Beautiful man! You are so creative I love the 3d printed parts and the way you put whole chunk of battery pack is looks so compact and fit well. Cheers!
Nice setup! Bike looks awesome! Ive printed the number plate to hide the wiring and brake cables. Great work man. Have the battery cover printing now. Running the 2 of 3 now. 1st part came out flawless
What an impressive new way to keep the wiring organized! The 3D printed cutouts covers for the steel frame is a business model itself. 🙌🏽 To the followers who have built this enduro Ebike using this Steel frame or the Aluminum alloy/Carbon frame its fun and very time consuming especially waiting on the parts. However, This build by far is amazing and I’m sure there’s a lot more out there were Enduro Ebike builders didn’t post their builds because it’s too much work and filming could be just another nightmare.
THIS IS THE BEST EVER REPRESENTATION OF WHAT THIS BIKE REALLY IS. IM SO GLAD YOU POSTED THIS FRICKIN VIDEO... IM MOTIVATED TO DO THE SAME WHEN MINE ARRIVES IN 2 MONTHS🤗🤗😎😎😎😎 I have an 5kw setup right now 8.7kw peak with street tires. I needed another bike but with DIRT BIKE TIRES... I KNOW IM GOING TO LOVE IT... I'm going to self install 72v 300a Bluetooth BMS when it arrives👍🏿😎😎😎😎
The launch on at like the :40sec mark was impressive. I have always thought Hub motors lacked torque but this one seems to get up and go! How is it at claiming hills at lower speeds and stuff? Love the video's by the way thanks for sharing.
well the QS273 is pretty much the largest hub motor you can fit on a "bicycle", what you said aplies for smaller motors, 5KW and up (QS205 & 273) have plenty of torque, depending on the kw rating/how many turns it has, 5T 4T 3,5T etc higher T = more torque less top speed.
very nice, this is definitely the future of motocross. can you imagine going to a stadium motocross race and not hearing or not smelling the exhaust of a motor cycle. it would be like watching a rc car race.
I ride Zero for already 5 years. When shredding Moscow city no bike can stand against it for anything longer 5 minutes trip. It goes 120. Silently. Most surprised people are those who are standing at bus stops. For them I’m really a silent spaceship)
@@evgenyurupin8729 XD u have a limited edition 200kw zero or something? "I have Aprilia and Kawasaki" WHAT Aprilia and WHAT Kawasaki? Sure an Sx50 or a ninja 350 won't have a chance but larger bikes simply accelerate much faster and are much more nimble than an electric. Even a 450 smoto will be able to keep up due to good acceleration.
Awesome wiring job! I've got the same bike on the way but with the sabvoton 200a controller. That wiring is amazing. Where did you get that big yellow connector? Do you have a quick disconnect from the Hub motor for when you have to change the tire on the back?
@@dszgarage357 One more question. How does that little DNM shock handle that heavy hub motor? I was thinking of fabricating a larger and reinforced shock bracket higher up so that I could mount a 12" moto shock with a 1200lb spring. Do you feel that would help this bike out?
@@dszgarage357 Великолепно сделал, сам хочу нечто подобное сделать, ищу мотор, с контроллером, так как рама есть, колеса есть, батерею сделать могу, аккумуляторы на Али полно, а вот хороших двигателей мало. и синусный контроллер, так как не на синусных есть проблемы по форумам пишут. Если подскажешь где брал буду благодарен. Еще и с тормозными дисками помочь бы.
@@user-xo2yn4cg5ssorry i don't speak russian and when i copy it into google translate,it just gives me some random sentences in my language without any meaning, could you please write your comment again in english?
Hay. Love your work. Very nice. I am building same bike. working on the battery. Can you tell me what size (ahm) fuse you are using. Thanks keep up you great work.
Really nice ebike mate. Can I ask what windings you have on your motor? Am I right in saying a 2T motor is the high torque (lower speed) end and 5T and 6T is lower torque but higher speed? I am about to buy an ebike with 12000w battery and a QS273 motor with 21 in wheels, and a 49Ah battery, the default winding on that is 2.5T but I can get it customized. I want good torque and high speed. What xT makes that possible?
