EASY - WJ Rear 4 Link from Iron Rock Off Road!

Sdílet
Vložit
  • čas přidán 4. 09. 2018
  • Our exclusive bolt on long arm design is now available with 4-Link Rear long arms for your WJ as an upgrade to your existing lift kit. In addition to the new long arms, you'll get a new subframe and top mounting axle bracket which will be used to eliminate the need for your A-arm. This is a fully adjustable double triangulated kit that will correct your rear suspension geometry without the use of a spacer. Just like our popular front Rock-Link long arms, you'll have the ability to install this kit with NO welding, cutting or grinding at all! You'll only drill holes for the BOLT ON subframe that is brake formed from 1/4" and 3/8" steel plate.
    This upgrade will allow as much articulation as your rear shocks have for travel range! We use a high quality greaseable, pivoting flex joint on the axle side for great flexibility and factory style rubber bushings on the chassis end to absorb road "noise." The new adjustable arms do away with the inferior ball joint on top of your rear axle as well as the chassis bushings and replaces it with our fully rebuildable flex end that is not only much stronger, but also allows more articulation. Oh yes, you will need coil spring retainers for the rear now too! They are also included in the kit.
    www.ironrockoffroad.com/produ...
  • Auta a dopravní prostředky

Komentáře • 47

  • @Starlite123
    @Starlite123 Před 4 lety +2

    I love my ZJ on the 7 inch long arm kit.

  • @767dag
    @767dag Před 3 lety +3

    Nice build , I got stop watching these vids ... had a 08 Cherokee inspection in Houston for the sole purpose of doing this .... may to much time on my hands ... these guys seem great

  • @hewlett260
    @hewlett260 Před 5 lety +3

    Can't wait to add this and the Pro Rock 3 link to my WJ.

    • @dougyankunas3104
      @dougyankunas3104 Před 5 lety

      I have the front 3 link. I’m sitting at 4.5 lift with 32’s . Feels more stable than the short arm I had , however, the ride is the same as my short arm when it comes to vibrations from bumps. I suspect it’s because my short arm has rubber bushings at all ends , while these only have rubber at the axle end.

    • @hewlett260
      @hewlett260 Před 5 lety

      I have their adjustable short arms and 3" lift. Going to 4.5" when I put the long arms in. Just waiting for my sye and front yoke and full length frame stiffeners to be installed. Glad to hear the 3-link is stable at that height.

    • @team_suv7778
      @team_suv7778 Před 4 lety

      I wish I could afford to put long arms on mine lol I’m on core 4x4 short arms at 4 inches of lift on 33s

  • @charliedee9276
    @charliedee9276 Před 5 lety +1

    On your website for this product the picture shows it installed on a WJ with what looks to be a 9" Ford style rear axle. Please tell us about that.

  • @SpiralDesignWorks
    @SpiralDesignWorks Před 5 lety +1

    I am surprised you put the rubber bushings on the lower arms on the axle side. I would have thought the ball joint ends went axle side, rubber bushing frame side?

  • @dereckbauer2613
    @dereckbauer2613 Před 5 lety +2

    Dumb question, why not hit the factory lower mounts with a cut-off wheel or even a plasma cutter & get it out of the way all together?

  • @xmo552
    @xmo552 Před 4 lety +1

    Eyeball the crossmember. Nice. I would edit that out. And, provide a hard point of reference.
    👍😉👌

  • @superkillr
    @superkillr Před 3 lety +3

    I couldn't figure out why this guy seemed familiar.. then it hit me. It's Dana White teaching me how to install a lift.

  • @robgoffroad
    @robgoffroad Před 3 lety +3

    What size tires are on it right now? They fit in the rear wheel wells perfectly when it was fully flexed.

    • @IronRockOffRoad
      @IronRockOffRoad  Před 3 měsíci

      @robgoffroad Those are 285/70-17 BFG Mud Terrains

  • @carlosdumois4526
    @carlosdumois4526 Před 5 lety

    Whats the tire size for that WJ???

  • @AlY-jv2ew
    @AlY-jv2ew Před 5 lety +3

    Pls explain what this upgrade is for? function/ applications? benefits etc

    • @yerwrng
      @yerwrng Před 4 lety +12

      With a set of long arms it's easier to reach things that are up high on the shelves at the market and if you get into a fight it gives you reach on the other guy ... I hope this has given you insight on the benefits of long arms .

