Omggg I took my pc to a repair man to fix something and when it came back my led lights were not working! 😡This was the only video that actually helped! Thank youuu
MSI, what if we have both corsair rgb fans, and the Corsair RGB lighting node pro. is there anyway to hook them both together to control it with the mystic light software ?
so the jcorsair1 connector you put the rgb cables in? and than the power cable of the fans you put in the motherboard right? please correct me if im wrong
If you plug it in the corsair mb port, aren't u bypassing icue though? I have enough corsair stuff and the commander pro that I want to maintain icue running it
an impressive demo a question though for main fan power as it seems that corsair controller was only for RGB did this demo use a daisy chain method or a separate controller for the fan's main power?
Very true.... between my h100i platinum se AIO , commander pro, rgb fan hub, and 5x LL120's the amount of wires is crazy but i still planning on adding some QL140's which would need yet another fan hub and if I want an led port for led strips on top of all that I would need to hook up lighting node pro as well.....the amount of wiring to do all that = rats nest
I've been seeing the question about the cable used in the beginning and I too came here with the same problem. I wanted to connect two fans that were plugged into the 6-port rgb hub, and then plug that hub into the JCorsair1 header. The answer is that the cable is proprietary and Corsair ONLY sells it with the Lighting Node Pro and the Commander Pro. They do NOT sell it alone. However, lots of 3rd party places do. Here is a link where you can buy it (I just bought mine there). www.ebay.com/itm/Corsair-RGB-Fan-LED-Hub-Cable-12-inch-Corsair-Style/372475062929?hash=item56b93e6a91:g:OTAAAOSwVEVb3f3H Again, this should only work if you have a corsair header on your mobo, otherwise you need to unfortuntely shell out for the overpriced lighting or commander pro.
And I thought I got a bargain getting the 10 dollar corsair hub. Nope. Gotta not include a key piece you can only get in our vastly more expensive products. Kinda stupid tbh.
@@Zokmonkey Yeah, I had no problems with it. That's not to say that there's no chance it'll come defective though. The real danger with third party cables is consistency in manufacturing. But I didn't have any problems and I'm still using it.
Can you use iCUE if you have the Corsair RGB Fan LED Hub plugged into the motherboard? Or only the MSI software and you need to use a Corsair Lighting Node in order to use iCUE?
Wait, so the fans represented in this video are LL120s? Also, you can’t use a lightning node led strip at the same time or is there a jcorsair splitter that makes it possible? Also are you able to sync the aio fans with the rest or do they need to be connected to the pump?
Does it work if I plug in the header from lighting node pro to the jcorsair1? Beside 4 case fans, I also have Corsair RGB LED strips, at the moment I plugged everything into the lighting node pro and from that, I connect it to the motherboard (MSI Z170 USB header). I'm upgrading to Ryzen 7 and MSIX470 Pro Carbon motherboard
I'm setting mine up now does buying the additional wire still allow you to control the color of the lights or do I need the Lighting Node Pro to do that?
I NEED HELP - What is you don't have a Corsair connector on the motherboard, but only have a rainbow connector and an RGB connecter. Which one would you choose?
Do these fans light up immediately after the computer is first started or do they need to be configured in the application first? I have a problem because mine is spinning but not lighting (it's my new computer and I don't have Windows working yet so I wonder)
If i had a case with rgb fans and the fans have 2 wires the first one connected to the power supply unit the 2nd one should i buy something like the one in the video?