I love it. Looking at yours, I want to make one of my own. A few questions though: The QS273 looks like a 4k/8k watt motor. What is 12.5 kw referring to on your bike? Thank you!
"4kw" or "8kw" thats the nominal power a motor can handle constantly without heating up QS motors are usually way underrated, a QS273 can easily handle 15KW and modified 20-30KW peak power.
Hello! Awesome build. Can I ask which 273 motor you're using, specifically if you're using a model with 200mm dropouts? I can't seem to find 200mm width swing arms anywhere online and all enduro frames come with between 120 - 155mm drop outs. Thanks!
Hey, I have no website and I'm not planning to do something like that. Just look for a similar bike on Alieexpress and change some parts and you will have a "nearly" identical bike.... Or buy all the parts you want and assemble it yourself.
hey did you make that battery yourself? or did you buy it somewhere. Looking to get the same battery pack for my build. Awesome build btw looks fast as hell! Thanks!
Hello your enduro ebike videos have motivated me to put together a beast like that, but I have several doubts about the configuration of the controller because I have no idea if it is only installed and already or I suppose that you have to do several configs, to improve performance if you can help me please
You need to adjust the standard controller settings to your own bike.... throttle settings, max amps your bike can handle and so on.... I don't have the time to make a detailed config for your bike, but if you have any questions, feel free to ask and I will answer when I have some time
One question, why such an excess of power? Efficiency is low, there is a great chance to roll the axis, and of course the higher the speed, the closer to God)
Wouldn't make a difference. As long as the battery doesn't deliver more amps or voltage you wouldn't get more power out of it if you only upgrade the controller
Nice build, & Very Fast, I have the same frame. If you don't mind what's your battery measurements with everything inside? Thanks again for the helpful content 💯
Usually I ride without my phone as display, it's just a GPS app to show the speed. I open the MQCON app to see the battery voltage.. I don't really need a display that shows me the battery percentage, because I ride less than 1 hour most of the times.
DSZ garage cool, is that why you have the controller shunt? Man, 3D printed ducting is awesome. I found some roof soffit in my workshop I’m using. can’t believe how massive your battery is!! Also have you put a fuse box in there?
@@streetleathal what do you mean with "is that why you have the controller shunt?" 🤔... Yes its pretty big 20s11p with bms - housed in a 3mm abs box. I only run a anl fuse 2:35 .
This bike is not for downhill, way to heavy, it would be almost like riding a motocross on a tight downhill pass for bikes. But it's a beast for uphill.
@@dszgarage357 ohh yeah I know it would be bad and awkward at downhill, i just meant i want to know if it can handle the frame stresses, sometimes I ride over very rough rocks and i'm scared the rear swing arm/suspension joins will fail
The bike is build massively and should be able to take some load (also depending on your suspension). But the Qs273 hub motor is pretty heavy and will drag the bike down, better would be a qs205 or a middrive.
Beautiful man! You are so creative I love the 3d printed parts and the way you put whole chunk of battery pack is looks so compact and fit well. Cheers!
Nice setup! Bike looks awesome! Ive printed the number plate to hide the wiring and brake cables. Great work man. Have the battery cover printing now. Running the 2 of 3 now. 1st part came out flawless
Sick. Just sick. Great build! Clean shop! Just wow! :)
This has got to be the best E-bike build I have seen so far!
Thanks,
there are definitely some better builds out there with more than double the power of mine.
Получилось просто великолепно!
NO WORDS...PURE PERFECTION...THE PROJECT ...THE VIDEO ..THE MUSIC..!!!
What an impressive new way to keep the wiring organized! The 3D printed cutouts covers for the steel frame is a business model itself. 🙌🏽 To the followers who have built this enduro Ebike using this Steel frame or the Aluminum alloy/Carbon frame its fun and very time consuming especially waiting on the parts. However, This build by far is amazing and I’m sure there’s a lot more out there were Enduro Ebike builders didn’t post their builds because it’s too much work and filming could be just another nightmare.
Yeah, it really is a pain to film the build process and it will take at least 3 times as long
8
F,
I want this guy's garage. Damn son 🔥🔥🔥
Amazing job mate....congrats! and big thanks for sharing!!
