C7 Corvette ZR1 ZTK High Wing Spoiler Install from Extreme Online Store | EOS ZR1 ZTK WING INSTALLED
Vložit
- čas přidán 12. 11. 2020
- C7 Corvette ZR1 ZTK High Wing Spoiler Install from Extreme Online Store | EOS ZR1 ZTK WING INSTALLED
In this episode of Five12 Garage, we install the EOS ZR1 ZTK High Wing Spoiler from Extreme Online Store on our 2017 C7 Corvette Grand Sport. The ZR1 ZTK High Wing Spoiler from EOS mounts to the chassis of the C7 Corvette for added stability and rigidity. The ZR1 Spoiler is finished in Carbon Flash and is available for the wide body C7 Z06 and Grand Sport as well as the C7 Stingray Corvette.
Watch the EOS ZR1 ZTK High Wing Spoiler Prep Video:
• C7 Corvette ZR1 ZTK Hi...
Want your own EOS C7 Corvette ZR1 High Wing Spoiler:
five12garage.com/collections/...
Get the Five12 Garage Hat: five12garage.com/collections/...
Checkout Greg's IG: gregs.c6
Email Me: scott@teamfive12.com
Buy Corvette Parts and Accessories: five12garage.com/
Camera Setup:
GoPro Hero 7 Black: amzn.to/36ZpmVA
Ulanzi Cold Shoe: amzn.to/37fWo4b
Ulanzi Housing: amzn.to/2rpXRWf
Movo VXR10 Mic: amzn.to/2tGna70
Sony A6400: amzn.to/2GIVzpa
Sigma 30mm Lens: amzn.to/37PUyre
Sarmonic Wireless Mic: amzn.to/2VblG05
Five12 Garage
====================
Follow on Instagram:
/ five12_garage
====================================
2017 C7 Corvette Grand Sport Heritage 3LT
Stage 2 Rear Winglets - GM
Stage 2 Front Splitter EOS (extremeonlinestore.com)
Stage 3 Winglets EOS (extremeonlinestore.com)
AWE Performance Xpipe
AWE Touring Axle Back - Diamond Black Tips!
Black lug nuts
Red Seat Belts - GM
ACS Composite Front XL Rock Guards
====================================
1999 C5 Corvette FRC (Fixed Roof Coupe)
LS1
Custom Lunati Cam
Blackwing Intake
Complete Street Performance Tune
Texas Speed Headers
Offroad X-pipe
Z06 Titanium Cat Back
RKT Performance Built T56 Transmission
Monster Level 2 Clutch
Corbeau Evolution X Seats
SpoilerKing 284GC Spoiler
Lloyds Floor Mats
#c7zr1wing #eoszr1ztk #zr1spoiler - Auta a dopravní prostředky
Looks awesome, man! I'm a man who can appreciate the big wing cars 😎
Ha! Yes, yes you are! Loving the big wang! Welcome back to PA. Can't wait to hear about the trip.
Great job Scott and Team!
Oh wow - that looks soooo sick! Love it!!
Thanks man! I appreciate the kind words.
Well dam, that looks flipping fandiddllytastic bro!!
Thanks bro! 🤘🔥🤘
Looks like a completely different car!!!!! Great Work!!!!!
Thanks man! I'm totally digging the new look.
Ok, now I'm sold! Except I'm going with the full Carbon Fiber 👍🏻.
Nasty Scott, looks great.
Thanks so much for the kind words Rich!
Really big transformation, I am always amazed how different they look before and after wing change, we got Victor racing wing last year and still feel surprised when I see it.
WOW Scott it looks great!!!!!!!!
Thanks man! I love it!
@@Team512 I can't wait to see what the rest of the conversion looks like. I started planning the upgrade to my Z06. I'm doing the Magnuson 2650, 180 degree thermostat, and I'm leaning to Kooks 2 inch headers and Xpipe. I'll probably do it in the spring/summer next year.
Nice man! That maggy is a beast of a blower. Paired with a set of headers and xpipe, you’re going to put down big power!
This was so much fun, thanks for trusting me to cut up your car!! haha cant wait to see what we get up to next ;)
Haha! I need to cut into your car now! How about a convertible?
@@Team512 might have to pass on that one hahahaha
Hey Scott, Great meeting you today at Chester Springs
Hey Jerry, great meeting you as well. Let’s connect over email and plan to meetup.
