2018-2020 Jeep JL or Gladiator | ARB Full-Width Steel Front Bumper
Vložit
- čas přidán 15. 11. 2020
- Matt shows you how to install an ARB Full-Width Steel Front Bumper on your 2018-2020 Jeep JL or 2020 Jeep Gladiator.
Product Info:
www.cjponyparts.com/arb-bumpe...
This ARB Black Steel Bondi Deluxe Full-Width Front Bumper is inspired by the classic ARB TJ Wrangler bumper to fit your JL! Its durable steel construction protects your vehicle with its single-piece press-formed center pan and bash plate under the panel. This bumper can accommodate Warn, Bushranger, and Smittybilt low mount model electric winches at up to 10,000 pounds. It features multiple provisions for several additions, including space for OE fog lights, ARB Intensity LEDs, and two (2) integrated chassis-mounted recovery points. This bumper will add approximately 34mm to the length of your vehicle and weighs about 143 pounds total. About 42 pounds of weight is removed from your Jeep before installation.
Check out more parts from CJ's here:
www.cjponyparts.com/jeep-part...
Subscribe to CJ Off-Road on CZcams here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad
To keep up with all off-road info, check out our Resource Center here:
www.cjponyparts.com/resource-...
Music Provided By:
www.epidemicsound.com/
#CJOffRoad - Auta a dopravní prostředky
By far the best, most detailed installation vid I've seen. I also appreciated the detail included in getting the lights/wire harness removed from the factory plastic bumper!
Hands down the best looking full width on the market..kudos to ARB
Looks awesome! Nice new bumper.
I installed the same bumper on my JL Wrangler Rubicon; no complaints and I love it! ARB products may cost a bit more, but they are much better quality than the average aftermarket offerings. 😎
That's a nice looking bumper👍
Beautiful bumper
Awesome reviews
I just picked this bumper up and I'm gonna love it. But I wish they powder coated that bash plate. Should I go through the trouble to do that?
I love that bumper, but I have to say I don’t watch your videos a whole lot just because I feel like I’m competing with the music on what I can hear, it’s really annoying you guys should really just consider not having background music especially music that is more upbeat than what you’re talking
Amen to that - I muted the sound which is a shame
I completely agree. Great video. Great instructions. But the repetitive music over and over is too much. If I wanted to see a music video, I would watch Mtv.
The bumper looks HUGE in video and pictures. How are you liking it in person? Does it seem huge in person?
Great info and shows. Your time and efforts are appreciated.
Michael Herrell
The bumper looks amazing and I want one so bad but I wonder, what about front parking sensors?
Man, that looks sturdy - but HEAVY as heck! I wonder if we Jeepers really need 2-ton, mega-bumpers on our vehicles or if we just like the way they look?
Its an extra 100 lbs.
Have you see adaptor plates for the Mopar 3 point LED fog lights? I am having issues finding anything that will will fit from my 2020 JT Sport S. Also it seems the fender flares sit too low on the Sport and Sahara models as it causes them to flex upwards.
Do you know if this bumper can be installed on a Australian spec right hand drive JLU Rubicon?? Looking to have one shipped over as its not available in Aus unfortunately. Nicest looking full width bumper on thr market imo
Great Vid ....how heavy is the bumper ?.....must be a beast \-/
great video -which WARN winch is this? I thought you said DR12S but I can't find that one...Thanks!
Shipping weight is listed as 160lbs. Is that accurate for the weight of the bumper? Or is it closer to other steel bumpers on the market? (Around 100-110)
What are your thoughts on the weight of the whole bumper? I’m debating between this one or the addictive desert designs full width. And that one is 50 pounds less. Primarily daily vehicle and overlanding
Does this bumper completely block the front trail camera view?
So you have your tow hooks mounted With a single tiny bolt? Are you just pulling this thing off immediately and sending it back?
Can the tow hooks be removed/installed with the bumper on the Jeep?
Clicked to see how much... OUCH! More expensive than the last project Jeep I bought.
How much weight are you adding with this install?
Can this bumper can accommodate 37 or 38s?
Can I fit that on a JKU???
Nice job, how is the clearance between the bumper/winch and the grill, can you remove the grill easily ?
you will have to remove the bumper to get the grill out.
Does the bull bar block a front trail cam?
This thing weighs 200 lbs +50 lbs for the winch=250 lbs. Really interesting how often sellers "forget" to share this vital piece of information with inexperienced customers. What it really means is to install it you will need to modify the factory front suspension that will sag 3-5 inches under all the extra weight. Factory plastic bumper is roughly 35 lbs . There are some very good alternatives to ARB that are full steel , full width, and way better engineered to weigh less. Mine is 75 lbs, full steel. Looks exactly the same.
I would like to know what you have? I’m interested.
@@kmichaelp4508 I have a two door 2023 Willys. I installed 331201T GoRhino one piece full width stainless steel bumper, winch capable. Not sure why they say it's 89 lbs - I weighed it with all the pods and light bar installed - 75 lbs. Two weeks ago hit a racoon at 50 MPH - no damage to bumper. I really like the additional protection for the pod lights and light bar. It sucks that I had to buy the skid plate separately - another 250$. The price adds up to 1000 + with shipping, similar to the ARB, but it's way way lighter and I really don't know why you need all the extra weight in ARB - probably for some extreme rock crawling.
👍👍👍👍
How much does it weigh. Really interested but might be too heavy for my two-door.
Dang, this one isn't even listed on the website anymore.
Hey bro where did you get that winch plate
Where did you buy the winch? Please thank you.
Movaje? Really nice - well-explained video BUT - please, please, please, turn off the horrible wisteling music that repeats a five second interval hundreds of times. Very distracting, OK - I got that out of my system. Do you know if this kit will fit Gladiator Mojave?
How much does the bumper weigh?
Are you running 37"s with this bumper?
How much does it weigh
This guy looks familiar 😏
Getting famous off of comments day 173, so I can live the dream, live life to the fullest🤙🤙🚀
So I assume that wouldn't work with the Sport or Overland models since the fenders are lower compared to the Rubicons?
Correct 👍🏼
Does it will this work with a stock Gladiator MOJAVE?
I have it mounted on mine underneath the fender just a touch. Check the quadratec website for pics of it
I have a sport and it fits with mine, no modifications needed
Holy cow it’s $1100
cage nut
Intense music drowns the message🤔
Nice but $1100.00 out of my price range
...and now a few years later it's $1,381.00. INFLATION!
Hello,I am the manufancture of LED headlights and like your video. Would you be willing to test them? Please reply to me if interest.
Great video but the music is torturing. I’m trying to listen to you and it’s just lol it’s like a bad repetitive hold music.
Please stop saying Bondi! It’s pronounced BONDI!!
hahahaha