Parametric Facade (Grasshopper Tutorial)
Vložit
- čas přidán 12. 07. 2024
- In this Grasshopper tutorial, we will model a parametric facade based on the twisting louvers of the Luanda sports Pavilion. First, we will model a straight surface and then we will divide it to vertical strips by using the Isotrim command and then we will use a line to define the openings.
More info👇
bit.ly/2qvNnE8
Enroll in our Course to learn Grasshopper step by step👇
parametrichouse.com/course
👉 Subscribe to our CZcams channel 📹
czcams.com/users/parametrichou...
🗣 Remember to hit that bell notification button! ⏰
👍 Like our videos to hear from us more often! 😊
Comment below to support us! 📝
In this Grasshopper tutorial, we will model a parametric facade based on the twisting louvers of the Luanda sports Pavilion. First, we will model a straight surface and then we will divide it to vertical strips by using the Isotrim command and then we will use a line to define the openings.
More info👇
bit.ly/2qvNnE8
Enroll in our Course to learn Grasshopper step by step👇
parametrichouse.com/course
👉 Subscribe to our CZcams channel 📹
czcams.com/users/parametrichou...
Your tutorials are really helpful and very high quality. Keep them coming!
🙏
You sir are a genius! Thank you so much.
Thanks man the voiceover was really helpful in understanding the lists and whats really going on
You're welcome
Thanks man
🙏
The tutorial was transparent and very illustrative. I'm trying to solve the same problem with two lines instead of one. It's an intriguing problem.
Glad to hear it's useful...that's a good exercise :)
Hi! This has been so helpful!! Is it possible if I could add some parametric distribution of an object over the louver? Like distributing small square pyramids over each strip? I tried to do that but the only way I could think of is using isotrim and area to get a plane to orient my object on the strips. But I was facing problems doing it. It would be extremely helpful if you could guide me on this.
hi thank you for the very useful tutorial and i have a question about how to aplly curved surface .. it makes a problem when i set it in grasshopper?
Great tutorial! 1.5 speed is even more clear hhhh
:)) great idea
Brilliant tutorial. Can you show how we can lay the components for laser cutting?
Thanks...sure we will take a look at that soon
Can i apply this into curved surface? Do you have tutorial video about that?
Thanks for this tutorial. I tried following it with a surface I created but when I bake it's not really dividing my surface and instead of rotating the louvres it just created circles on the curve I created to divide my original surface...
Great tutorial! I really like your style!
Id Love something jewelry related in you are ever looking for Inspiration!
You're welcome 🙏 we will also do a jewelry tutorial soon
Thank you for the material! how to make dotted connections between notes? I only get solid lines. because of this, I can't build a loft.
is there anyway to adjust the intensity of the rotation with respect to the number of panels? For example if i set the number of panels up to 20, the first panels in the series wont turn until i increase the angle, the that time the panels in the end of the series have douled over, something that would be rather unfeasable to fabricate in real life
How would I add a second line that also creates openings so that I have 2 instead of 1 , I copied the commands we already made (Curve > Point on Curve > Line > Surface Split) and while that does create the second line it does not create another set of openings on the surface
Anyway thanks for the awesome tutorial!
Hi, when i use the DBrep to get the top and bottom edge, i use to change edges to reverse. If i don't it keeps picking up the vertical lines. Howcome?
I think there's an easier way to convert the surfaces into solids, use the offset surface node, then loft them and then join all 3 surfaces with brep join. Seems to work nice
Also thank you for the tutorial !!!
Great tip! Yes, that's a better way
Can you make a path between the points? If so, how?
How do i stop the other running commands to bake the loft at the end?
Where can I find out how this works on a freeform surface?
Great video! At point 9:00 8 can’t join the up, middle, and down curves to the plug curve to join the loft
press shift
kiss you!!! I was already desperate to connect with the loft, but everything turned out to be so simple! Mercy!:)@@mohabzidan352
hi. first thanks for this tutorial. i did try this today but when i try to connect list items and rotate with a curve, i cant connect two items. if i connect rotate with curve, i cant connect anything anymore. do you know why? cause i am trying to learn grasshopper so new so i didnt get it. thanks
I am getting an error at the isotrim component right away: "1. Subsurface is invalid because the trimming V-domain is singular" because I have a custom shaped, yet a simple planar surface. what is the workaround for using a "trimmed" surface? thanks.
I am actually still getting the same error with a newly created rectangular surface...
I figured it out. I was using the regular divide domain not divide domain 2
Hi, I have a question! At 13:34, when you connected "curve" to "offset curve", why it cannot choose the direction of offset curve in that battery?
and the second question: at 08:52, why I cannot connect that 3 components into the same curve at the same time? Thanks
Could you solve it? I have the same problem 😭
@@anggiehernandez819 press shift, had the same problem and was just that 🤣
I have a problem. My surface is still visible behind the louvers? Any idea why?
Dear my friend
I have a question about this tutorial
I want to create a closed area with a curve and only apply action to this area .
For instance i want to draw a circle and have holes in the circle area only.
How?
Thank u for your comment
we actually have other tutorials related to striped facade. Search on our website for more info
@@ParametricHouse
thank you for your reply
Can you give me an email or phone number to tell you what exactly i want?
Hey guys ..why isn't graph mapper working for the openings?
great tutorial but it would be even better if you could try it on an organic surface and upload it please
why i cant choose the edges for curve
Please provide more information
why mine doesn't look like that? :C
same HAHAHA I can't connect the three commands to the curve/loft (last step of the tutorial) only one connects...