All I can say is WOW!
You never cease too amaze. God damn that looks good. You make it look easy too easy though. I have done some mods to my 19 GS after watching you do them on yours. I think this one may outside of my comfort level.
I done the front splitter upgrade ( quite easy with a lift, as you suggested) also did the skirts or side splitters ( also not a problem ) but this one I think will be a challenge. Any suggestions? It’s usually just me working on the vette.
Aside from that I’m very happy to see some more C7 content, I understand you’re limited. You can only do so much. Lol
I appreciate the kind words Tom! Glad I could help with the front splitter and side skirts. To be honest, the wing is not too difficult. It's helpful to have a second set of hands when removing the rear bumper. After that, it's mostly a one man job. Just make sure you remove enough of the adhesive to slide the main brackets into place. Then just start assembling the "lego set" of bolts and smaller brackets. A few more C7 vids are on the way. Look for one tomorrow morning. Cheers!
I prefer wing what is mounted on the trunk 15 minutes and job is done 😁💪 also i havent got problems while i opening trunk to put something it in
Great video got to talk wife into spoiler
Thanks for the kind words! Let me know when she says yes!
The wing looks really good I like it bro!
Thanks bro! I appreciate the kind words!
I just subbed...thought I already was!
@@Team512 You are welcome and all good brotha. Love the channel and quality. Keep it up
can you post a video at high speed to see if the wing is stable or not. i would love to order that tail if it stables
Good Video, nice wing. Got me thinking about putting one on my C7, but... How you gonna put stuff the trunk now? Golf bag, Carry-on bag, Cooler, T-top etc. How stable is it on the highway? I heard rumors that it flops around?
It does add a bit of a challenge putting things in the trunk. But it was worth the struggle! It shakes a small amount when hitting bumps. I’ve had it on over a year and no problems.
I'm getting that wing and Ivan Tampi Rear Diffusers for my Z06. Roughly $2,200 for parts and my buddy will install for about $350.
Nice man!
@@Team512 do you guys accept the peoples cars for installing the wing? If yes, how much do you guys charge for ztk high wing?
I got charged $600 for installation and took 4 hours
Great video! Couple of questions:
1) One of the most common feedback I've heard of this spoiler is that due to its lack of rigidity, it vibrates while driving on the highway. Has this issue been fixed and/or have you experienced this?
2) I find the ZTK spoiler to be awkwardly high...are the EOS mounts shorter by any chance or do they make a version of mounts that is shorter so the spoiler is closer to the car?
Great questions. Thanks for reaching out! So the wing comes with stabilizer bars that need to be installed inside the wing before installing on your car. I have a video going live on Sunday showing the process. While the stabilizer bars mitigate much of the vibration, you will still notice some small movements at highway speeds. But consider the trade off on price. A full carbon wing setup will cost 3-5x more than this one.
As of right now, there is only one height for the mounts. It’s mounted at the factory ZR1 height.
Thanks again for the great questions and your support. Please let me know if you have any other questions. Always happy to help!
You need to change the red rear lenses to the clear ones.it would look so good.
Would you go clear or tinted?
@@Team512 I would definitely go with the clear ones.
I want to out this wing on my ZO6 but Im worried about being able to put the Tara top in the back...
It does make putting the top in a tad more difficult.
Do you or extreme online store sell the end pieces of the wing separately? One of my end pieces came off because the adhesive didn’t hold up.
Shoot me an email: scott@teamfive12.com.
Well done but u gotta show some non-freak out still shots of the finished product. I about had a seizure at the end of the vid LOL .
Haha! I need a warning before those parts of the video start. ⚠️ May Cause Seizures
More vids coming on the wing. I’ll make sure to include some good seizure free shots. Lol.
How do you prevent water from getting in between the bumper from the mount portion of the spoiler?
Great Question! So quick answer, there's a rubber gasket and I guess you could use some clear silicone sealant if you were overly concerned. Longer answer, I don't think you need to. Here's why...the inside area of the bumper is not open to interior cabin space. Plus the base of the stanchions fit over the holes on the base spoiler. I'd be more concerned about water entering from some of the factory seems in the body panels. Shoot me an email if you have more questions: scott@five12garage.com. Happy to help!
Hey guys can you put that wing on a c6 corvette.