Hi, this video is amazing, how easy can be, but I would like to know if I can use any of the motherboards to make this connection or only on msi motherboard seeing that jcorsair connector. Thank you
So i got the RGB fan hub, the same one that you have on a video, but my actual problem is that i dont have a cable that connects it to the motherboard, because it didnt come with one. Was it supposed to? And if it doesn't come with it, where to get it? I have bought the fans and a new AIO cooler 9 months ago, and they where in my closet all the time, untill recently i have finally come around to upgrading my CPU and my Motherboard, and now I'm stuck with 6 RGB fans from corsair that don't light up, because i dont have 1 cable. Bugs me out very much
I don't have that cable that you put in the RGB hub for the 11 seconds, what's that cable called and where can I order it. good video. I hope for a reply
buy the kit that comes with the full set remove the led hub and just connect the cable directly to that motherboard header. use the 6 fan hub in the kit but not the 2 led fan controller
I have a MSI ageis RS pre built with the i7 10700f and the 2070 super rtx. I was trying to figure this out but couldn’t, do I have to take the pc back apart and plug these in or do they already come installed and put together?
So i dont need a corsair commander pro or other extra port to let thr fans spin? I bought a set of 3 but i though i needed to hook up the second fan connector to a second hub.
I have a Corsair H100i RGB Platinum SE that is plugged in and working as it should with the iCue software but I dont have an extra slot for a spare Corsair RGB fan I bought to match the build, Do I have to buy this little hub or is there another way?
Whats the exact model of the RGB fan hub?? I've been looking everywhere trying to find which one has a 3 pin connector rather than the 9 pin usb than mine has. Thanks
Where can I find the JCorsair1 cable, I’ve seen them online but with only two wires, in your video they have 3 wires. Is it still the same cable they state that they’re JCorsair1 cables but I just don’t understand why I can only find the one with two wires running to each end when yours has 3?
So if I'm connecting my 3 fans to a hub (the little black thing that receives signals) then I connect the hub to the psu and what else? Also if I have 1 fan header on the motherboard but rgb fans like this do I need a splitter?
@@muneef_8 if your mobo doesn’t have the JCORSAIR1 plug in the. connect it to the hub and connect the usb cable from the hub to your mobo. SO MANY WIRES
I have a b450 gaming plus motherboard which has no jcorsair 1 socket, will I still be able to plug in my hd140 rgb case fans to the motherboard somehow? The original rgb hub that I have is a 3 pin d.c made by msi. The case I have is the gungnir 100. TIA .
Hello, I have a question, I have an MSI motherboard, model 2017-2018 B450 aPro. I wanted to know if the Corsair Lighting Node with led strips is compatible with my motherboard, because I see that it connects to some pins, at the top near the ram memory banks and then to a sata connector (I have the corsair power supply too)
Okay So if I buy Corsair ML140RGB and if I want to use motherboard RGB Pins for lightning it up And for Fans If I use chassis header on case Will it work normally??
Corey Fennell nice :) Last year I ordered the 3 pack ll fan from Amazon and in march the 465x case :) All fans are connected to the Lighting Node Core of the case and work perfectly :) Runs perfectly with the Icue Software :) But maybe I will need the cable sometime anyway!
Should my motherboard have an LED hub port because it doesnt. I have a GIGABYTE X470 AORUS Ultra Gaming board. Are there any alternatives tho this little issue?
so i going to buy the LL120 but im confused on one thing i cant afford the hub and i really want the fan specially since its a 25$ fan on amazon i was wondering if i could directly attach the rgb connector to the motherboard directly i remember seeing on the motherboard a 4 pin area near the bottom above some of the usb connectors which i just checked to make sure but im not sure if its possible because i havent seen the actually pin look of the rgb connector could you guys clarify please otherwise ill have to chip in some money sadly ;-; im so poor lol or maybe use the JCORSAIR1 connector that you used becuase i think the hub just allows you to connect more rgb fans?
I have exactly this configuration but with HD120 / 140 fans. The mystic light program is not perfectly implemented so much that sometimes they conflict with the LEDs on the motherboard. The options are very few to customize these beautiful fans and when you restart the settings are not stored. I'm undecided whether to attach the remote control in equipment and let go of mystic light, or better to use it only for the LEDs on the card. If the corsair app worked via jcorsair connector without commander pro would be affixed.
