Holley Efi Staging setup. Both Terminator X software and v5.
Vložit
- čas přidán 16. 03. 2020
- Im hopeful that this video answers any and all questions on how to wire and program and setup the staging functions in both Holley Efi v5 software and Terminator x Software
- Auta a dopravní prostředky
I’m brand new to tuning and have to say between you and Joe Simpson I am a hell of a lot more informed than I was a week ago. Awesome stuff man, thank you!!
Damn I’m glad you release these videos. Helping me out a ton. Thanks for the content keep it coming
Wanted to say thanks Devin. Your directions on setting up smooth bump-in worked really well for me. On the street only staging around 3,700 rpm I had to lower my PWM to mid 50s to get movement, but it was very smooth. So bring on the 1 second reaction limit at Sick Week....
This is such a relief knowing how to setup my TB and bump function! Thank you sir.
Thank you so much. This is such invaluable information. Really like the 20v inputs so you can tie two inputs to a single output. Learned a bunch just with the difference between pwm negative and positive.
LOL that damn pointer! hahaha!! loving the new line up of vids man, definitely learning alot
I used the staging pulsing negative and it works perfectly
I enjoyed the magnet slapping
He was directly dissing you in the video
Man I did too
Dude you are hilarious,as always great video, thanks for the information you share.glad I got to meet you at piedmont.
Works perfect, not violent just eases right forward
Hey Devin,
Which way is better to wire the bump? The older video you made with the TB switch between the 12 volt source and the relay or this current way in this video?
Thanks for all the valuable videos!
Appreciate the video..... nice way to double check my work Thanks
Best video by far! Most asked question about Holley ever haha
That telescopic magnet got used more than all of ours at home did in its lifetime
Awesome thanks!
Appreciate the tutorials 👍
Thank you Devin another good informative video. I had a question, Holley sells the kit for TransBrake connections. I expect that it is for stray voltage or something. I bought one and I'm still not sure about it and don't see it in your diagram. PT# 554-128 TB Input Protection...???
Great content Devin !
This video is awesome keep it up dude
Awesome videos very helpful one question the black/yellow wire is that just tapped into a pwm wire also same for boost controller solenoid
Devin i got my new brake setup today exactly as you show but im having a strange issue. If i set the duty cycle on the bump above 72% it will not pulse the transbrake. Do you have any ideas on this?
if i have the terminator, regarding the (PWM -) coming from the SSR, should i hook it up to one the outputs and give it ground activation demand from the PCM?
I love this guy
Can you use the 20v in the canbus expansion with the terminator x?
Great video! I have one problem on my terminator x on inputs I only have 12v, So set my trans button to 12v and bump button 12v because. It doesn't give me the option for 20v. Can I set both to 12v and still work?
How would this work with a Jakes D1 Transbrake in an 4L80e? Any help would be greatly appreciated
Although it's nice having it all in the ecu.The leash electronics bump box is the best I've ever used.
have you ever used anything else
@@theholleyefiguy I've used Davis,smooth stage and tried the Holley right before I installed the Leash. I prefer the Leash. Once u fine tune the bump then u can program it to bump multiple times for one push of the button. Keeps u consistent and stops the car from rocking.Have u used the Leash one?
@@k20edef1 ive used them all. when done the way i set them up they dont bump, the creep. you hold the button and it slides into the second bulb. it also never has to be adjusted for leaving on more power or less.
Is there a way to make this work if I only have one boost solenoid
Use a pre wired Ls harness what’s best way to get the 12v and 20v input pulled?
How's your neighborhood with you testing the bump function on the cars you build? No retirees or young families I presume? Or is this in an industrial area?
I would like to use a delay box and have bump ....... can this be done ?
Great video i have the msd ssr that has 4 outputs pos or neg triggered will that work for transbrake/ bump it is pwm capable already have it so if i dont have to buy a new ssr
Thanks
He is cracking me up
Love the passive aggressiveness lol ❤️
So with this method do you not need to add in the 554-128 Module ? I know your older video you had it in there but that was a few years ago. Thanks for all the videos
No not with this method . Like I stated in this video and countless other times. The old video was how to ADD bump to an existing t brake install
@@theholleyefiguy ok was just double checking. I appreciate ya ;)
Love your video...
Have you looked into the MSD solid-state relay block? Any reason it would not work the same way if PWM ground controlled?
the new high current model works well for this
Can I run 2 step and line lock using the same button on terminator x?
Could I just use the MSD P#75643-HC solid state relay with multi channels and dedicate a channel to the trans brake? You can control the channel with a ground or a 12v source...
I dont have “bump button” on my Y Axis drop down to setup PWM for t brake
I wired everything up this way and bump button isn't working how can i test to see of ive got something crossed up or not right in the ecu
Probably a dumb question, but if you use the optional button power 12v do you tie the orange wire of the SSR into that off the ECU instead of battery power
No def not
How to set up the 12volt out from ecu?
is this still the way to wire in transbrake with dominator ecu and no 554-128
Fucking love it dude! Thanks for doing this! Nice converter
I like this dictator style teaching we need more of it in this world. Lmao see the problem we have is everyone wants instant gratification and they wont read the instructions. Lol it's not that difficult. At least that's my opinion. Read people read lol
How would you go about using the bump button as the scramble afterwards.
