2021 Project M Topper | Four Wheel Campers
Vložit
- čas přidán 28. 08. 2024
- Four Wheel Campers is excited to share a video tour of our newest Four Wheel pop-up camper, what we like to call Project M. This Four Wheel Campers topper is different from what we have offered in the past.
Our other Four Wheel Campers models have been slide-in truck campers where the tailgate is removed, and the camper is slid into the bed of the truck. The Project M camper is a topper, which goes on top of the bed rails and is clamped or bolted down. The tailgate stays on and has a separate hatch.
The Project M truck topper is available in six different colors, as well as black diamond plate siding if you desire a more industrial custom camper shell look.
While the Project M topper in the video is shown on a full-size half-ton Chevy 1500, Project M toppers are available in several different sizes to accommodate truck beds, including:
5 Foot
5.5 Foot
6 Foot
6.5 Foot
8 Foot
Project M Topper Camper Features
The Project M camper features a standard window on the driver side, which also serves as an emergency escape hatch. The camper has outside GearTracs. You can get these on one side or both sides of the camper to attach Rotopax, Maxtrax, axes, shovels, board racks, etc.
There are six roof latches-two on each side of the camper and two in the front. There also are roof latches and jack brackets on each corner of the camper.
On the passenger side, you have a few options available. You can get a large or small window, a large or small utility hatch, or a solid side with no window.
On the rear exterior, flood lights are available as an option. The roof is a one-piece aluminum skin that you can get with vents, power fan, GearTracs, camper sport racks, and solar panel options.
Inside the Project M topper camper, you can get a power vent, an extra vent, and LED lights as options. If you choose the Pre-Wire for Power option, it includes four interior LED lights and pre-wiring for vent fans, solar, and battery connection.
In the soft pop-up portion of the camper, there are four built-in windows with privacy flaps secured into place with Velcro. A clear flap screen is behind that and is also secured with Velcro. Finally, there is a permanently built-in screen.
The cabover bed always comes with the topper. You can choose if you want our mattress or if you want to supply your own. If you order our mattress, you will have mattress options. To make the cabover bed into a full-size bed, simply pull the slider until it drops down and locks into place.
In the bottom front of the Project M topper is a large window that is standard for visibility and to help you see out the back of the camper when driving. Two interior shelves sit on the bed rails of the truck and are either bolted or clamped down.
Interior tracks are available as an option for hanging or tying down equipment. All Project M toppers include a fire extinguisher and smoke detector on the ceiling.
Another optional feature is the Thermal Pack. This is a cold-weather blanket that is attached to the Velcro strip along the tops of the soft fabric part of the pop-up part of the camper. The camper roof and all of the camper walls are foam insulated.
Additionally, several power solutions are available to supply power to the camper, which can also be connected to your truck, solar panel and battery setup, or 120V electrical outlet for recharging.
Setting Up the Project M Topper
Step 1: Start by releasing all six roof latches by going around the top of the pop-up camper. If your truck is lifted, you may need a step stool to reach the latches.
Step 2: Grab the two latches on the camper door, open it up, and drop the tailgate.
Step 3: Once you are inside the camper, it is a very simple process to lift the roof up. Gas struts are helping you from the outside while you push up on the roof. Simply push up on the back until it locks into place, then push up on the front until it locks into place.
Step 4: Remove the bungee cords from the soft sides. Store these someplace secure, as you will need to reattach them before bringing the top down.
For further information about Four Wheel Campers Project M and to learn more about the different options, please feel free to:
Email us at sales@fourwheelcampers.com
Visit our website at fourwheelcampe...
Call us at (530) 666-1442 - Auta a dopravní prostředky
I just got my Project M installed today! I can't wait to get out in the woods. Please tell everyone a HUGE thank you from me!
Happy Adventures!!!
This is one of the best designs out there, period. The added interior space and bed-width created from the sides sticking out beyond the bed rails, plus the 13” shelf that is created on the sides, put this canopy at the front of the pack for me. I know it’s not in the typical FWC style, but if y’all could make this in a clamshell design with a bed platform that pivots up like some of the competition out there, with the ability to keep the bedding in place when it’s all closed up, the Project M would be PERFECT. Thanks for the thorough walk-around.
I think this is the next evolution for my truck bed.
Finally picked out my options and put down my deposit today!!
This camper is worth every penny and the wait.
Stoked to have something that will hold its value over time .
Thanks Dan for all your help!!
Thank you Jason! Welcome to the FWC family!
For me (again for me) when comparing the various options that I want, paired with living in a very wet PNW and dusty summer roads, I'm saving up for the shell model. This model would be a bit too risky in terms of weather proofing, for me, around wear it sits on the truck bed.
I'm just not seeing 13k plus just to start
Aluminum isn't cheep. Windows, gas struts, etc. All under 400# (for the 6') and for $9300. I see it.
This is really cool.
Suggestion for better power: order lithium iron phosphate cells and a bms instead of those AGM batteries, much more cost effective and much better battery specs.
