it? and everything looks great. I didn't quite understand what you mean

    • @abukambing177
      @abukambing177  Před rokem

      @@28lucky16 the trick is to use both normal polarized film on both sides of the lcd... but u have to find the right angel for the film to work... tried the mirror ones... turns out to be worst and looks not original from the factory.

    • @28lucky16
      @28lucky16 Před rokem +2

      @@abukambing177 when apply a film on the back side also needed to choose right angle? Also how we do on the front side?

    • @28lucky16
      @28lucky16 Před rokem

      @@abukambing177 friend, I tried right now to change the rear polarizing film on my g2900, with the rear film removed, nothing is visible at all, and when I glued the polarizing film it became very very dark. What to do?

  • @azriace
    @azriace Před 6 měsíci

    Assalam tuan, izinkan saya bertanya. gshock saya g300 punya lcd selalu terpadam, tapi selepas tekan butang apa2,dia kembali ada. Selepas beberapa saat/minit dia hilang kembali. Kenapa ya tuan?

    • @abukambing177
      @abukambing177  Před 6 měsíci

      Wassalam tuna... oh selalu kalau tekan butang lcd padam pastu ada balik dia menunjukkan battery dah low... voltage current lalu board x cukup.. cuba tukar battery baru then buat AC reset. tgk mcm mana

  • @TechTokOffical
    @TechTokOffical Před 11 měsíci

    Is ot possible to remove the "G" on the backscreen?

    • @abukambing177
      @abukambing177  Před 11 měsíci

      yes it is possible, because the G is just a card that has been placed behind the LCD.

  • @jo.c3528
    @jo.c3528 Před rokem +1

    Hi, do u provide restoration service in malaysia ? 😊

    • @abukambing177
      @abukambing177  Před rokem

      i used to do it last time but now not really coz i dont have time to do it :(

  • @lamoog
    @lamoog Před rokem +1

    saslam bang. kalau nombor nya ada yg keluar tak penuh mcm mana pula ye. masalah yg sama ke

    • @abukambing177
      @abukambing177  Před rokem

      oh tu kemungkinan dia punya Connector ribbon dia kotor... if kalau kes yang teruk, lcd tu dah rosak

  • @Hedymin.
    @Hedymin. Před rokem +1

    And a battery with tweezers... 😲

  • @wronggucci3288
    @wronggucci3288 Před rokem +1

    How much does it cost to get this done

  • @shahaishiteru6879
    @shahaishiteru6879 Před 7 měsíci +1

    Hi tuan,nk tanya bolh

  • @riyazudeen3644
    @riyazudeen3644 Před 7 měsíci +1

    Kedai abang dekat mana bang.. lcd gshock sy mati.. lampu jer nyala

    • @abukambing177
      @abukambing177  Před 6 měsíci

      saya takde kedai tuan... kalau tu hrm kalau penah bukak LCD check balik ribbon dia.. kalau tak mmg kena tukar LCD seketul

    • @riyazudeen3644
      @riyazudeen3644 Před 6 měsíci

      @@abukambing177 assalamualaikum bang jam saya replica say bagi dekat kedai.. dia kata Tak boleh buat.. ada cara lain Tak bang..