Lajos Pintér the landyachtz cobra blaster is a dope 80s throwback the wheels are super soft nice for cruising I replaced them with 94a kryptonics star tracks for park skating.
For a moment I thought you were speaking English, then I realised I'm starting to understand German after all the random videos I've seen. Thanks CZcams. Nice video by the way, reminds me of my first boards!
I see you got new wheels after destroying the old ones. You ground down a lot of material left on the wheels by using a file. Next time, use a fine grit sand paper to remove the dirt and condition the wheels for street use instead of removing the wheel itself.
Das Video hat mich inspiriert, mein altes Jack the Ripper Skateboard von Bauer/Saturn wieder aufzubauen. Leider war das Brett an sich wirklich nicht mehr zu retten- deshalb habe ich den Aufdruck auf Ober- und Unterseite eingescannt und am PC restauriert. Dann habe ich aus mehreren Lagen Sperrholz mit Hilfe einer Pressform ein neues Brett geleimt und bedruckt. Rollen habe ich bei eBay nagelneue bekommen, in genau dieser Old School Form. Danke für das Video, ich habe jetzt einen richtigen Eyecatcher zuhause!
wow great work! glad that you preserved the original wood condition and paint. Im really interested in what do did with the layering of the fiberglass sheet. I want to try that as well. do you know any videos or tutorial to get me familiar with using fiberglass?
Respekt ! Geile Arbeit geleistet, zuerst befürchtet ich Du würdest es komplett neu anmalen, gut das Du die original Farbe gelassen hast. Die Idee mit der Glasfaser Schicht war super. Bewahre das Bord gut auf, das wird irgendwann mal viel Wert sein. Mein erstes Skateboard ist von 1978 !
Richtig cooles Video! Ich hab sowas vor ein paar Monaten mit dem alten Skateboard meiner Freundingemacht jedoch habe ich dort auch noch ein neues Design gemacht. Ich hoffe du hast noch viel Spass mit deinem Board
Ich habe vor 3 Jahren ein Retro Board weg geworfen weil ich es nicht brauchte. Jetzt hab ich das Gefühl das ich einen Fehler gemacht habe. Trotzdem Hammer Video. Daumen Hoch.
kleine frage, bei nem kleinen cruiser a la dinghy: bei meinem zarten Gewicht von 103 kg-> wieviel lagen würdest du mir von welchem holz empfehlen (du nimmst birke sperrholz oder? )
ui hatte damals als ich noch ein wenig kleiner war auch so welche, die ich iwann mal von irgendeinem bekannten bekommen habe...waren super in schuss die teile und ich war so bescheuert die beim Umzug im Keller zu vergessen
The only thing is that was an incredibly cheap skateboard back in the 80s. Almost flat without kick tail. They were about £14. In comparison a good deck (wood only) like a Tony Hawk was £50 - £60. The difference between the two was immense.
If at some point I decide to recondition my shitty first skateboard is going to be your fault ..have a similar look, but I guess it was mostly a toy. Great video
hey Dr.S Wiedermal gute und saubere arbeit von meinem Longboardbau Idol :) Ich hätte noch eine Frage zu meinem nächsten Brett. Der Kern aus 4 mm Birke Sperrholz und 3 mm Pappel Sperrholz das Laminat unten ist - 300 g/m2 UD Glas Gelege -400 g/m2 Biax Glas Gewebe -160 g/m2 Köper Gewebe Carbon Das Laminat oben hat nur eine Schicht Biax würde dieses Brett mit einem Achsabstand von ungefähr 70 cm und einer Camber von 3 cm funktionieren?
Danke :) Wie ist dein Kern aufgebaut? Echt nur 4mm Birke+3mm Pappel oder 4mm Birke+3mm Pappel+4mm Birke? Ersteres wird nicht gehen. Der Faseraufbau klingt gut, Torsionsbox vorhanden, UD auf der Unterseite, Carbon wohl nur als Sichtcarbon. Ob das funktioniert ist natürlich abhängig von deinem Gewicht ;)
+sidekickx81 Danke für die schnelle Antwort :) die person die das Board erhalten wird ist noch jung und ich wollte ihm kein "Brett" gebeb Wen ich die von dir empfohlene 4 mm birke+ 3 mm pappel + 4 mm birke Zu 4 mm Birke+ 3 mm pappel + 3 mm pappel wechsle? Ist es dan zu unausgeglichen oder könnte dies so gehe?