AGM are less expensive, enough power density for the job and most importantly aren't temperature sensitive. They can freeze. Which is what you want for an occasional use thing like this.
This was an awesome idea! Taking a camper shell to the next level. Great job!
Thank you!
@@FourWheelCampers If I got one I would not be sure how many options to add or maybe just get anything in stock rather than have to wait a long time for anything custom ordered. I guess I could just get the basic and add stuff myself. The stove heater combo is nice, Batteries would be a must as well.
@@FourWheelCampers I found out in stock is out of the question. Sigh.
@@angelogarciajr5356 Yes, all of our campers a typically built to order. With such high demand right now, our wait time is currently about 1 year.
@@FourWheelCampers Yup...found that out. I will keep an eye on used sales , but in the mean time I have made a nice bed in the back seat of my truck and keep my camping gear under a toneua cover in back. It is roughing it but at least I can go on over night photo adventures for this summer until I get something better.
I’m very close to buying one. Thanks for this thorough walk through.
Nice addition to the line up, making decision very hard, I’m impressed
Awesome! I just got mine in February!
Pretty slick, especially the black. Keep up the great work.
Thank you for your support! Have a great day!
I would love to see a demo of how you close this for the night (from the inside). Does one close the tailgate before or after climbing in? I’m 63 now and trying to imagine how I’ll do this at 73.
How you close up for the night depends on preference, there is no right way. We'll try to make a video soon.
A rear awning and annex house would be awesome! I noticed on your website no listing for Jeep Gladiator 5’ box? No plans?
I really like the design, but a base price of 9,000 makes it out of reach for most. A base model should start way below the 9,000 price
I like this design it was very nice. However I will have to find out if there are tailgates on a truck that can be locked. I'm thinking about inside of this sleeping, can a complete stranger walk up and just opened my tailgate while I'm lying to sleep
Many newer truck come equip with locking tailgates, if not, there may be aftermarket locks that can be added.
This makes me want a Gladiator over a Wrangler.
Is it reasonably priced ?, I’m sold if price is right
Really great job! I'd love one of these with the new dodge swing out tailgate!
Starting price is $9,300, ridiculous!!! 🤦🏼♂️🤦🏼♂️🤦🏼♂️
Its not 1998 anymore bud, Inflation and income stagnation take people by surprise. A house is 600k, a car is 40k, a coffee is 2.50, a small aluminum boat is 25k. I was middle class once too.
Hey I'm about to post my new Fat Away Diet Plan / dropped it off to get my Intellectual property patented / it's 3 steps X 3 Times Daily ... & 3 things to Eliminate / & it Actually Works..../ Just saying...
@@nomadchad8243 No lie. In my small northwest Washington city, a house averages $620k, up 20% in just the last year. If one can't afford something, that's unfortunate, but it doesn't make the price unreasonable.
I'm disappointed in the wait time...I understand the quality and build time but it definitely makes people consider other brands that offer more features as standard
How long is wait time for Toyota Tacoma model? I know it was long wait last year.
Hi - You can check in with our NC dealer (MLO) from our "Dealer" button on the top of our website but orders taken last week are installing DEC - MAR 2022
re: the two rear hatch latches . Is it possible that while you are sleeping inside the Topper ; someone outside could walk past the rear hatch and push on the two latches and lock you inside ? Also , when you go inside to sleep , do you have the ability to lock the rear hatch from inside for security purposes ?
Hi! Yes, the door you see in the video is able to open from the inside as well as lock from the inside. A key must be used to lock from the outside. Hope this helps.
@@FourWheelCampers Thank You
does it fits a toyota tacoma 2019 double cab SHORT BED(5')?
Looks awesome. I like the black version with solar. What’s the weight for the 6.5 bed? (Tundra).
About 400-500 lbs depending on options. Hope this helps!
New to this but this model is well within the payload capacity of the various trucks mentioned, correct ?
Average Project M weight is around 400-500bs, depends on the size of truck and camper options selected.
Can an air conditioner be added to the camper.
We do not offer an air conditioning option for the Project M, but we do have roof fans as an option. With 2 fans you can circulate the air to keep things fresh.
Would your camper fit and 4 door Ford ranger 2023?
Thanks for asking. It depends upon your bed length and camper type. Send us your truck brand/model/year/ and bed length to sales@fourwh.com and we can assist you.
I think this is the one I'm looking for. Any rental possibility?
At this time we do no have rentals. Check Outdoorsy as sometime our owners will rent them on there.
Are these sor of universal? Like would it fit a 1989 Toyota pickup with the extended cab?
In general the Project M is confirmed to fit most truck models 2000 and newer. We have not confirmed fit for older trucks.
Thanks Dan, if we put our deposit in now do we get the updated version with the struts inside the hatch and the updated door handles?
Thank you
We are still in testing phase for this update, but it should be finalized in the next few months. If you put an order in now, delivery will be about 1 yr out depending on where you are located, so you should be good on receiving the updated version. Hope this helps!
@@FourWheelCampers thank you
Nice
In the past it seemed as though there was no dedicated 6.5 foot model - is this new for 2021? Previously it was 6.0-6.5 foot which I assumed wasn't really fully utilizing 6.5 foot beds.
