This time we take a look at how to modify your Shell Strike DS6. Contact us at Project.Nerf.2.0@Gmail.com Check out the shop www.etsy.com/s... Check us out on Facebook / project-nerf-262678711...
Hey there Chris, could you please do a few nerf-gun-painting tutorials? I am thinking of making it a hobby, as it looks like a pretty cool thing to know how to do :)
Hello there! I have a Modulus regulator, and i'm too scared to rev it too much. Should I be worried about the batteries dying too fast? Btw, i'm new here and want To Paint my regulator. Can you make a video about it some Day?
If the blaster is stock then, It won't kill the batteries super fast. I'm going to be doing a Paint video as soon as the weather here in Virginia stabilizes a bit. Thanks for your support................... Chris
Hey dude how much damage do you think brassing would do. And if you brass would firing six half lengths be decent lol??? I liked the tutorial!!! And do you think it can take a rival appolo spring???
Just got my shellstrike and i wanna minimized it like how you did it! So 2 questions, 1. What tool did you use to cut off the shell holder of the blaster? And 2. What did you use to cover up the bottom part of the blaster?
I cut it off with my band saw, but a good old fashion hack saw would do in a pinch. I didn’t even cover the bottom. If you dot it right it only leaves a couple of small holes.
Typically, when you go up on the main spring, the stock catch spring will no longer be strong enough for the catch to hold, hence replacement is necessary.
Hello! I am interested in doing this same mod. You put in a different spring for the trigger thing, do I need to do that? If so, then please tell me what it is, thanks!
@@projectnerf7920 well the problem is I am new to modding and I do not have any other catch springs. So where could I get one and what one should I get?
I’m not a mod expert but because of how you prime it it would get kind of annoying to put a strong spring in it so is there a way to make a better air seal just curious please respond to this thank you if you have the answer 😃
There may be an upgrade seal available for it at this point, I'm not sure. You could try making a slightly thicker one out of craft foam, but I would caution againts it. I have tried a few times on Hammershots, and never got an improvment. I have had a few of them perform worse. What I will say is that the upgrade spring doesn't make it too bad to prime, so long as you don't try to go too crazy. This one's got a k26 and isn't an issue at all really.
Upgrading to a heavy spring will shorten the life of the blaster. But it’s hard to say how much. Braising it should improve performance a bit. And I think an Apollo spring would work, but might need to shorten it some.
From my experience removing AR's doesn't net much and with the heavier spring load I have found it's best to leave them in to prevent damage if the blaster is dry fired.
Hey! I'm looking to make my shell shock into a sort of rifle, I'm not really someone that does modding. I am hoping to add a grip to the end of the extended barrel, and a stock on it after cutting mag off. Is there a tutorial you could make for this?
You most certainly could brass the shells for more velocity. Not sure how it would affect the spread though. I'll have to test it and see. Thanks for for support, much love.................................... Chris
I was convinced this was a million sub channel by the quality!
You need more subs. You put in so much work!
Wow, thank you! That is such a kind thing for you to say. I really appreciate your support, much love ................................ Chris
That Shellstrike really did turn out nice. Looks awesome, and shoots pretty well. And I love that intro! It’s awesome! Keep up the great work!
Thanks so very much, I really appreciate the support..................... Chris
That thing is just ideal for an under slung 'granade' launcher to fit on a longstrike barrel.
It would make a sweet little Master key
This was very helpful thanks for the help
Glad it helped, thanks for your support......................... Chris
Hey there Chris, could you please do a few nerf-gun-painting tutorials? I am thinking of making it a hobby,
as it looks like a pretty cool thing to know how to do :)
I've been meaning to do that, I think now that the weather has turned for the better, I should go ahead and get around to it.................... Chris
YES!!! THAT LOOKS AMAZING!! that handbar is very annoying xD
Thanks very much my friend!
you could cut the sell posts to shoot sort darts
For sure yes!!
Hello there! I have a Modulus regulator, and i'm too scared to rev it too much. Should I be worried about the batteries dying too fast?
Btw, i'm new here and want To Paint my regulator. Can you make a video about it some Day?
If the blaster is stock then, It won't kill the batteries super fast. I'm going to be doing a Paint video as soon as the weather here in Virginia stabilizes a bit. Thanks for your support................... Chris
great video today
Glad you enjoyed it, I really appreciate the support. Much love...............Chris
Question, what tool do tou use to cut the plastic shell?
For this one I used a band saw, but it can certainly be done with a variety of other tools........................................... Chris
Wow that looks so cool minimized! Like a pocket grenade launcher!
Thanks very much, I appreciate your support. Much love..................................... Chris
You could use different 3rd party shells for mega and rival.