Ahh very nice time to start printing those battery covers thank you very much for your hard work and generosity
Beautiful little beast!
This is exactly what i'm looking to do! Awesome work dsz!! Subscribed
Nice electro pushbike.Good job inside box.
THIS IS THE BEST EVER REPRESENTATION OF WHAT THIS BIKE REALLY IS. IM SO GLAD YOU POSTED THIS FRICKIN VIDEO...
IM MOTIVATED TO DO THE SAME WHEN MINE ARRIVES IN 2 MONTHS🤗🤗😎😎😎😎
I have an 5kw setup right now 8.7kw peak with street tires. I needed another bike but with DIRT BIKE TIRES... I KNOW IM GOING TO LOVE IT...
I'm going to self install 72v 300a Bluetooth BMS when it arrives👍🏿😎😎😎😎
So fresh so clean ! This is my inspiration!
DOPE EDITING!!!
That intro was sick.
Thanks👍
Awesome bike and amazing editing! Looks very similar to our bike, we can get up to 65mph!
Fastest e bike ko I have seen ever love it man ❤️❤️❤️❤️
The launch on at like the :40sec mark was impressive. I have always thought Hub motors lacked torque but this one seems to get up and go! How is it at claiming hills at lower speeds and stuff? Love the video's by the way thanks for sharing.
well the QS273 is pretty much the largest hub motor you can fit on a "bicycle", what you said aplies for smaller motors, 5KW and up (QS205 & 273) have plenty of torque, depending on the kw rating/how many turns it has, 5T 4T 3,5T etc higher T = more torque less top speed.
Wow my friend that is one sweet bike !!
What a perfect fit with that battery, very satisfying to my ocd!
Did you build the battery yourself?
Boss: can you quickly come back to the office?
Me: I'll be back in 20min.
Boss: I'll give you 10...
Me: will be there in 5... wwssssiiiii
Amazing build, love it.
Cool bike. Is there any space for the 72200 controller in the tank?
nice video please could you say what make the rear hydraulic brake is thank you and did you need a spacer behind the rotor/disk
Magura 32, yes I had to install some spacers
Where did you get the bike frame? Love the video as well great editing as well as great shots thanks for the upload!
can you enter the thickness of your spokes in 273?
very nice, this is definitely the future of motocross. can you imagine going to a stadium motocross race and not hearing or not smelling the exhaust of a motor cycle. it would be like watching a rc car race.
0:41 Nice run !!!
Imagine a silent motorcycle passing by at 100 km/h
lol 100kmh that's cute.
I ride Zero for already 5 years. When shredding Moscow city no bike can stand against it for anything longer 5 minutes trip. It goes 120. Silently. Most surprised people are those who are standing at bus stops. For them I’m really a silent spaceship)
@@evgenyurupin8729 lol any 600cc motorbike would run circles around a zero. The only fast electric on the market is lightning
@@numbdigger9552 lol, I have Zero, Aprilia and Kawasaki. I know how they go. Not even a chance to any liter get zero in a crowded city like Moscow.
@@evgenyurupin8729 XD u have a limited edition 200kw zero or something?
"I have Aprilia and Kawasaki" WHAT Aprilia and WHAT Kawasaki? Sure an Sx50 or a ninja 350 won't have a chance but larger bikes simply accelerate much faster and are much more nimble than an electric. Even a 450 smoto will be able to keep up due to good acceleration.
Awesome wiring job! I've got the same bike on the way but with the sabvoton 200a controller. That wiring is amazing. Where did you get that big yellow connector? Do you have a quick disconnect from the Hub motor for when you have to change the tire on the back?
Thanks, search for terminal block generator in Alieexpress. No I have no quick disconnect for my motor.
@@dszgarage357 One more question. How does that little DNM shock handle that heavy hub motor? I was thinking of fabricating a larger and reinforced shock bracket higher up so that I could mount a 12" moto shock with a 1200lb spring. Do you feel that would help this bike out?
How did you solve the problem of connecting via bluetooth with the mqcon application? because I have to unplug the white plug every time.