Bl4ckBoyZ Hey, im buying z370 board with jcorsair amd ll120 fans. Do you maybe know if rgb control with mystic light is also same as good as with corsair link?
Sergio situation improved with the latest version of mystic light, some problems still persist but nothing to worry about. surely the best way to manage everything is with JRGB connectors. the problem of keeping the LEDs off even at the next PC restart persists. brightness of the fans makes you forget the problems, excellent.
Bl4ckBoyZ Yeh those fans, rgb Ram and motherboard should be enough inside case. I think il just connect led strips but use them outside pc to light up desk. But im afraid 74 leds supported to motherboard or max 4 corsair led strips in one channel will not be enough. Im also wondering if it is possible to use other adressable led strips (the ones you buy o roll) that are mich cheaper to jrainbow slot.
This is the first and only video I found about this header on MSI boards. None of the CZcamsrs are showing it
Do you know what cable is the one they connect first?
@@Salt0719 it's the led controller cable. It came with my pair of hd fans.
I don’t even have this header on my mobo lmao
Think they changed it to jrainbow
FINALLY, a video that shows exactly what I wanted, thank you!!!
What is this motherboard's name?
@@hintiminti msi pro carbon b450
Can you please tell me that the wire he put in the device ( 0:09 ), does it come with it?
IKRR finally something that doesnt skip steps
What the heck is the port on motherboard that he plugged the cable into? It just sais corsair ffs.. my asus mb doesn’t have that.
Wow I love how its straight to the point, clear and easy. Jeez thanks, really. I appreciate this a lot.
Where I can purchase the connector that connects from the jcorsair to the motherboard?
Bro i you buy a pack of three corsair rgb fabs there will be a connector included in that box
finally found a useful video that wouldn't talk about any irrelevant stuff
This video saved my life, I was so confused about the fans, not anymore thanks to this.
This is what I exactly needed! Thank you so much!
Great video. I was finding this tutorial but thanks to msi ♥
This is a lot more simple than I thought. Thank GOODNESS Computer building has become easier for us noobs. =) Video was excellent!
DreamyAbaddon i don’t get it :(
Why couldn’t the other videos be this easy. Thank you!
Omggg I took my pc to a repair man to fix something and when it came back my led lights were not working! 😡This was the only video that actually helped! Thank youuu
hey, do you control the lights through icue or mystic?
@@mrsaltybacon5458 No there is a button to turn them on and off but I’ve never tried to change that color because I like the default color they are.
YES yes, the only channel that showed how it pops congratulations
So you connect 1 end of the cable from the fan the the fan hub, and the other cable to a fan header on the motherboard?
Wow..such a clean video with good lighting..thank you very much..you got yourself a subscriber here..
MSI, what if we have both corsair rgb fans, and the Corsair RGB lighting node pro. is there anyway to hook them both together to control it with the mystic light software ?
so the jcorsair1 connector you put the rgb cables in? and than the power cable of the fans you put in the motherboard right?
please correct me if im wrong
If you plug it in the corsair mb port, aren't u bypassing icue though? I have enough corsair stuff and the commander pro that I want to maintain icue running it
Great 👍 vid straight to the point great illustration just what I wanted know🙂
hi what is the name of that cable you plugged in from the controller to the motherboard so i can buy one online thanks ? I have this same motherboard.
Thank you so much! very helpful!
Absolutely farcical how many wires these need
yeah thats why I just can't get my self to install it. Just too much cables all around my case.
They should developed a daisychained system
right lol
an impressive demo a question though for main fan power as it seems that corsair controller was only for RGB did this demo use a daisy chain method or a separate controller for the fan's main power?
THANK YOU THANK YOU THANK YOU! I HAD NO IDEA WHERE THE SATA CABLE WENT BUT THANK YOU!
Didn't you have a user's manual?
