Skim Coating For A PERFECT Ceiling!
Vložit
- čas přidán 15. 10. 2021
- Skim coating for a perfect ceiling is what I'm doing in today's video. I'll tell you why I skim coat a textured ceiling after repairs and I'll show you how to skim coat a ceiling! This is one of the craziest drywall ceiling that I ever had to repair! I've never seen drywall tape and joint compound blister like this before. Have you ever seen a drywall ceiling do this? Where ever the drywall finishing was at the joints. The drywall tape and joint compound are bubbling really bad. What's weird is the rest of the ceiling is fine. Just the tape joints are failing... Let me know in the comments what you think is going on? . Thanks so much for watching and commenting! I truly appreciate each and every one of you. -Paul
(Part 1) CRAZIEST Drywall Ceiling That I Ever Had To Repair!!!
• CRAZIEST Drywall Ceili...
Here's another Great video:
How To Repair WATER DAMAGED DRYWALL CEILING- Step by Step
• How To Repair WATER DA...
Watch this one next!
How To Skim Coat Your Ugly Ceiling With a PAINT ROLLER!
• How To Skim Coat Your ...
🔴SUBSCRIBE for more useful Drywall Tips!
Here 👉 / @paulpeck
☑️ Also, here's a link to my Drywall and Painting Shop on Amazon where I have each and every tool and product I've used in this and all of my videos: ▶ www.amazon.com/shop/paulpeck (These links are my Amazon Influencer store links where I do earn a small commission if you make a purchase at no additional cost to you).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you're new to the channel welcome! My name is Paul and I've been a drywall and painting contractor for over 20 years. I'll be sharing tips, tricks and how to videos for all of your drywall, texturing and painting needs.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hello everyone, I just enabled the Membership feature on my channel!
Please consider becoming a member of the DRYWALL CREW!
Check out these membership perks:
/ @paulpeck
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How To Skim Coat Playlist:
• How to Skim Coat
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Here's all the videos from a water damaged ceiling repair series*
NO MORE CRACKS On Your Ceiling Repairs Playlist!
• NO MORE CRACKS On Your...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Skim Coating GAME CHANGER for Drywall finishers and DIY Drywall!
• Skim Coating GAME CHAN...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
** More Helpful Videos Down Below **
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FibaFuse Drywall Tape:
• Fibafuse drywall tape
Here's a Water Damage Repair Video Series where I show you how to access and dig into the water damage drywall ceiling and a water blistered wall: • Water damaged ceiling ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Skim coating walls for beginners tutorial
• Skim coating walls for...
Never seen before skim coating tips and tricks to skim walls yourself • Never seen before skim...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Easiest way to repair knockdown texture on a wall patch ever!
• Easiest way to repair ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I was mad and punched the wall! How to repair hole in wall tutorial • I was mad and punched ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 2- How to Skim Coat Walls Demonstration
• How to Skim Coat Drywall
Part 3
What to do after skim coat dries? No sanding!
• What to do after skim ...
Part 4
How to touch up a skim coat before sanding skim coated walls • How to touch up a skim...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 5
How to sand a skim coat fast and easy!
• How to sand a skim coa...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to skim coat using paint roller trick- Getting rid of Knockdown Texture- • How to skim coat using...
*(Part 2) How to skim coat trick with a paint roller and joint compound- • Video
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Crack Repair Videos:
How to Repair a Ceiling Crack- Diy Drywall Repair Tips and Tricks
• How to Repair a Ceilin...
How to easily fix drywall cracks on walls and ceilings!
• How to easily fix dryw...
How to repair a cracked drywall ceiling trick! Foot through Attic Drywall Ceiling Easy Fix! • How to repair a cracke...
How to Actually Repair Drywall Tape Joints on a Ceiling!
• How to Actually Repair...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My Facebook Drywall Help Group
/ drywalltexturinghelp
Instagram
/ peckdrywallpainting
Twitter
/ peckdrywall
TikTok
vm.tiktok.com/ZMJa3opKJ/
#PaulPeck #DrywallTube - Jak na to + styl
Here’s Part 1 of this Crazy Ceiling Repair: czcams.com/video/_SGhxCvNStA/video.html
I got a quick question... Have you done a vid on jow to fix drywall hung wrong. My homes ceiling drywall was put up with liquid nails and four nails at each corner. I discovered this when a portion fell because the nails gave. Can i just screw it in or do i need to replace. The bown in insulation is bowing the panels away from the beams
This was interesting to watch. You are very knowledgeable!
I’m going to attempt to skim coat the textured ceiling in my small half bath. Doing a bunch of research first so I’m glad I found your channel!
thanks for the awesome video!
It’s definitely a moisture issue. Especially here in Florida. One thing I noticed and I would have done from the beginning. If I was going to use drywall for a patio are. First, For the record, I’ve never used drywall for a patio area. I’ve always pulled it down and use cedar or aluminum soffit. Now back to my “maybe” mistake that the original contractor did. I would have used moisture resistant drywall. Not regular drywall. And yes I would have use fiberglass tape. Because once again it’s a moisture issue. And paper and moisture don’t mix well together.
I was about to say the same thing...
Paul, I agree, the humidity levels are so high down here in S. Florida this installation may have been doomed from the start, and humidity can almost make the drywall mud reflow. Heck when people try o roll paint over popcorn ceilings, the popcorn comes tight off from lack of primer. Do you think maybe they failed to prime the drywall after tape and mudding? I think if they prime with a good quality primer and put good quality topcoat paint, then humidity should not be able to get through to the drywall and make the tape delam. In one of my videos from last year, we found extensive bubbling of paint interior on my friend's walls and went the paint peels so easily off the drywall, it's a sure sign they never primed the walls first. I had to scrape, sand, skim, prime, repaint to fix it.
