How to program ESP8266 wifi module using Arduino UNO in easy steps || ESP8266 module || ESP-01
Vložit
- čas přidán 7. 08. 2024
- components list
ESP8266 MODULE - amzn.to/3LkidW9
ARDUINO UNO - amzn.to/4630lbJ
Breadboard - amzn.to/3XZVar3
jumper wires - amzn.to/3xR7Aai
green mat - amzn.to/3W2tEqB - Věda a technologie
Can't we program esp 01 without removing IC from Arduino?
thanks for the video! but did you solve the packet head error like you showed in the thumbnail?
Very nice video thanks for this video
then why you even didn't like it 😂
bro how to use serial monitor after flashing the code in esp-01s module ??
I tried with arduino nano and I got this error:
. Variables and constants in RAM (global, static), used 32464 / 80192 bytes (40%)
║ SEGMENT BYTES DESCRIPTION
╠══ DATA 1500 initialized variables
╠══ RODATA 1124 constants
╚══ BSS 29840 zeroed variables
. Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 61483 / 65536 bytes (93%)
║ SEGMENT BYTES DESCRIPTION
╠══ ICACHE 32768 reserved space for flash instruction cache
╚══ IRAM 28715 code in IRAM
. Code in flash (default, ICACHE_FLASH_ATTR), used 239188 / 1048576 bytes (22%)
║ SEGMENT BYTES DESCRIPTION
╚══ IROM 239188 code in flash
esptool.py v3.0
Serial port COM7
Connecting...
A fatal esptool.py error occurred: Write timeout
Any idea on how to solve this?
Hello, I don't speak English but I will tell you about an experience I had between Arduino Uno and ESP8266 ESP-01.
I had the same error when trying to load a program and had the following solutions.
-If you have an arduino uno in which you cannot remove the atmega CPU manually, you must connect the arduino uno reset to ground with that it will let you charge, also remember that to program in esp8266 esp-01 you need to connect the GPI0 to ground and the en(enable) to 3.3v
-If you have a direct converter from esp8266 esp-01 to serial (usb), remember that the GPI0 has to have a bridge with ground to program, generally it is chosen to solder it with a button since these normally do not have an integrated one.
@@steveb9357 thanks for the help, I’ll try it out based on your suggestions ✨
How to take code for gas leakage detector from you. Iam from Nepal
Maine aapka video use kiya tha
Why the red light on my esp-01s not turn on?
me too
did u solve this problem?
My esp8266 still show failed to connect to esp8266: timed out waiting for packet header. It still not solved after i unpin IO0 and pin again. Pls help me.
Same error I also get.
You have to reset it
How to reset it
Managed to solve it? Cause i got the same error?
Sorry Bhai please mere chanel pr copyright strike aa gya hai please help me