Wenn der Boarder "jung" ist, gehe ich von keinen 70kg aus, richtig? Schau dir doch mal mein lila "Lotte Board" an. Ist ein Kinderboard mit 2x4mm Birke und entsprechendem Glasaufbau. 4mmBirke+3mmPappel+4mmBirke zusammen mit deinem Faseraufbau wird für ein Kind entwas überdimensioniert sein. Ich würde Pappel nur als mittlere Kernlage nutzen, nicht wie von dir angedacht 4mmBirke+3mmPappel...
Servus, habe mir letzte Woche mein Kindheitsskateboard ersteigert und bin auf der Suche nach Restaurationsvideos gleich auf deins gestoßen. Eine Frage, welche Glasfasermatten verwendest du? Und wieviel g/m2 hatten die? Danke für die Antwort. LG, Flo
Das war ein sehr leichtes Leinwandgewebe, es erhöht die Festigkeit nur minimal, ich wollte das es maximal durchsichtig wird um die original Grafik sichtbar zu lassen. Ich glaub so 50g/m²...
I want that board! The 80's boards are the bests! Good job man!
Lajos Pintér the landyachtz cobra blaster is a dope 80s throwback the wheels are super soft nice for cruising I replaced them with 94a kryptonics star tracks for park skating.
I’m getting one of the Powell peralta og boards soon
For a moment I thought you were speaking English, then I realised I'm starting to understand German after all the random videos I've seen. Thanks CZcams.
Nice video by the way, reminds me of my first boards!
TheRokkis sounds trippy
no you’re not... when he started talking he said a few english words then went to german. u don’t know how to speak german.
Me too
Yeah I though I randomly learned how to speak a different language
Trippy me too. Then I remembered i just smoked the bomb weed
STAY STWONG!!!!!!!!
F1ght1ngF1sh 😂😂😂😂
Don’t twust
Thank twith
Lmao these comments
wut wut wut
yo that board is sick!! I love the old school boards, I have an old metal one from the 70s and a Caballero reissue
California sun it says on top of the board 👌🏼 , im so blessed to be born and raised here in southern cali . This is where skateboarding was born .
I see you got new wheels after destroying the old ones. You ground down a lot of material left on the wheels by using a file. Next time, use a fine grit sand paper to remove the dirt and condition the wheels for street use instead of removing the wheel itself.
Great job. Very well executed. Thx for sharing this. Cheers, Mike
Da erinnert man sich doch gerne dran. Diese Art von Skateboards gab es damals für 10 Euro bei Woolworth....Coole Sache :-)
Das Video hat mich inspiriert, mein altes Jack the Ripper Skateboard von Bauer/Saturn wieder aufzubauen.
Leider war das Brett an sich wirklich nicht mehr zu retten- deshalb habe ich den Aufdruck auf Ober- und Unterseite eingescannt und am PC restauriert. Dann habe ich aus mehreren Lagen Sperrholz mit Hilfe einer Pressform ein neues Brett geleimt und bedruckt. Rollen habe ich bei eBay nagelneue bekommen, in genau dieser Old School Form.
Danke für das Video, ich habe jetzt einen richtigen Eyecatcher zuhause!
Amazing! What such loving work to restore the skateboard. Old school made new!
Respekt! Sehr cooles Projekt geworden. Sowas möchte man doch gerne mal öfters auf CZcams sehen!
Suuuuper impressive man! You put a lot of tremendous work into that project and it turned out great! So cool to see, thanks!
Thanks for the great feedback :)
very cool board - nice work fixing it!
I really enjoyed this. Nice save!!
Sehr cool restauriert! Hab auch noch so n Brett im Keller. ^^
wow great work! glad that you preserved the original wood condition and paint.
Im really interested in what do did with the layering of the fiberglass sheet.
I want to try that as well. do you know any videos or tutorial to get me familiar with using fiberglass?
Respekt ! Geile Arbeit geleistet, zuerst befürchtet ich Du würdest es komplett neu anmalen, gut das Du die original Farbe gelassen hast. Die Idee mit der Glasfaser Schicht war super. Bewahre das Bord gut auf, das wird irgendwann mal viel Wert sein. Mein erstes Skateboard ist von 1978 !
Richtig cooles Video! Ich hab sowas vor ein paar Monaten mit dem alten Skateboard meiner Freundingemacht jedoch habe ich dort auch noch ein neues Design gemacht. Ich hoffe du hast noch viel Spass mit deinem Board
Fantastic job! Excellent!!!
very nice!! looks good
I had a similar board in 1990... the plastic wheels were horrible😣 great job!!
