RC MJX 14209, 3S, BEACH RUN 2

Sdílet
Vložit
  • čas přidán 13. 07. 2023
  • I had tried several locations, but the surfaces were just not right.
    A trip to the beach seemed a great opportunity to let rip in an open space.
    Finally this truck proved it's worth on the sand. An excellent time drifting & jumping this RC.
    3S supplied battery. Paddle tyre came off before it ran out. 80mm diameter.
  • Sport

Komentáře • 34

  • @JKD_LITTLEDRAGON
    @JKD_LITTLEDRAGON Před 27 dny +1

    Just got this today. Came home and it was here. Unpacked and charging up ready for a bash tomorrow. Cant wait to have a go. The thing is a gorgeous looking beast 😊🙏🙌

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 27 dny

      Well done, good choice. It's a great fun truck. Took me a while to find the right surface for it. But excellent fun when I did. 👍

  • @MysticRiverRC
    @MysticRiverRC Před 10 měsíci +3

    Great little truck! I'm waiting for mine to get here on the 31st. MJX has been killing it!

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 10 měsíci +3

      Thank you for watching & commenting. This really is a well built RC for the money. It's hard to control even with 2S & 75% throttle on some surfaces. But on loose ground like this sand it's great fun. The videos would have been better, but I was too busy having fun to concentrate on footage..! 😁

    • @timmerz8569
      @timmerz8569 Před 4 měsíci

      Mine n the misses 2 are due today

  • @carloshnunez
    @carloshnunez Před 10 měsíci +2

    Very nice
    🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 10 měsíci +1

      Thank you very much. It's a really great value RC. On sand it was great fun. Very fast, but you can drift it easily enough. Thanks for watching..! 😁

    • @user-lu5gx4im9f
      @user-lu5gx4im9f Před 10 měsíci +1

      That's great. I'm waiting for it to be delivered

  • @Del350K4
    @Del350K4 Před 10 měsíci +1

    Ah, now this is, a truck I could want, because I like the cage, with a nice Land Rover-like steep "windscreen" bit, and the whole vehicle looks like a full-size comp safari wagon from the 1990s or 2000s.
    You did a terrific job of getting good shots of a fast-moving vehicle.

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 10 měsíci

      Thanks Del. I think I could have done a better job with the footage. But I was just enjoying it too much. There was a lot of footage of it scooting along the sand in the distance. I was a little disappointed on the first couple of runs locally as I couldn't get it to drive in a straight line. Luckily I persevered & tried it on the sand.
      The style definitely grows on you. It's also very well built. Goods shocks & very heavy low down. Waiting for the rain to stop to try it on some dirt trails next. 👍
      Hope it's not too hot in your part of world right now?

  • @dutch_rc
    @dutch_rc Před 9 měsíci +1

    Great truck, ordered today ✌🏼

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 9 měsíci +1

      Thank you for watching and commenting. It's a great fast RC. Well done for ordering. 👍

  • @theminiatureconstructionco4556
    @theminiatureconstructionco4556 Před 7 měsíci +1

    They seem to work really well. Great rooster tails!

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 7 měsíci

      Thanks. It was a handful on some surfaces. I almost gave up on it. I even had to try the embarrasing 75% throttle. But the sand was a real blast. Forgot to secondary glue the paddle tyres before I went though. They lasted about 10 minutes! Live and learn. 🙄

    • @theminiatureconstructionco4556
      @theminiatureconstructionco4556 Před 7 měsíci +1

      @@RC3DPrintAdventure are they not pre-glued?

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 7 měsíci +1

      @@theminiatureconstructionco4556 They are. But with the minimum amount.

    • @theminiatureconstructionco4556
      @theminiatureconstructionco4556 Před 7 měsíci

      @@RC3DPrintAdventure gotcha, just for future referance.

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 7 měsíci +1

      @@theminiatureconstructionco4556 I think I saw that Mr.Tomley had this issue. So I should have remembered.

  • @nodnarbsuahdlef
    @nodnarbsuahdlef Před měsícem +2

    Gotta find some dry deeper sand and this thing would rip w paddles

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před měsícem

      Agreed. Not a huge benefit of paddles on harder sand. But still great fun with 3S.

  • @Fonzierc
    @Fonzierc Před 10 měsíci +1

    Love it this looks awesome great run 👌

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 10 měsíci +1

      It is a really quick & well built little truck. It wasn't much good on grass. Terrible on dusty tarmac. Just couldn't keep it straight. But on a loose surface like sand it's excellent. Wouldn't have focused more on the footage but I was having too much fun. Thanks for watching & commenting..! 👍

    • @Fonzierc
      @Fonzierc Před 10 měsíci +1

      @@RC3DPrintAdventure fun it's the most important factor 😎

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 10 měsíci +1

      @@Fonzierc 👍😁

  • @mariomozie2102
    @mariomozie2102 Před 2 měsíci +1

    It's certainly rips on paddle tires

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 2 měsíci

      It's great fun. Strangely when you add power it pulls the truck straight rather than sliding sideways. Thanks for watching & commenting. 👍

  • @ungurdani8346
    @ungurdani8346 Před 4 měsíci +1

    Salut my friend super car super video subscribe subs.

  • @Ander5onAdventuresinScotland
    @Ander5onAdventuresinScotland Před 8 měsíci +1

    Nice one,. Recently grabbed one of these also did some beach runs and a skate park session. Good fun! Where did you pick up the paddle tyres?

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 8 měsíci +1

      Thanks. Yes, they are really good on the right surface. The paddle tyres were just from Aliexpress. But make sure you give the tyres another shot of glue. I had to cut the 3S run short as it blew a tyre off. Thanks for watching & commenting. 👍

  • @definitionxmk
    @definitionxmk Před 9 měsíci +1

    love this! just curious, how do you clean that after salt water basically got into it? i've seen people just throw a hose on the entire car.

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 9 měsíci +1

      Thanks glad you like it. Luckily the body design is pretty good & not much debris got inside. I took the wheels off & washed out all the sand I could. Dried it as good as i could. Then used GT85 spray everywhere to dispurse the water & lubricate. It stinks but does dry out mostly after a few hours. I got the tip from Tomley RC. I can't find his video right now. But if I find it I will post a link. The MJX looks just fine now after it's beach run. It had been difficult to find a good surface to run it on. But it loved the sand..! the only thing I forgot was the paddle tyres need extra glue before running. The MJX spat a tyre off after 10 minutes. Thanks for watching & commenting. 👍

  • @arttagata2282
    @arttagata2282 Před 10 měsíci +1

    Please add the link to where we can get the paddle tires you used. Thanks.

    • @RC3DPrintAdventure
      @RC3DPrintAdventure  Před 9 měsíci

      www.aliexpress.com/item/1005005196417200.html?spm=a2g0o.order_list.order_list_main.71.21ef1802wSKwos