You guys are in PA could I pay you guys to put mine on just like this
Does this spoiler create noises when driving a bit faster or is it rattling?
I have noticed no noise or rattling while driving. I have about 600 miles of driving with it already.
Check it out here: bit.ly/3amK4nw
Can you give me a measurement(center to center on the stansions) where they meet the body? Trying to see if the wing would work on another application. Thanks
Stansions are just about 18” center to center where they bolt into the top of the rear fascia. Shoot me an email if you think it will work. scott@teamfive12.com
*yea, i would want to buy a new wing too and use the old mount. this wing dont work as it wobbles.*
Ahhh, cutting into my bumper makes me nervous.
Uh huh! I've done a few already. It gets easier the second time...LOL
Does it shake when you drive at high speed? Mine shakes
Yes
*i wouldn't recommend this version of the ZR1 wing. i have this one and it wobbles even with the stabilizer and JB weld to glue it in. The wobble is not good for down force. it's only good for looks but if you want one that function then you better go spend a little bit more money to go look somewhere else. This topic have been brought up in the EOS corvette forum also.*
The spoiler shakes when I drive high speed. Yours do the same?
@@alial-wattar5818 *Yes. i even JB weld the stabilizer in the spoiler too and it still wobbles. its embarrassing when it wobbles. There is no point in downforce if that thing wobbles and flap like a bird. Plastic is not good for this type of spoiler. You need a carbon fiber one.*
@@Tewthpaste the plastic one cost me $1500 carbon fiber is $2500
@@alial-wattar5818 *if the E.O.S bracket is the same measurement then you can just buy the carbon fiber wings without any bracket ($1700 not including tax/shipping cost). i dont know if the measurement on the carbon fiber from Weapon X is the same as E.O.S. All you need is if it will fit over the E.O.S bracket. if its OEM measurement then it should fit but i haven't try.*
I purchased one and installed. The issue i have with this wing is, it flexes non stop while driving. You can see the Winglets moving up and down in your mirrors constantly. It's not the Winglets that are the problem other than my first time ever seen 3m tape to keep them mounted, it's the blade (wing itself) that flexes on each side from the pillar (wing mount) on outward to the Winglets. Is this supposed to be normal?? Or did I get a manufacturer defect??
Did your wing come with the stabilizers? Even with them installed you may see a bit of flex as you’re driving. This is normal. Mine does it too. No problems after to close to 1000 miles of driving.
@@Team512 thanks for the feed back. My shipment did come with plastic stabilizers I guess.. After install, I saw in the box some plastic pieces. Every CZcams video I watched never mentioned them.. I was maneuvering the pieces on different areas of the wing and can't seem to figure out the correct configuration.. Any feedback on the install of the stabilizer would be awesome. TIA
Sure! Check out my ZR1 ZTK wing prep video. I go over exactly how to install the stabilizers.
@@Team512 bro, you're a freaking lifesaver!!! Installing those bad boys tomorrow!! Thanks for the feedback for real!! I'm mos def going to refer Five12 to all my corvette buddies!
Thanks man! Always happy to help!
Well there goes 1,200 out of my account.
Ha! Link in the description. Let me know if you have any questions.
sorry tone ur music down
Thank you for the feedback.
Can you please show step-by-step brackets getting installed on the vehicle next time. This really does not help boss
I agree, we missed a main part of the install by not seeing how to measure out where to cut the holes and a few other steps that were just glossed over. Thanks for the video still, but please show more details.
I could never drive my GS with appearance parts from another model Corvette that didn't originally come with my car. That wing is instantly recognizable as being symbolic with the ZR1. Putting it on my GS would take away the uniqueness of my GS. Your car, your channel, my opinion as a loyal viewer.
I totally appreciate the feedback! One of the reasons I installed the wing is because I am also a vendor for EOS products. So I want to give people real world feedback on quality, construction and installation. I appreciate the support bass man!
@@Team512 I'm putting one on a Z06 soon. They are already putting wings on the C8 and the Z06 or Grand Sport isn't even out yet.
Allot of comments on it shaking at highway speeds, what about when your doing 140-160 range? sounds like the wing might not be a good idea. Also my girlfriend is constantly getting me to take the roof off, seems like a pain to put it in the trunk with the wing. and it feels a little weird to me putting a z1 wing on a zo6, makes your nice z06 look like a wanna be z1.