очень аккуратно сделано! заслуживает уважения
Спасибо 👍
@@dszgarage357 Великолепно сделал, сам хочу нечто подобное сделать, ищу мотор, с контроллером, так как рама есть, колеса есть, батерею сделать могу, аккумуляторы на Али полно, а вот хороших двигателей мало. и синусный контроллер, так как не на синусных есть проблемы по форумам пишут. Если подскажешь где брал буду благодарен. Еще и с тормозными дисками помочь бы.
@@user-xo2yn4cg5ssorry i don't speak russian and when i copy it into google translate,it just gives me some random sentences in my language without any meaning, could you please write your comment again in english?
How do you fit 12.5 kw on that bike i can only fit a 4kw batt on it and i have the controller outside?
Amazing electric bicycle👍
what's the range per charge?
hi, your battery is 72V or 84V? if it' s 84volt the sabvoton can handle it?
Love this! Great show of the build!! Show the battery!
You will see it in the next video (should be online in a few days)
List component and where buy it?
What did you do to get the domino throttle working, mine is just dead on the bars no voltage going through it at all.....
You still riding it?
01:30 - How did you program the engine to work with 3 speed stages
How did you get that throttle to work with the sabvoton controller? Resistor inline with the wiring.
You have to adjust the throttle min and max value in the controller, no resistor needed
Hay. Love your work. Very nice. I am building same bike. working on the battery. Can you tell me what size (ahm) fuse you are using. Thanks keep up you great work.
How can make this one link to older pls ?
Очень хотелось бы иметь такой байк👍
What power fuse size u are using thanks
is it sold in this configuration ?
Really nice ebike mate. Can I ask what windings you have on your motor? Am I right in saying a 2T motor is the high torque (lower speed) end and 5T and 6T is lower torque but higher speed? I am about to buy an ebike with 12000w battery and a QS273 motor with 21 in wheels, and a 49Ah battery, the default winding on that is 2.5T but I can get it customized. I want good torque and high speed. What xT makes that possible?
The higher in T the more torque … so a 2T has higher top speed than a 5T, the 5T will have more torque 😉
Do you have a video formyour battery build?
What is weight of the rider and range with speed 45km/h I guess 20s11p is too small for more than 50km range
Please list the links to the parts to purchase...awesome bike
Qs 205 v3 or Qs 273 v3 ?. Which one you recommend
I love it. Looking at yours, I want to make one of my own.
A few questions though:
The QS273 looks like a 4k/8k watt motor.
What is 12.5 kw referring to on your bike?
Thank you!
"4kw" or "8kw" thats the nominal power a motor can handle constantly without heating up QS motors are usually way underrated, a QS273 can easily handle 15KW and modified 20-30KW peak power.
WOW Nice build!
Hello! Awesome build. Can I ask which 273 motor you're using, specifically if you're using a model with 200mm dropouts? I can't seem to find 200mm width swing arms anywhere online and all enduro frames come with between 120 - 155mm drop outs. Thanks!
Hello,
thanks... I have modified the swingarm to fit the 273
@@dszgarage357 I thought that might be the case. Can I ask what tire and rim size(s) you're running? Also I really appreciate the initial reply!
@@Phyysics i use VRM-140 70/100-19 42M tires - front and rear
@@dszgarage357 Gotcha thanks. Last question...who built your battery pack?
@@Phyysics i just asked someone, who sold some batterypacks on ebay, if he could build me a custom one.
Where did you connected the 3modes switch?
Where can I buy that e-bike frame?
where did you get the mudguards?
3D part files: www.thingiverse.com/thing:4308190
build video: czcams.com/video/RrWEVfq87uU/video.html&ab_channel=DSZgarage
Thanks man
Hi DSZ garage, what kind of top speed do you get with that 12kw hub motor. If you don't mind me asking? Thank you, great video!
@@erickv81 87 km/h (gps mesured), but I think there is still some potential left in the controller settings, to make it faster.
can you make a tutorial
@@ghosty5875 I will make one, but I'm waiting for some new parts...
Hey do you have a website where you can build these electric bikes for any one man I would love to have the same setup
Hey, I have no website and I'm not planning to do something like that. Just look for a similar bike on Alieexpress and change some parts and you will have a "nearly" identical bike....
Or buy all the parts you want and assemble it yourself.
Hey man, I want to build this thing to, where can I read up on this?
