Ernest, I just now received my Tensioner kit from you. I have to tell you, this is absolutely stunningly gorgeous! I cannot wait to install on my M3! and secondly your new "Ernest Rowe" stickers are really cool! thank you very much for all you do for our community.
The barrel tensioner is pulling your barrel out damaging the rear part of the barrel the part that has the transferports and making it off its original place.
@@chrisfigueroa3361 i never got that far. I looked at it and didn’t know so I didn’t go any further. I can see holes in parts of it for a pin spanner but not sure if it’s all thread locked together. Have looked for videos on this but found nothing.
What's the problem with the 800mm barrel setup? I've been looking, and couldn't find it anywhere. When I first saw this , i thaught it was a dream come true. They say that it's no problem them to do a 800mm barrel. The fx MAVERICK SNIPER should be a perfect candidate for all calibers , not just 22. THe impact was in the limelight for quite some time. Its time to let us have at least some crums. Just baught my maverick, and I'm bummed out. 22 long?where is it brother?
There's no videos on how to remove the factory shroud and baffles. It's no doubt pretty simple procedure but it would be good to see it beforehand just in case there is something important to know first.
Hi Ernest, Really enjoy your posts. Would just useing the carbon tensioner and my Donney FL Sumo or any other large capacity silencer to torque the tensioner avoiding the need for a shroud work?
Ernest, thank you for the video. I would love to purchase a barrel tensioning kit from you for my Impact M3 .22 700mm. will you be making those available at anytime? thank you.
good morning Ernest. i have ordered your kit, but was wondering about a Barrel support with clamp? do you offer one? would your kit be compatible with the FX Clamp?
@@12VALVETORQUE -> Hi, indicate what type of barrel mount so you will get the proper tensioner length and BC have a shroud that fit over an FX tensioner also
These videos always come out so long before the product is available.. I lose interest in the product by the time I can actually buy it. But this is exactly what I want for my impact. What’s the ETA on these?!
@@ernestrowe5061 unfortunately not while maintaining the shroud. Not that I’m aware of anyways. What I seen replaces the shroud with a skinny piece of carbon that looks silly and incomplete. Looks like the gun is missing something due to the obnoxious gap between the carbon and the scope rail. Your solution here is much cleaner and doesn’t look like a half finished product when installed.
@@ernestrowe5061 i also added a carbon fiber tube inside the shroud. Supper stiff, looks better and stil sound quit with the shroud on instead of fx tensioner without shroud
Why do you make these videos?? You don't respond to emails and nothing is ever listed on the website. Just saying. Would be helpful if we could get these
GM Mr. Rowe I’m interested in having my M3 .357 Tuned. And your Name is at the Top of Everyone’s List, when it comes to this Particular Task. Do you Offer this Service ?
@@ernestrowe5061 I am tuning a Maverick .30 cal so far mods that I have got include tungsten hammer, huma air dual air port trans., hammer spring upgrade for the maverick, Carbon fiber sleeve for .30 700mm barrel. I have always been a shooter of FX rifles but never attempted to tune one, but now I am. if you see any mods I need that I left out feel free to give me a list. The videos on youtube are spotty and not complete. I have 150 acres and the pigs are taking over I am looking to kill them more humane and with 1 shot so trying to get the FPE of the rifle maxed out. any wisdom you want to share or where I should start and with the best pellet. If I use a powder burner they stay gone and only come when I am not out, if I use my air rifles they leave and come right back with in 30 minutes.
Ernest Rowe i would like to have a 800mm barrel kit for the wildcat mk3 sniper and if possible the barrel tensioner kit to and when I'm at it the stock needs some improvements the butstockpad I wanted an upgrade for it and there is nothing on the market for the FX wildcat mk3 sniper I have the 22cal version with slug power kit already installed and would like to bring my wildcat mk3 sniper up to the next level please is there anything you guys at FX airguns can make our pas it on to someone that can I have more ideas to bring the airgun world up to the next level but no one hears me ow I almost forgot a monopod for the wildcat would be nice to I hope you see this message and can take it up from here please let me know if this reaches you to All wildcat owners please what do you think about this would this be something you would have to our am i the only one out here Greetings from the Netherlands
Ernest, I just now received my Tensioner kit from you. I have to tell you, this is absolutely stunningly gorgeous! I cannot wait to install on my M3! and secondly your new "Ernest Rowe" stickers are really cool! thank you very much for all you do for our community.
The barrel tensioner is pulling your barrel out damaging the rear part of the barrel the part that has the transferports and making it off its original place.
Awesome! Can't wait to see the version with the barrel tuner. Will they be available on your eBay or 910 tuning?