Top vid well made. The best on the subject around
I love the soft soothing background music to distract you from the horrendous MESS from all the cables these fans have
Very true.... between my h100i platinum se AIO , commander pro, rgb fan hub, and 5x LL120's the amount of wires is crazy but i still planning on adding some QL140's which would need yet another fan hub and if I want an led port for led strips on top of all that I would need to hook up lighting node pro as well.....the amount of wiring to do all that = rats nest
I've been seeing the question about the cable used in the beginning and I too came here with the same problem. I wanted to connect two fans that were plugged into the 6-port rgb hub, and then plug that hub into the JCorsair1 header. The answer is that the cable is proprietary and Corsair ONLY sells it with the Lighting Node Pro and the Commander Pro. They do NOT sell it alone. However, lots of 3rd party places do. Here is a link where you can buy it (I just bought mine there). www.ebay.com/itm/Corsair-RGB-Fan-LED-Hub-Cable-12-inch-Corsair-Style/372475062929?hash=item56b93e6a91:g:OTAAAOSwVEVb3f3H
Again, this should only work if you have a corsair header on your mobo, otherwise you need to unfortuntely shell out for the overpriced lighting or commander pro.
Thank you dude I was frantically looking for it and couldn’t find it thought I lost it
I also need that cable, and I can't find it in Germany
And I thought I got a bargain getting the 10 dollar corsair hub.
Nope. Gotta not include a key piece you can only get in our vastly more expensive products.
Kinda stupid tbh.
@@chromarush1749 ive needed one for 8 months i just bought it, does it work good?
@@Zokmonkey Yeah, I had no problems with it.
That's not to say that there's no chance it'll come defective though.
The real danger with third party cables is consistency in manufacturing.
But I didn't have any problems and I'm still using it.
Thank you so much msi ... your big fan 😘😘😘
pun intended?
Can you use iCUE if you have the Corsair RGB Fan LED Hub plugged into the motherboard?
Or only the MSI software and you need to use a Corsair Lighting Node in order to use iCUE?
I don’t know I am trying to find the cable to connect to the commander
Where do I find a cable replacement for this?
I didnt even know this was a thing until I just now noticed it on my motherboard and googled it to see what it was
From where do you have the cable to connect the hub white the motherboard?
how do you adjust the fan speed? i want to increase airflow coming in from the front and exhausting at the back and top
does ist works with the SP120 rgb fans?
Wait, so the fans represented in this video are LL120s? Also, you can’t use a lightning node led strip at the same time or is there a jcorsair splitter that makes it possible? Also are you able to sync the aio fans with the rest or do they need to be connected to the pump?
Does it work if I plug in the header from lighting node pro to the jcorsair1? Beside 4 case fans, I also have Corsair RGB LED strips, at the moment I plugged everything into the lighting node pro and from that, I connect it to the motherboard (MSI Z170 USB header). I'm upgrading to Ryzen 7 and MSIX470 Pro Carbon motherboard
that connector doesnt seem to be on the z270-A pro. Any tips for RGB lighting including cpu cooler and case fans?
You just hook the Lighting Node PRO up to your internal USB port. Then from there it's the same as in this video.
I got shivers. It was so simple.
I'm setting mine up now does buying the additional wire still allow you to control the color of the lights or do I need the Lighting Node Pro to do that?
So the MSI board doesn't require the Corsair controller that changes fan speed/lights etc?
Thank you very much this helped allot
Is there a software update to increase the color effects? Corsair's program is much more complete
Thank you
I NEED HELP - What is you don't have a Corsair connector on the motherboard, but only have a rainbow connector and an RGB connecter. Which one would you choose?
Do these fans light up immediately after the computer is first started or do they need to be configured in the application first? I have a problem because mine is spinning but not lighting (it's my new computer and I don't have Windows working yet so I wonder)
Hello I have 2 questions :
Can I connect a single corsaire HD140 fan directly to the JCORSAIR1 ?
If yes will it be sync with mystic light ? Thanks
No and no
exactly my question and the answer is quite disapointing.