    • @xmo552
      @xmo552 Před 3 lety

      @@yerwrng
      Boxing. Duh.

  • @natewj1587
    @natewj1587 Před 5 lety

    So to get side to side measurement adjust your uppers but thought upper is for pinion angle

    • @IronRockOffRoad
      @IronRockOffRoad  Před 5 lety

      Adjust uppers independently for side to side, and together for pinion angle.

    • @natewj1587
      @natewj1587 Před 5 lety

      @@IronRockOffRoad ok so if I need to go to passenger side adjust which top arm passenger or driver side

  • @malcolmrudd3630
    @malcolmrudd3630 Před 3 lety

    How do you tell if you have WJ or a WK. I have a 2007 Jeep Cherokee Laredo 3.7, 4 X 4?

    • @IronRockOffRoad
      @IronRockOffRoad  Před 3 lety

      WJ Grand cherokee's last year was 2004. Your Grand would be a WK

  • @spencersuggs8676
    @spencersuggs8676 Před 3 lety

    So what becomes of your exhaust? I have a magnaflow that I’m not partial to losing.

    • @IronRockOffRoad
      @IronRockOffRoad  Před 3 lety

      We offer a 4-link exhaust kit for the WJs! Check it out at ironrockoffroad.com!

    • @immelting9834
      @immelting9834 Před 2 lety

      Build your own. I have this kit , bought the exhaust , after 3 months I tossed the exhaust. Honestly, your better off building your own . You can fit a Borla stainless muffler between the front and back cross members from the long arm kit with room to spare. You will need to cut off and toss your 3rd cat tho , that is where the Borla muffler will now go. Make sure you get a offset exit on the muffler. That is the only way this works. The exit lines up perfect next to the side of the back cross member. From there , you can route your exhaust. Or as an alternative you can connect a 12 in long turn down exhaust tip. This tip ends up right at the back and next to the cross member. Once that is in place , you can drill 2 small holes and add an exhaust hanger to the cross member. World of a difference and man oh man that Borla sounds amazing.

  • @santiagohernandez..
    @santiagohernandez.. Před 3 lety

    So you can put the exhaust back in it’s original place because it’ll hit?

    • @IronRockOffRoad
      @IronRockOffRoad  Před 3 lety

      The original exhaust cannot be used because it will contact the 4-link setup.

  • @r.weaver3769
    @r.weaver3769 Před 4 lety +2

    You have to have a lift to do this job...But it helps.

  • @chelseahartshorn3509
    @chelseahartshorn3509 Před 5 lety +1

    Are there any coupon codes at the moment, preferably the 10% off?

  • @gorillagrip27
    @gorillagrip27 Před 3 lety +1

    What size tires are those

  • @AlY-jv2ew
    @AlY-jv2ew Před 5 lety

    what diesel you'd recommend for WJ swap?

    • @natewj1587
      @natewj1587 Před 5 lety +2

      4bt or 6bt

    • @xmo552
      @xmo552 Před 4 lety

      6bt is way too big and too heavy.
      4bt maybe, idk.
      I've been seeing VW alh
      And
      Benz om617
      Being swapped into jeeps lately.

  • @christopherduby5330
    @christopherduby5330 Před 2 lety

    Looks like from the comments everybody is their own certified technicians .. good for you all take what u need and leave the rest unless u have a question . Jesus . Tried to look in comments for some good tips and found a bunch of trolling b.s

    • @IronRockOffRoad
      @IronRockOffRoad  Před 3 měsíci

      @christopherduby5330 Don't feed the trolls! Give us a call if you have any questions, you'll talk to a real person! 952-210-7185

  • @matthewhodges460
    @matthewhodges460 Před 3 lety +1

    I got a 2wd 03 4.0, it’s been a loyal pos so I’ll keep putting $ in her and she’ll eventually be a 4wd 03 4.0 loyal pos🤷🏽‍♂️

  • @team_suv7778
    @team_suv7778 Před 4 lety +2

    Send me this kit and the 3 link front and let me do an off-road review on it on my channel