Arr, ganz viel Liebe für Polar Bears - du hast einen top Achsen Geschmack :)
Ein CS Board. Wie geil. Super Video.
Geiles video! ich feier alte skateboards, auch wenns kein powell peralta etc ist. Tolle Arbeit!!
Wirklich geil gemacht 👌Mach weiter so! :D
I've got my old board from like 1987. This has given me ideas
Hats off to you man that was a great job.
great job and better than when new!
Sweet job.looks great.
Descrption:
"Musik" LOL no hard feelings your great bro keep on doing what your doing. You rock!
he's German
I just can't get over the singer's speech impediment, "be stwong, think twice....blah blah blah" aaaaaaand now its stuck in my head....dammit...
Scott McKinstry ur an idiot......
Scott McKinstry me too
So freaking good work mate i love it
I just found my dad's old skateboard, and it's just like this one, I'm about to try this out.
Oscar Fernandez Go 4 it 👍🏻
What happened?
I like how there was the slomo when he did something lame
If it was the 80's that woulda been rad as hell
This was a great video!
Ich habe vor 3 Jahren ein Retro Board weg geworfen weil ich es nicht brauchte. Jetzt hab ich das Gefühl das ich einen Fehler gemacht habe. Trotzdem Hammer Video. Daumen Hoch.
Echt fett was du aus den alten Decks noch machst. Hätte nicht gedacht das es jemanden gibt der sich für setwas so viel Zeit nimmt, richtig cool!
War ein Spaßprojekt und ich hatte etwas Zeit. Schade das es kein besonderes Board war, ist nur ein "Supermarkt-Board"....
sidekickx81 macht doch nichts sieht am ende trotzdem super aus
You didn't keep the lapper! That was the coolest part about the old board
Those bearings looked crazy
Legit skating on a budget, whatever it takes never stop skating...
Those are some sick overalls!
Love your work 😁Rispetto 🤙🏻
great job!!
Echt cooles Video, wie die Gebrauchtwagenprofis auf D Max nur mit Skateboard :-)
Echt gut geworden!
Nice job!
It cruises good have fun with it
That's a proper skateboard.
I got no idea what you're saying but this is one of the best videos on CZcams...
;D just german ;) Then have a look on my channel and for example the honeycomb downhill board
Bro you reminded me I wanted to buy some overalls...I got an old school to :)
Now, i miss my old school skate!
that tailslide at the end was sick guys a god
Very satisfying i love it
Cool wollte mir vorkurzem ein uraltes Longboard kaufen hatte ein Griptap aus Leder 👌🏼
grandísimo trabajo amigo 👌
Einfach nur geil
Awesome rubber boots dude!
Well done!!
Awesome!!
california sun war schon damals nur nen billig Teil. aber trotzdem schön, was du daraus gemacht hast.
That a cool board
I used to have a board like this. Also around 22 years ago.
show de bola ....lembraça dos anos 80
this looks insane
kleine frage, bei nem kleinen cruiser a la dinghy: bei meinem zarten Gewicht von 103 kg-> wieviel lagen würdest du mir von welchem holz empfehlen (du nimmst birke sperrholz oder? )
Wow when did the boards i used to skate with become retro lol
ui hatte damals als ich noch ein wenig kleiner war auch so welche, die ich iwann mal von irgendeinem bekannten bekommen habe...waren super in schuss die teile und ich war so bescheuert die beim Umzug im Keller zu vergessen
Gut arbeit!!
So he had the same pivot cups/bushings? I had a board from 1997 that I recently found and the pivot cups were basically dust
I still remember my hot pink Variflex Eliminator
Smooth af!
Du hast zu viel Zeit;)Schönes Ergebnis,weiter so!
Die Zeit hab ich mir genommen :) Leider ist meine Zeit echt sehr knapp, habe soviel Ideen und kann leider nicht alles umsetzen :(
This song sounds like that super big popular techn song from the early 2000s. Do you think you’re better off alone?
The only thing is that was an incredibly cheap skateboard back in the 80s. Almost flat without kick tail. They were about £14. In comparison a good deck (wood only) like a Tony Hawk was £50 - £60. The difference between the two was immense.
If at some point I decide to recondition my shitty first skateboard is going to be your fault ..have a similar look, but I guess it was mostly a toy. Great video
Nice!
sehr gut
cool
My first one are like that one 😊
Und GUTE BESSERUNG !!!
