Welding Rig Fixed!!! Several Welding Projects To Come!!!

I got my welding rig fixed, and have several welding projects to come soon! I replaced my fuel system and installed a 33 gallon saddle tank from 4statetrucks, so i will have a f350 with saddle tanks. I will be relocating it to under the bed after I build my flatbed which will be coming soon!!! which means i will have lots of videos coming up soon!!!
I will be doing a review on my plasma cutter I just bought and will be doing a video series of building my f350 flatbed for this truck! i hope this inspires y'all to do something like this to and i look forward to seeing y'all's builds when you all make them!!!
I did this to fix my f350 fuel filter light and fuel system restriction causing a fuel system vacuum to be pulled inside the fuel system.
these are the parts I used to do this!!!
fuel tank listed as 28 gallon but actually a 33 gallon: www.4statetrucks.com/fuel-tan...
fuel tank vent: www.4statetrucks.com/fuel-tan...
Fuel tank cap: www.4statetrucks.com/fuel-tan...
sending unit will post later when i find the correct one to replace the one i ordered with
teltek fuel level guage red led: www.4statetrucks.com/interior...
fittings 90degree 1/2" npt to 3/8 barb: www.amazon.com/gp/product/B00...
1/2" npt plug: www.amazon.com/gp/product/B00...
16ga red wire: shop.advanceautoparts.com/p/a...
16ga black wire: shop.advanceautoparts.com/p/a...
16 ga white wire: shop.advanceautoparts.com/p/d...
3/8 fuel line from advance auto
clamps for the hoses and some assorted components for the wiring but that is all i cant think of for the moment
-----------------------------------------------------------------------------------------------------------
I am using a Lincoln Ranger 225 engine driven welder as my power source
Welder review: • My Engine Drive Welder...
Radnor stinger
Radnor ground clamp
HOW TO HOOK UP A SCRATCH START TIG RIG VIDEO LINK: • How To Hook Up a Tig T...
-----------------------------------------------------------------------------------------------------------
Adam's welding is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
I get commissions for purchases made through links in this post.
WELDING LEAD AMAZON AFFILIATE LINK:
DENSE CONNECTOR AMAZON AFFILIATE LINK:
WELDING GLOVES AMAZON AFFILIATE LINK:
JACKSON SAFETY WELDING HELMET AFFILIATE LINK:
DEWALT ANGLE GRINDER AMAZON AFFILIATE LINK:
TIG TORCH KIT AMAZON AFFILIATE LINK:
TIG TORCH CONSUMABLE KIT AMAZON AFFILIATE LINK:
-----------------------------------------------------------------------------------------------------------
Incase you are new to my channel.
I am Adam and this is my welding channel Adam's welding, I have been welding for a few years now and finally started up a channel on CZcams to show some of my personal work and maybe teach some of you a tip or trick i have learned along the way. I hope you enjoy my channel! If you like my channel like, comment, subscribe, and click the little bell icon to be notified of my future videos!!!
About my channel: • ADAM'S WELDING CHANNEL...
My welding rig is a 1990 f350 7.3idi dually, with a Lincoln ranger 225
Rig Walkaround: • My Engine Drive Welder...
Welder review: • My Engine Drive Welder...
FACEBOOK: / adamsweldingrig
INSTAGRAM: / adam_welding
-----------------------------------------------------------------------------------------------------------
Playlists:
Welding rig playlist: • ADAM'S WELDING CHANNEL...
Stick welding playlist: • Stick welding
Tig Tuesday Playlist: • Tig Tuesday

[@adamswelding5052]

Hey I added some affiliate links to my description go check them out!

[@adamswelding5052]

Hey I. This video I show how I mocked up the fuel tank in the bed of my truck to test it out. And this proved the fuel tank system was the problem cause it ran fine now and I will be showing how I make my flat bed soon and will also show the plasma cutter I bought to make it along with some tricks for setting it up and using it to make the flat bed! I hope you all like it!!!

[@randymack1782]

when you "splice" wiring, do it right & solder it, & shrink wrap, or RTV wire end of water proof connectors, to save yourself corrosion issues in the future. ill be looking forward to plasma cutter video, I have never ever used a plasma cutter, I have always used oxy/acetylene with a "Henrob 2000" torch to cut which has worked pretty decently.

[@adamswelding5052]

I never could get used to my Henrob torch to really get it dialed in I used it more for welding than as a cutting torch. I use my victor journeyman for thick steel and will be using this plasma for its speed hopefully! But I will be doing a video of it soon