Kaabo Mantis Pro Tyre Change

In this Video we show you how to change your Kaabo Mantis Pro tyres from standard road tyre to the new Kaabo Mantis Pro Hybrid off-road tyres.
These Kaabo offroad tyres are now available online.
Kaabo Mantis Hybrid Tyre - kudosgear.co.uk/collections/k...
You can use this same method to replace standard tyres or replace an inner tube

[@basincut100]

Thanks a lot for this very clear and detailed tutorial. I have a Mantis Pro on order so this will be very handy in the future I’m sure. Would love to see a review of those new hybrid tyres on and off the road if you get the chance.

[@PauloFernandes-myTeam]

TY!! if you remove the right arm (only two screws), it is much easier

[@schlooonginator1227]

Rub babt powder on tube before reinstalling to help prevent pinch flats. It allows to tube to slide about rather then stick inside.

[@esrider7765]

I find it helps to have a little pressure in the inner tube to stop it getting trapped by the rim.

[@leeschmidt5822]

Thanks ES - will try this next time. Cheers

[@Kamikazekman]

I'd also put a little blue loctite on those wheel motor hub screws... just in case.

[@leeschmidt5822]

Yep, this is a good tip - agree with this. Cheers

[@brianmcmanus4286]

Thank you.

[@kaleb5897]

thanks bro

[@timpriestley8997]

Brilliant and informative video man....thanks - how do you find the hybrid tyres? Ill change from roads to these in a few weeks, wondering what you think? I didn't want full off road tyre so got these also

[@leeschmidt5822]

Hi Tim, thanks for the feedback. We would definitely recommend the hybrid tyres. Basically we didn't notice much (if any) drop in performance while on the road, but did notice a significant increase in performance when taking them off-road....so it seems like a no-brainer to us! Cheers

[@itimebomb89]

The Allen screws on my were insane tight and had thread locker on them. I stripped two of them and had to weld my Allen wrench on to them to get them out. Terrible idea from the factory.

[@paatz04]

mine too... I ended up buying a 450mm breaker bar. was very easy with that.

[@natebice7375]

👍

[@ewtwetrwerwteet]

Can you put these 10x3 ones on the Kaabo Mantis Solo? Or only the pro? Are the tyres different or just number of motors

[@punyaphonteangtongkum5957]

👍👍👍🙏🙏🙏

[@firstchoicecp]

I've got the kaabo mantis 10 duo, I have the stock 2.5 road tyres, if I upgrade to the 3" tyres do I need new extended fenders or anything or is it a straight swap?

[@leeschmidt5822]

It's a straight swap on the Mantis 10. Cheers John

[@whynot0969]

What size Tyers are they, cause I got told by the scooter place that I can’t put off-road Tyers on? Even though in the Controll settings, it has 2 different Tyers sizes🤷‍♂️🤯

[@kudosgear773]

They are 10x3 - kudosgear.co.uk/collections/kaabo-parts/products/10-x-3-hybrid-offroad-tyre-for-kaabo-mantis-pro-mantis-10

[@whynot0969]

@@kudosgear773 thank you 🤙👊

[@BurstSenpaii]

Question what if you have a tubeless tyre?

[@phil3306]

Then you won't need a tube

[@microsoft1665]

bro my motor doesnt move after removing 6 screws. help me plz. 4:13

[@Maykay1312]

U removed the wrong screws or didnt pull it hard enough

[@microsoft1665]

@@Maykay1312 i solved it by hammering flat screwdriving between the rims. it was really stuck.

[@jesusisoursavior2682]

i hear there is anlot of problem on mantis after 500mile

[@mauriciovanegas4755]

what is the air pressure of the tire (8.5 inch)?

[@jesusisoursavior2682]

yes its true

[@108mtsan]

I rode my mantis pro for 1,600 miles already. No issues and no flat tires yet!