👍🏻🍻🍺👍🏻
You make it look so easy.
Lots of practice Linda…😇 Thanks so much for watching and commenting my friend. 👍🏻 -Paul
Keep the video coming and stay safe out there and have a good day
Oh you know I will Tammy! Thanks so much for watching and commenting.😎 -Paul
@@PaulPeck you are welcome
Use pva primer as a bonding agent for adhesion.
Hi Paul, any videos or tips on skim coating a concrete slab that was given an acoustic ceiling during building? Not sure how to skim it...
Looks good sir
I appreciate that Pete!💥👊🏻😎
Thanks for the video
Right on Charles.💥👊🏻 Thanks so much for watching and commenting my friend!😎 -Paul
My aunt has a poolside veranda like that. They attached chickenwire to the ceiling before going over it with mud or plaster or whatever they used. Three years later, the wire rusted thru and the whole thing fell off.
Same thing happened in my garage. The former owner vented the dryer in the garage and being in Arizona, I had the same problem.
Yes, and then pull a hot car into that garage and it’s like an oven cooking the drywall… Thanks so much for watching and commenting my friend.👍🏻😎 -Paul
Good video
Thank you CW! 🤙🏼😎
I scraped popcorn ceilings off . Do I have to prime ceilings before skim coating?
How do I get the skim coat to be as rock hard as skim coats from the 50’s. That drywall (5/8”) and skim coat (maybe the combo) seems impervious to water. This is being done as a repair inside the house if that make a difference. That old drywall behind the skin coat looks like brick motar( grout).
You’re right bro that is a good option for the customers but also what people need to understand is that you can make more money doing skim coating instead of matching a texture
Rogello, They know exactly what each options costs are. Because I always give my potential customers a written estimate.👍🏻 And honestly it would be a lot easier just to go ahead and match the texture because skim coating and re-texturing takes a lot more work. So of course it would cost more money because it’s a lot more time to complete. Thanks so much for watching and commenting bro.💥👊🏻😎 -Paul
Nice
Thank you!😎
I used to be in florida drywall doesn't stand up to the heat and humidity...I would tell people to spend the money on aluminum or a more weather resistant material
No undercoat, or not backrolled
I was 50-50 on it by skim coated the entire rec room at the church because I knew that later the ladies would see everything LOL!
Are there 2 different sides to a drywall knive?
Yes. On most knives there is two sides Terry.👍🏻 I did a video on this:
👉🏻 czcams.com/video/MKdlKgSjwJk/video.html -Paul
Just curious. Why is there so much textured drywall? Here in Chicago we don't have much of that
Because drywall texture is a regional thing. I can tell you that the south and California are very inclined to have texture. I hope this helps. Thanks so much for watching and commenting my friend.💥👊🏻😎 -Paul
Because in Chicago y'all have to repair so many bullet holes , it just saves time if you don't also have to texture , plus when chicago pizza sauce squirts on the wall it cleans off a slick wall easier ..... that's why
I always prime my work before I do a knock down just to have a longer flash time. I think they used cheap paint and mix that with humidity= disaster lol. Great work man.!
i personaly think that a cowboy did it , but now my man peck is on the job we all know that it wont happen again , it also could be aliens , but that was a disaster in the beginning , and looks pro now man you is the master, Question , what did you have for dinner
You know it will be perfect Neil!🙌🏼 BBQ ribs and a cold beer is what was for dinner. 🍻😎
When everything comes off in sheets like that, it's usually moisture
Florida sun will bake anything. Nothing can take it for long
The rust on the screw heads is the giveaway that it's a moisture problem, but I've never seen mud release from sheetrock like that without a trace. I've had tape pull loose using hot mud, but I believe it was operator error on my part by using it when it was setting up in my pan before finishing.
Possibly. I did touch on this in Part 1: czcams.com/video/_SGhxCvNStA/video.html Let me know what you think. -Paul
Make sure to watch the whole thing 🔥 You won't be disappointed 🎬
Scully knows where it’s at!🔥 Thanks so much for watching and commenting my brother!🤙🏼😎 -Paul
👍🏻🍻🍺👍🏻
Are you near the villages???
I’m about 3 hours South on the East coast. 🏄♂️🤙🏼😎
👍👍👍
💥👍🏻😎
It looks like what is happening in my porch area.
😎🛠️😎🛠️😎
💥👊🏻😎💥👊🏻😎
why all purpose? why not plus 3 or something?
Because I’m skim coating over a painted surface. So the best adhesion is with the all purpose joint compound since it has more glue in it then those other formulas.👍🏻 -Paul
@@PaulPeck That was something I have been weighing on , all purpose better adhesion , lightweight better finishing .... decisions decisions ..... and I feel adhesion is VERY important , but damn that lightweight sure floats out better , much better .... why can't someone invent the best of both worlds for mud ????
That should have all been vynl sofit or aluninum , i would have ripped all that drywall out or put wood siding over it then alum or vynly especially in florida by a swimming pool
👍🏽👍🏽
💥👊🏻😎
Secret, add a touch of dish liquid to yer compound.
Uneven seams, they didn't use there knife to balance the mud out. Where as if you did what I just said you would never noticed it
I’ll say that both issues , humidity and no primer
Seems to me it’s painted with semi gloss with no primer
definitely a paint issue , however the mud pulled off easily too so that's moisture from above seeping through , but yes , I was even thinking maybe it was OIL paint !!!! sure acted like it , but I think just cheap ole builder semigloss , shoulda primed first or used a high quality flat or satin .... probably still prime it first because that's exactly how paint acts on unprimed wood , just "won't soak in and bond" it pulls away when it dries , the raw wood or raw drywall sucks all the water out of the paint too fast , doesn't bond , then a semigloss is going to harden and tighten up compounding the problem