Hey dude how much damage do you think brassing would do. And if you brass would firing six half lengths be decent lol??? I liked the tutorial!!! And do you think it can take a rival appolo spring???
You are a savor.
Lol, hardly my friend. Just a Nerf guy that mods.
@@projectnerf7920 bro I thought my shellstrike was gone forever thank you
Thank you man this was cool! Great job!
Thank you my friend, I appreciate your support 😊
Just got my shellstrike and i wanna minimized it like how you did it! So 2 questions, 1. What tool did you use to cut off the shell holder of the blaster? And 2. What did you use to cover up the bottom part of the blaster?
I cut it off with my band saw, but a good old fashion hack saw would do in a pinch. I didn’t even cover the bottom. If you dot it right it only leaves a couple of small holes.
@@projectnerf7920 Tysm for the advice! Keep the great work!
what is the purpose of replacing the catch spring? I guess I'm a bit confused on that.
Other than that, great video!
Typically, when you go up on the main spring, the stock catch spring will no longer be strong enough for the catch to hold, hence replacement is necessary.
@@projectnerf7920 gotcha. And thanks for replying so quickly!
and do you have any kind of link for the catch spring that you used?
Most of the catch springs I use are leftover springs from blasters that I have scrapped.
Hello! I am interested in doing this same mod. You put in a different spring for the trigger thing, do I need to do that? If so, then please tell me what it is, thanks!
I would highly recommend going it a heavier catch spring if you are going to go up on the main spring.
@@projectnerf7920 well the problem is I am new to modding and I do not have any other catch springs. So where could I get one and what one should I get?
Love it
I’m not a mod expert but because of how you prime it it would get kind of annoying to put a strong spring in it so is there a way to make a better air seal just curious please respond to this thank you if you have the answer 😃
There may be an upgrade seal available for it at this point, I'm not sure. You could try making a slightly thicker one out of craft foam, but I would caution againts it. I have tried a few times on Hammershots, and never got an improvment. I have had a few of them perform worse. What I will say is that the upgrade spring doesn't make it too bad to prime, so long as you don't try to go too crazy. This one's got a k26 and isn't an issue at all really.
Ok 👍 thanks man
No problem at all my friend............................................ Chris
9:48 the fact he left that bullet on his desk made me get mega ocd... Until he picked it up and all order was restored.
*dart
and yes that gave me OCD too xD
What springs you upgrade to on the catch? I’m going to do this as my first mod and want to have the proper parts.
Honestly my friend , I don’t remember. It came out of the bin, but I think it was a k55 from McMaster.
@@projectnerf7920 Thanks I’ll look into that
Where did you get the upgraded piston spring? Where can I order one?
I just cut down a retaliator spring. As Gould be able to grab one from Out of Darts or Foamblast.
Hey also how hard is it to prime?? If you can prime a nexus pro is this still hard?? Is it like Aoen pro or like a k26 takedown???
I have a retaliator and it sucks. Does the stock retaliator spring work with this or do i need to buy a mod kit?
I used a 12kg retaliator spring , I’m sure the stock spring would fit but I doubt you would get any gain in performance
Also sorry for all these questions but if I put a rival appolo spring how much will it worsen it’s life
Upgrading to a heavy spring will shorten the life of the blaster. But it’s hard to say how much. Braising it should improve performance a bit. And I think an Apollo spring would work, but might need to shorten it some.
@@projectnerf7920 alright thank you! This all helped quite a bit. And once I think it through it’s a cheap nerf gun I can buy another if it breaks!
Wait how do you brass the shells?? And how much performance will that add??
With a stock spring?
Why did you not remove the air restrictier?
From my experience removing AR's doesn't net much and with the heavier spring load I have found it's best to leave them in to prevent damage if the blaster is dry fired.
Do you have a link for that specific holster? or anything like it?
That was just a cheapo adjustable you can grab on amazon or ebay.
Hey! I'm looking to make my shell shock into a sort of rifle, I'm not really someone that does modding. I am hoping to add a grip to the end of the extended barrel, and a stock on it after cutting mag off. Is there a tutorial you could make for this?
not to be "that guy" but it sounds like you kinda want a nerf trilogy.
Which is essentially the same thing except bigger and pump action.
Was thinking of brassing all my shells
Let me know how that works out. I considered it myself.
What is it singled
I honestly don’t remember my friend, but I’m thinking high 80s
Brass the shells and you’ll get bigger fps
You most certainly could brass the shells for more velocity. Not sure how it would affect the spread though. I'll have to test it and see. Thanks for for support, much love.................................... Chris
😭 I tried this and i can't put it back together
Send me a couple pics over to the gmail address, perhaps I can help you put her back together....................... Chris
@@projectnerf7920 nevermind I kept playing with it and finally got it to work thanks for the help