Why cant you just connect one fan without the Corsair device?
thanks, i needed this
If i had a case with rgb fans and the fans have 2 wires the first one connected to the power supply unit the 2nd one should i buy something like the one in the video?
Hi, this video is amazing, how easy can be, but I would like to know if I can use any of the motherboards to make this connection or only on msi motherboard seeing that jcorsair connector. Thank you
So i got the RGB fan hub, the same one that you have on a video, but my actual problem is that i dont have a cable that connects it to the motherboard, because it didnt come with one. Was it supposed to? And if it doesn't come with it, where to get it? I have bought the fans and a new AIO cooler 9 months ago, and they where in my closet all the time, untill recently i have finally come around to upgrading my CPU and my Motherboard, and now I'm stuck with 6 RGB fans from corsair that don't light up, because i dont have 1 cable. Bugs me out very much
Hi! i have the Lianli 011 case and want to have 12 corsair fans linked, can i use multple corsair hubs one a single mobo?
I don't have that cable that you put in the RGB hub for the 11 seconds, what's that cable called and where can I order it. good video. I hope for a reply
I have the same question lol. It doesn't come with the product.
It'd be nice if he put part names in the desc.
hello "Gigabite B450M DS3H"does it work on a motherboard?pls help!
On God, that's the most convenient thing since bios flashback
Wait, so is the cable included with MSI motherboards for the corsair plug on the motherboard compatible with all Corsair lighting nodes or what?
No. Its the opposite. It eliminates the use of lightning node, so you jut need to plug the lighting hub to the motherboard
buy the kit that comes with the full set remove the led hub and just connect the cable directly to that motherboard header. use the 6 fan hub in the kit but not the 2 led fan controller
@@xs3tsunax not really you only have 1 port the node pro does same per usb Connection
I needed this badly
I have a MSI ageis RS pre built with the i7 10700f and the 2070 super rtx. I was trying to figure this out but couldn’t, do I have to take the pc back apart and plug these in or do they already come installed and put together?
What’s the first cable called? My RGB hub just came with only the Sata power
Dont have it etiher
So i dont need a corsair commander pro or other extra port to let thr fans spin? I bought a set of 3 but i though i needed to hook up the second fan connector to a second hub.
Are you able to control the corsair RGB fans with MSI mystic light or iCUE.
do you need a commander pro when you have got a msi x470 gaming pro carbon to setup the lightnings of like 6 fans?
This hub works on Asus rog Z370h Gaming ? and also can i plug cooler rgb to this hub ?
please answer if u can. so i don’t have the usb cord to connect the rgb hub. is it possible i can buy one and it will fit? if so which one.
Please tell me where to connect the right corsair fans to the MSI mag tomahawk z390 motherboard
I have a Corsair H100i RGB Platinum SE that is plugged in and working as it should with the iCue software but I dont have an extra slot for a spare Corsair RGB fan I bought to match the build, Do I have to buy this little hub or is there another way?
Answer which is more powerful 12Volt header or 5volt? And does Msi B450 Tomahawk max has both?
Whats the exact model of the RGB fan hub?? I've been looking everywhere trying to find which one has a 3 pin connector rather than the 9 pin usb than mine has. Thanks
Does this work with an MSI Z270-A PRO motherboard? I've been having no luck finding answers on if I can get my corsair RGB fans in.
Tristan Mckean if it has a jcorsair connector sure
Can you take the sata connection on the motherboard ? or only from the power supply ? thx
Di you actually connect all your fan in the syt fan on motherboard?
Where can I find the JCorsair1 cable, I’ve seen them online but with only two wires, in your video they have 3 wires. Is it still the same cable they state that they’re JCorsair1 cables but I just don’t understand why I can only find the one with two wires running to each end when yours has 3?
So if I'm connecting my 3 fans to a hub (the little black thing that receives signals) then I connect the hub to the psu and what else? Also if I have 1 fan header on the motherboard but rgb fans like this do I need a splitter?
can you still do this with a the Commander core and a Z790 motherboard?