Ernest, do you have any updates on when these might be available? thank you.
These fx rifles require so many bandaids. Things that should have been thought out by the factory considering the price thats paid. No thanks
The only two things I hate about my Impact: 1) limp, spaghetti noodle "barrel" and 2) non-standard/high scope rail.
The STX liner is this most accurate barrel out there - but its not that stiff.
@@ernestrowe5061 and that's not really an issue anymore because of the carbon sleeves and barrel tensioner kits.
@@kirkbrode This is an evolving sport and equipment. Most other rifles do not compair to FX accuracy.
@@Slipstream28 yeah I started shooting air rifles in 1970. I'd say it's evolved a lot since then..
Ernest, please do a video on how to remove the factory fitted shroud. I can’t do it! Thanks.
Spin it off
Yeah you just spin it off lefty loose righty tighty
@@chrisfigueroa3361 have tried but it’s mighty tight and gripping the inner part is risky due to crush or scratch damage.
@@greggsevern3277 then you might have it crossed threaded on man be careful with that send it back before you make it worse sorry man
@@chrisfigueroa3361 i never got that far. I looked at it and didn’t know so I didn’t go any further. I can see holes in parts of it for a pin spanner but not sure if it’s all thread locked together. Have looked for videos on this but found nothing.
What's the problem with the 800mm barrel setup? I've been looking, and couldn't find it anywhere. When I first saw this , i thaught it was a dream come true. They say that it's no problem them to do a 800mm barrel. The fx MAVERICK SNIPER should be a perfect candidate for all calibers , not just 22. THe impact was in the limelight for quite some time. Its time to let us have at least some crums. Just baught my maverick, and I'm bummed out. 22 long?where is it brother?
There's no videos on how to remove the factory shroud and baffles. It's no doubt pretty simple procedure but it would be good to see it beforehand just in case there is something important to know first.
Shroud just unscrews. There are lots of videos of complete disassembly of these rifles and videos on changing the barrel kit. They all cover it
@@nsboost do the baffles stay in place or do I need to screw the end caps off.
@@michaelwilmshurst3663 there is no baffles just a airstripper and an endcap /-> long hollow tube
@@ernestrowe5061 ok thanks. The retailer that sold it to me said that fx offered baffles as an option and that they fitted them.
@@michaelwilmshurst3663 the baffles was for the FX tube silencer
So, where can I buy one of these?
Thanks.
Hi Ernest, Really enjoy your posts. Would just useing the carbon tensioner and my Donney FL Sumo or any other large capacity silencer to torque the tensioner avoiding the need for a shroud work?
Nice!
Hi Ernest. I love your videos. Have you got these shround in stock. Need to order a few asap. Kindly tell me when you'll sell them
Earnets, Is there a barrel tensioning kit for the FX Wildcat Mk III BT?
Mantap bang👍👍👍
Do you have a video before and after fitting the barrell tensioner? Would like to see if and in what ways this improves MOA grouping
No I don’t, all have tried said accuracy improved, just like my experience with the impact
@@ernestrowe5061 where can we purchase this?
@@roonimac www.bulletcentral.com/product/bc-custom-carbon-fiber-shroud-tensioner-kit/
Does this also fit on a wildcat mk3 bt sniper??
Kind regards! Keep on going whit your great vids!
Why are 700mm maverick barrels impossible to get? On back order everywhere. Why is this?
Mr. ROWE is it possible I can get the barrel tensioner kit for the maverick right now?
Ernest, thank you for the video. I would love to purchase a barrel tensioning kit from you for my Impact M3 .22 700mm. will you be making those available at anytime? thank you.
Hi available in late June at: www.bulletcentral.com
@@ernestrowe5061 thank you Ernest! I always appreciate your products!
Ernest, do you know what the O.D. of the kit will be for the Impact?
good morning Ernest. i have ordered your kit, but was wondering about a Barrel support with clamp? do you offer one? would your kit be compatible with the FX Clamp?
@@12VALVETORQUE -> Hi, indicate what type of barrel mount so you will get the proper tensioner length and BC have a shroud that fit over an FX tensioner also
These videos always come out so long before the product is available.. I lose interest in the product by the time I can actually buy it.
But this is exactly what I want for my impact. What’s the ETA on these?!
FX has one for the impact
Or buy directly to me
@@ernestrowe5061 unfortunately not while maintaining the shroud. Not that I’m aware of anyways. What I seen replaces the shroud with a skinny piece of carbon that looks silly and incomplete. Looks like the gun is missing something due to the obnoxious gap between the carbon and the scope rail.
Your solution here is much cleaner and doesn’t look like a half finished product when installed.