We have (12) different Project M sizes to fit most trucks very well. The complete fit guide is on our website in the "Topper" section. Thank you for your interest!
@@danwelty3826 Can it be locked from the inside? What is the shelf material that extends out from the truck bed rails made of and is there an option to get shelves that aren't as wide?
Awesome video. Very detailed which is what I needed. I am having a difficult time deciding on whether to buy a shell or a project M. Can you lock the project M from the inside for urban camping?
Hi Michael! Yes, it is possible to have the rear door/hatch locked while inside.
@@FourWheelCampers thank you.
How much?
Would you be able to fit a 4 wheel quad into this when it’s closed?
Don't think so!
Where can we purchase and look at these?
Thank you for your interest! Click on "Find Dealers" here www.fourwheelcampers.com
Curious if the door above the tailgate locks from the inside? Also, what material is the topper shelf that sits on the the bed rails made of and can you screw into the side of it?
Yes, it is possible to have the rear door/hatch locked while inside. The bed rail shelves are aluminum framed with honeycomb insulation, you can screw into the framing to attach items to the shelf.
@@FourWheelCampers so I understand. It can be physically locked from the inside or do you have to lock it with the key from the outside first?
@@Vendeevictores You apply locking on the outside, get in the camper, and close it shut. If you locked prior to getting inside it will be locked once inside. Then, there are two quick releases to unlock from inside. Hope this helps! Thank you!
@@danwelty3826 yes that is clear now. Thank you.
Is it true that the access hatch can only be installed on the passenger side? May want to consider a Velcro screen attachment as an option for the hatch doors.
I've got a 94 Dodge Dakota with the standard 6ft. bed. Will it fit??
The Project Ms will fit most trucks from 2000 and onward. Hope this helps!
💗
Honda ridgeline?
We do not make campers to fit the Honda Ridgeline.
I want one for my 96 Dodge Ram 8 foot bed but you guys just flat-out don't make them
How ridged are the soft sides in the wind? Do they flap making noise?
Hi! There will be wind noise from the vinyl and roof in high winds. The pop up portion is made of a rugged propylene woven vinyl.
@@FourWheelCampers thank you
One more question, do you plan on designing a version of the project M to fit the new for 2021 Honda Ridgeline?
@@greywolfe6805 At this time we do not.
Is the bed platform a two piece ?Can you removed the bed extension and sleep east to west on solo trips ?
Hi Jason, Yes the bed is 2 pieces and could be removed for solo trips, just depends how tall you are. Bed size in a mid-size truck is 81" X 66" and in a full size truck its 81" X 72". Hope this helps.
@@FourWheelCampers how wide is the remaining section of the platform once I remove the extension?
Also, if I have the bed extension extended can I still pop the roof up even though I’m farther back from the roof extension device?
I ask because I want to have all bedding in place
Thanks
I believe that it would be 48" instead of the 81". You could not leave the bed in an extended position as it would limit access to the front lift panel for popping the top up and down.
@@FourWheelCampers unless you hopped up onto the bed and pushed up
@@FourWheelCampers what is maximum thickness of mattress and bedding I could have in place if I removed the extension with top down? 7 inches?
Would the 5ft model work on a Jeep Gladiator?
We are working on potential solutions for the Jeep Gladiators. Stay tuned...
Is this coming to Europe aswell?
We have a dealer in Germany! Feel free to reach out to them. wohnkabinencenter.de/
Gladiator?
Hi! We hope to have a "Project M" product for the Gladiator by Fall. We have info on it on our website Project M section. Take care!
What is the weight capacity of the bed??
Hi and thank you your interest! 400lbs (two people) has been tested. We have not tested anything beyond that in long term but we expect to be at least 450lbs.
@@danwelty3826 Hey if you want me to try one out on my Tundra Crewmax and feature it on my channel I'll test it with more weight than that! lol
Really cool product, but due to your wait times, why wouldn't you focus on throughput and not introducing more... not to mention price...
Hi and thank you for your interest. Those focusing on videos are different from those focusing on throughput. Have a great Thursday!
10,000 dollars for a topper!
So what does this bare bones shell cost?
Starts at $9,295 with several optional upgrades. Check our website for more information. fourwheelcampers.com/model/project-m/
What’s the current lead time?
It depends where you're located, but generally about 1 year as it stands. Where are you located?
@@FourWheelCampers holy cow! I’m in Central Florida. Orlando area
@@retiredbiker We know! Its a long wait. Your closest dealer will be Main Line Overland in Charlotte, NC. www.mainlineoverland.com/pages/contact-us
WHY does EVERYONE have to talk in Upspeak!!??
Please nerf wolf and meta knight, way too op in the meta
Can a 270 awning work with this?
Thank you for your interest! No, the 270 degree awning will not work but we do have an ARD awning that works well.
@@danwelty3826 is it true that you can only get the large window or hatch on the passenger side with a 6’ box?
I built one.......
Can you sponsor me on my trip?
Free digital marketing and social media images?