I’d be Leary about using the trans brake button even with the wheel speed qualifiers.
Advanced table. I made a video on it. Look thru my channel and you'll find it
@@theholleyefiguy I figured it out like 10 minutes after making this comment. Forgot to delete it. Thanks for all your videos man, massive help.
Hey Devin, I see WHY you used the 20v input for the bump button. But I was wondering, would it be okay to just use the 12v input. Let me explain why I ask. I use a scramble button (I know you hate that) and I only have the option of assigning that button 12v or ground. My scramble button and my bump button use the same button on my steering wheel as I've used boost leash in the past but am now switching to holley. Could I not just use a 12v input and split it at 6.5 is 85%, etc. Not sure if it matters but I run a 16v battery with an alternator. Thanks for the content man!
For anyone else who had this question. I figured out why you need the 20V input, you can not display a 12v input on the PWM x or y axis table. Guess I'm not running a scramble button anymore.
Use an advanced table to make a scramble with that same 20 volt input. I am positive I made a video on this
@@theholleyefiguy perfect, thanks man!
So would you say the Holley 554-128 isn’t necessary then?
I was wondering if he could do a video explaining why not to use 554-128
Im running the terminator x max, 4l80e trans with a Jakes D1 trans brake. Will the term x wiring work for my set up? I won't be adding the bump function.
did you have any luck ? im about to hook up a jakes d1 trans brake
I was wondering the same thing with jakes d3 without bump how to wire it
I love the sarcasm I had to pause the video so I could didn’t miss any thing. But I have terminator and use PWM out put and tie it to my TPS to control a PWM to roll in on the brake on the floor it’s 100% duty and as I roll off it starts to decrease till the car rolled forward then when I want to stop I push it to the floor agen and I’m staged.
Great video Devin! I followed your instructions to a T but I think I'm ahead of myself a little. I'm running the HP ecu. I set rev limiter #1 for launch RPM but where do I assign it to inputs....staging input #1 or staging input #2?
Will this be ok if brake is needed for reverse? Or is there anything elese I need to do? Thanks!
yes thats fine thats how all the pro brakes work
@@theholleyefiguy thanks. !!!!
Thanks bud
This is my first time ever messing with any kind of tuning but I have everything wired up just like the diagram and I’m setting it up in the software, where do I land the staging output? Does it land with the bump output or am I missing wiring something else as a separate output? It won’t let me pin map it with the bump output..
Same question I have. I don't understand how this enables the trans brake as well as the bump function when doing it on a TermX or doing V5 staging since you cant pin 2 outputs together. The way I understand it the TB would only ever be pulsed and never fully set, unless im missing something obvious im kinda stuck there.
czcams.com/video/4ofLWjLFVo8/video.html 6:30 - 8:30 in this video explained it a little better
@@YaM0MsAh03 it’s just one output, the bump input just pulses the transbrake.
@@YaM0MsAh03 when you setup staging it automatically creates the output and you just map it to whatever pin your transbrake is wired to…then the two inputs (brake/bump) control the one output. Transbrake button applies the solenoid and the bump button pulses the solenoid
@@YaM0MsAh03 I think lol I don’t have my computer in front of me or I could walk you through it
Like Patton with his troops
God I enjoyed this one lol.
I fuckin' like this guy
Professor when will the next class be so I can attend.
No need for 554-128?
You could have used a leash elecktronicks relay since you talked me into replacing all the junk ones I had with leash.Now if you can get Jon Dok to watch your vids he wont be calling you with noob questions.
Holy shit I can’t stop laughing at this intro!! Lol 😂
Lol I was just trying to be more of myself
@@theholleyefiguy do you have an email one can reach you at?
You said in the other video that Chinese relay was probably better than those relay?
I can just hear the phone calls.... i cant find a pink bump button with a purple and green wire....
I love the relay rant, I do industrial control work for a living and I just cringe every time I open a cabinet and see no name buttons and switches. Just buy the good stuff one time and be done with it.
New sub here from ls nasty!
No soup for you!!!!
You can’t have any pudding if ya don’t watch the whole video😤. Lol
Set up mine just like this and had no luck with it being functional
sounds like you screwed something up
Bad soild state relay😑
Hahahha... Dude! Cousins brothers uncle, wuhan china parts. You crack me up. You're a funny F'er.
hello Devin how can i contact you?
Devin@hcrinnovations.com
Don't laugh, you'll mess up the seriousness of the instruction!!!
Lol! Certified you tube mechanic, hahahhahaha
I got 1 question.....🤣
Love the videos! But for the non electrical idiots build a training wiring board showing everything in real world
Hey Devin did you grow up with nuns in a Catholic School like John Belushi and Dan Aykroyd in The Blues Brothers