@@ernestrowe5061 I’d love to purchase my fx products from you! Let me know how to contact you
I’d like to buy one of these from you too. For a 700mm .22 Impact. How do we get a hold of you? Thanks, Stoti
I have te same setup as barrel tension for over a year
Me 2, look at my old video over a year ago, this new tensioner has a shroud. You have a CZcams video of your design a yearbook ago love to see!
@@ernestrowe5061 i also added a carbon fiber tube inside the shroud. Supper stiff, looks better and stil sound quit with the shroud on instead of fx tensioner without shroud
Are these available anywhere in Europe? i can't find them in any store.
Awesome!! When and where can I get this from? Amazing addition!
At: www.bulletcentral.com
In late june
@@ernestrowe5061 - and in Europe?
Where are can I find the shroud for the 800mm .22
Middle jun by me
Ernest! Will this available for the Wildcat mk3 bt in 700mm ?
Hi contact bulletcentral.com they can make one for you
I like this kit better. Can I purchase this one some where?
Just purchased mine.😄
Available at: www.bulletcentral.com/product/bc-custom-carbon-fiber-shroud-tensioner-kit/
Hi Earnest , can we order them from you ? do you have a online shop or Ebay site and can you ship to the UK , with thanks G.
Waiting on more CF tubes to make a batch maybe mid jun
@@ernestrowe5061
Hi thanks for getting back appreciated cheers G.
I want to buy this Shroud for my FX impact MKII .22 cal 700 mm barrel.
So how can I contact you?
Hi, you can purchase the shroud at bulletcentrial.com
where can i buy just the tensioner 4 my 700mm impact?
If you want to purchase just the 20x14mm cut to size and lap squared off ends-> erowe323@icloud.com
Why do you make these videos?? You don't respond to emails and nothing is ever listed on the website. Just saying. Would be helpful if we could get these
What site are these available to purchase on?
GM Mr. Rowe
I’m interested in having my M3 .357 Tuned.
And your Name is at the Top of Everyone’s List, when it comes to this Particular Task.
Do you Offer this Service ?
Hi, sorry I don’t provide tuning service. I recommend my apprentice.. 910airguntuningandrepairsllc.com
👍
Hi, where can I buy this kit for my Maverick
At: www.bulletcentral.com/product/bc-custom-carbon-fiber-shroud-tensioner-kit/
Could this fit Wildcat mk bt?
How can I get one
Where can we buy them once they're available for sale
At: www.bulletcentral.com
is this made for the .30 700mm and do u have a link to buy this
Hi, any caliber at: www.bulletcentral.com/product/bc-custom-carbon-fiber-shroud-tensioner-kit/
@@ernestrowe5061 I am tuning a Maverick .30 cal so far mods that I have got include tungsten hammer, huma air dual air port trans., hammer spring upgrade for the maverick, Carbon fiber sleeve for .30 700mm barrel. I have always been a shooter of FX rifles but never attempted to tune one, but now I am. if you see any mods I need that I left out feel free to give me a list. The videos on youtube are spotty and not complete. I have 150 acres and the pigs are taking over I am looking to kill them more humane and with 1 shot so trying to get the FPE of the rifle maxed out. any wisdom you want to share or where I should start and with the best pellet. If I use a powder burner they stay gone and only come when I am not out, if I use my air rifles they leave and come right back with in 30 minutes.
@@davidbraswell1481 remove 2nd reg replaced with hollow tube will total 160cc Plenum that will add another 50fps
@@ernestrowe5061 tyvm
Any news on this for the wildcat ?
Yes, middle june
That's awesome,,,will it be compatible with mk1/2/3
@@ernestrowe5061 do you have a date as yet ?
Ernest Rowe
i would like to have a 800mm barrel kit for the wildcat mk3 sniper and if possible the barrel tensioner kit to and when I'm at it the stock needs some improvements the butstockpad I wanted an upgrade for it and there is nothing on the market for the FX wildcat mk3 sniper I have the 22cal version with slug power kit already installed and would like to bring my wildcat mk3 sniper up to the next level please is there anything you guys at FX airguns can make our pas it on to someone that can I have more ideas to bring the airgun world up to the next level but no one hears me ow I almost forgot a monopod for the wildcat would be nice to I hope you see this message and can take it up from here please let me know if this reaches you
to All wildcat owners please what do you think about this would this be something you would have to our am i the only one out here
Greetings from the Netherlands
instagram.com/p/CfhigYwPU8x/?igshid=MDJmNzVkMjY=
Have you stopped your kalibragun vids now you are on the FX payroll ?
Don’t have any Kaibragun anymore
@@ernestrowe5061 shame,
They are very well made guns with superior barrels .
Enjoy your fx's