What is ur current limit in advance settings? I got same bike
How many amp hour is the battery
Beau montage.. Je devrais prendre exemple !!!!
Is the 72v 50ah 3000w battery compatible?
hey did you make that battery yourself? or did you buy it somewhere. Looking to get the same battery pack for my build. Awesome build btw looks fast as hell! Thanks!
Hey, no I didn't build the batterypack myself... this one was custom build for my needs.
Hello your enduro ebike videos have motivated me to put together a beast like that, but I have several doubts about the configuration of the controller because I have no idea if it is only installed and already or I suppose that you have to do several configs, to improve performance if you can help me please
You need to adjust the standard controller settings to your own bike....
throttle settings, max amps your bike can handle and so on....
I don't have the time to make a detailed config for your bike, but if you have any questions, feel free to ask and I will answer when I have some time
Were you are located? And can i order a bike like that with you guys?
One question, why such an excess of power? Efficiency is low, there is a great chance to roll the axis, and of course the higher the speed, the closer to God)
Which battery have u use on it
Hey do you have a link to these bike stands?
I bought the orange swingarm stand locally and the front wheel stand for extra small tire width is from powerplustools.
Hermosa máquina !!!!! 😎😎
donde puedo comprar este tipo de bicicleta electrica con esa velocidad
This vs surron what's better?
Absolute madness.
Can this bike handle a 72200 controller
Wouldn't make a difference. As long as the battery doesn't deliver more amps or voltage you wouldn't get more power out of it if you only upgrade the controller
Nice build, & Very Fast, I have the same frame. If you don't mind what's your battery measurements with everything inside? Thanks again for the helpful content 💯
Thanks, do you mean the battery box dimensions?
I’m pretty sure @TRIPSUP is wondering what’s the dimensions of the battery. It’s pretty unique to the shape of the frame battery box.
Where did u buy all the parts?
where did buy the motor and the frame?
motor - Alieexpress
frame - eBay (got it cheap of someone who didn't started a build)
how many inches are the rear rim?
rear wheel what size?
19 inch
what throttle do you have?
So rude! What phone app do you use as your display? How do you know how much juice you have left? The internal wiring is sooo neat!
Usually I ride without my phone as display, it's just a GPS app to show the speed. I open the MQCON app to see the battery voltage.. I don't really need a display that shows me the battery percentage, because I ride less than 1 hour most of the times.
DSZ garage cool, is that why you have the controller shunt? Man, 3D printed ducting is awesome. I found some roof soffit in my workshop I’m using. can’t believe how massive your battery is!! Also have you put a fuse box in there?
@@streetleathal what do you mean with "is that why you have the controller shunt?" 🤔... Yes its pretty big 20s11p with bms - housed in a 3mm abs box. I only run a anl fuse 2:35 .
What kind of range can you expect from this if just commuting around without speeding, moving like normal traffic
Как тут игрушечные колодочки при торможении горят, так реально надо автомобильные дисковые тормоза ставить.
Wow that's amazing
3.5T or 5T?
can this frame handle proper downhill trails and big jumps? i'm talking like uk dh series tracks and stuff, not just forest riding
This bike is not for downhill, way to heavy, it would be almost like riding a motocross on a tight downhill pass for bikes. But it's a beast for uphill.
@@dszgarage357 ohh yeah I know it would be bad and awkward at downhill, i just meant i want to know if it can handle the frame stresses, sometimes I ride over very rough rocks and i'm scared the rear swing arm/suspension joins will fail
The bike is build massively and should be able to take some load (also depending on your suspension). But the Qs273 hub motor is pretty heavy and will drag the bike down, better would be a qs205 or a middrive.
Which is the marc
where did u bought it?
What is the top speed on this? What determines the top speed, the controller or the battery?
Both.battery and controller. you can open the controller for max speed but! if you don't have enough battery it just going to starve and run weak
fantastic machine !!
Is your QS273 3.5T or 5T
Music tile & performers PLEASE!!! 😉
Surface - Kraedt ;)
how much does it cost?
How mutch money for this bike???
How much does it cost?
Daaaaang!... "King of the Road!".
Planetary gear inside?
Which is tej marc
How much did this cost?