Polaris Indy Suspension Swap part 1

Sdílet
Vložit

Komentáře • 22

  • @YourpainRx
    @YourpainRx Před 4 lety +2

    Learn something new every day!!! Thank you so much!

  • @birdbreaker
    @birdbreaker Před 9 lety +7

    BASICALLY, how does it handle?

  • @georgeprescott3870
    @georgeprescott3870 Před 3 lety +3

    What did you put for a suspension in the Yamaha

  • @ganjafarmer6595
    @ganjafarmer6595 Před 6 lety +4

    BASICALLY

  • @gregofficer3051
    @gregofficer3051 Před 7 lety

    do u happen to know mounting points for 97 vmax suspension. want to mount it on 88 srv

  • @danielpomeroy
    @danielpomeroy Před 9 měsíci

    Wondering if a M10 would fit? Polaris bought the right to use that skid for a few years. Don't remember what years.

  • @ekrumenauer
    @ekrumenauer Před 8 lety

    you wouldn't happen to have the dimensions of the reinforcement plates you made would you?

  • @DocHollidayYZ
    @DocHollidayYZ Před 8 lety

    what rivets and riveter did you use?

  • @minnesota4169
    @minnesota4169 Před 5 lety

    I have the same sled but it's a 91, great sled but the tunnel rides on the ground.

  • @mikeyhaller3361
    @mikeyhaller3361 Před 4 lety

    Can you put an extra 12 under the same sled

    • @jesseserfling6807
      @jesseserfling6807 Před 4 lety +1

      Yes but an extra 10 is way nicer ride the extra 12 is rougher and makes the sled tippy aswepp as the edge skid they get very tippy but smooth. If u run the edge skid you need to add like 10 inches to the width of the skis

    • @YourpainRx
      @YourpainRx Před 4 lety

      jesse serfling So the longer you get on the skid, the wider on the wider the skis?

    • @jesseserfling6807
      @jesseserfling6807 Před 4 lety +1

      @@YourpainRx extra 10 needs no front modification if you want the extra 12 the front needs to be wider as it becomes tippy. If you go with the edge 14 inch suspension you almost have to build a custom front suspension as you will be nose diving into snow and extremely tippy. So yes for the most part taller in the back needs wider in the front

    • @YourpainRx
      @YourpainRx Před 4 lety

      jesse serfling Thank you so much! I am new into this and yes the more i read the more i learn. Only took one time to ride a sled to get hooked!!! Thanks again!!

  • @mountaincat2001
    @mountaincat2001 Před 2 lety +1

    Go michigan.

  • @cfred841
    @cfred841 Před 9 lety

    Would that work in 97 xlt