Cooles Video Dr. S
Wenn du möchtest könnte ich dir so nen 10 Minuten Music Mix für deine Videos machen ^^
Ich habe noch so ein altes zuhause dann werde ich es auch mal aufbereiten;)
Heyho let's go 👍🏻
nices Video
Faltou mais lixa no Skate ,mas ficou ótima a troca de peças ,bom trabalho
hey Dr.S
Wiedermal gute und saubere arbeit von meinem Longboardbau Idol :)
Ich hätte noch eine Frage zu meinem nächsten Brett.
Der Kern aus 4 mm Birke Sperrholz und 3 mm Pappel Sperrholz
das Laminat unten ist
- 300 g/m2 UD Glas Gelege
-400 g/m2 Biax Glas Gewebe
-160 g/m2 Köper Gewebe Carbon
Das Laminat oben hat nur eine Schicht Biax
würde dieses Brett mit einem Achsabstand von ungefähr 70 cm und einer Camber von 3 cm funktionieren?
Danke :) Wie ist dein Kern aufgebaut? Echt nur 4mm Birke+3mm Pappel oder 4mm Birke+3mm Pappel+4mm Birke? Ersteres wird nicht gehen. Der Faseraufbau klingt gut, Torsionsbox vorhanden, UD auf der Unterseite, Carbon wohl nur als Sichtcarbon. Ob das funktioniert ist natürlich abhängig von deinem Gewicht ;)
+sidekickx81 Danke für die schnelle Antwort :)
die person die das Board erhalten wird ist noch jung und ich wollte ihm kein "Brett" gebeb
Wen ich die von dir empfohlene 4 mm birke+ 3 mm pappel + 4 mm birke
Zu
4 mm Birke+ 3 mm pappel + 3 mm pappel wechsle?
Ist es dan zu unausgeglichen oder könnte dies so gehe?
Wenn der Boarder "jung" ist, gehe ich von keinen 70kg aus, richtig? Schau dir doch mal mein lila "Lotte Board" an. Ist ein Kinderboard mit 2x4mm Birke und entsprechendem Glasaufbau. 4mmBirke+3mmPappel+4mmBirke zusammen mit deinem Faseraufbau wird für ein Kind entwas überdimensioniert sein. Ich würde Pappel nur als mittlere Kernlage nutzen, nicht wie von dir angedacht 4mmBirke+3mmPappel...
Servus, habe mir letzte Woche mein Kindheitsskateboard ersteigert und bin auf der Suche nach Restaurationsvideos gleich auf deins gestoßen. Eine Frage, welche Glasfasermatten verwendest du? Und wieviel g/m2 hatten die? Danke für die Antwort. LG, Flo
Das war ein sehr leichtes Leinwandgewebe, es erhöht die Festigkeit nur minimal, ich wollte das es maximal durchsichtig wird um die original Grafik sichtbar zu lassen. Ich glaub so 50g/m²...
sidekickx81 Top, Danke dir.
Gut arbeit
Da hora cara você é muito da hora
Mad scientist 👨🔬
wie geiiiiil :-) :-) :-) :-)
genau so ein board habe ich auch gefunden und werde es neu gestalten :)
Viel Spaß damit :)
Danke
👏🏼👏🏼👏🏼🤩
Könntest du ein Video machen wo du ein oldschool skateboard baust???
Круто получилось
was für eine deltaschleife hast du? Ich suche zurzeit eine, weiß aber nicht wo ich anfangen soll. Kannst du mir eine empfehlen?
Eindeutig Fein Multimaster! Aber kein Schnäppchen. Etwas günstiger der blaue Bosch GOP 250, noch günstiger der grüne Bosch PMF 190...
+sidekickx81 Danke, schau ich mir mal an ;)
+Lukas The Lulu Festool ist auch sehr geil 👊👊👊
Cool
Jo Doc!
Hab heute mein 2.Board in die presse eingespannt, jedenfalls wollt ich mal fragen ob du Twitter hast
so für fragen und anregungen😉
Ne, bisher nur hier aktiv, ist genug Arbeit 😂 Hab aber schon drüber nachgedacht... Mal sehn, könnte noch werden ☺️
+sidekickx81 Oke cool!
und mach weiter so mit den videos! Die sind echt die besten tutorials auf yt rund ums brett💪👍
Incrível...
Ich finde du hast dich in deiner Videoqualität echt gesteigert, mach weiter so!
Danke, steckt auch viel Arbeit drin 😉 Hab die Kanten mit Epoxi behandelt.
nice
Retro dude🎉