Budy is building a pc and just ran into the issue of not having the sata cable female end on the board is that a power supply end?
can you link the cable from the JCORSAIR1 to the corsair hub?
Did you find it ?
@@muneef_8 if your mobo doesn’t have the JCORSAIR1 plug in the. connect it to the hub and connect the usb cable from the hub to your mobo. SO MANY WIRES
Works just as the video depicts. You just have to download the driver in the dragon center. Then it syncs with Mystic
Michael Bailey 🙏
What driver? Ive looked and i dont see any thing to download. Ive connected it exactly as video said and lights do not come on
So do you use mystic lighting to control everything or Icue?
So a total waste of fucking time then.
Mystic light
@@FLASH2004. have u tried it?
@@LordsZone My firend did it
I have an Asus board so I can't do it
I have a b450 gaming plus motherboard which has no jcorsair 1 socket, will I still be able to plug in my hd140 rgb case fans to the motherboard somehow? The original rgb hub that I have is a 3 pin d.c made by msi. The case I have is the gungnir 100. TIA .
Hello, I have a question, I have an MSI motherboard, model 2017-2018 B450 aPro. I wanted to know if the Corsair Lighting Node with led strips is compatible with my motherboard, because I see that it connects to some pins, at the top near the ram memory banks and then to a sata connector (I have the corsair power supply too)
Can I connect single rgb fan/led-strip directly without the hub?
thanks! this video is good without too much talking non sense xD
Hey bro you used 2 sockets in motherboard for fans so where do you plug in your cpu rgb light switch?
In the CPU rgb socket
if we used a splitter for each 4 pins of the fans to connect to only 1 fan input of the mobo, would it be the same?
Okay
So if I buy Corsair ML140RGB
and if I want to use motherboard RGB Pins for lightning it up
And for Fans
If I use chassis header on case
Will it work normally??
can you connect a corsair fan with rgb without the lighting node? or is it really that necessary?
i haven´t the cable to connect the hub with my mainboard
can you help me to find it?
please send me a link that i can buy it
thanks
bump
www.google.co.uk/amp/s/www.overclockers.co.uk/corsair-jcorsair-rgb-cable-for-msi-motherboards-fg-077-cs.html%3ftemplate=amp
Corey Fennell Thanks! :)
Rasplat no problem! Literally just installed mine today!
Corey Fennell nice :) Last year I ordered the 3 pack ll fan from Amazon and in march the 465x case :)
All fans are connected to the Lighting Node Core of the case and work perfectly :) Runs perfectly with the Icue Software :)
But maybe I will need the cable sometime anyway!
Is there an corsair connector on the b550 Gaming plus board
Should my motherboard have an LED hub port because it doesnt. I have a GIGABYTE X470 AORUS Ultra Gaming board. Are there any alternatives tho this little issue?
do you need the cable you plug in infront of the R in the corsair name cause i didnt get it when i ordered a rgb hub does it come with the order
so i going to buy the LL120 but im confused on one thing i cant afford the hub and i really want the fan specially since its a 25$ fan on amazon i was wondering if i could directly attach the rgb connector to the motherboard directly i remember seeing on the motherboard a 4 pin area near the bottom above some of the usb connectors which i just checked to make sure but im not sure if its possible because i havent seen the actually pin look of the rgb connector could you guys clarify please otherwise ill have to chip in some money sadly ;-; im so poor lol or maybe use the JCORSAIR1 connector that you used becuase i think the hub just allows you to connect more rgb fans?
Can we connect the corsair fan RGB conector directly to the motherboard without the hub???
what if I connect a single CORSAIR LL Series, LL120 RGB, 120mm RGB LED Fan ?? will it light up If I change it
Does allow you to control corsair fans with MSI software or MSI motherboard lights with corsair software?
do i need the corsair rgb hub to sync it to mystic light, am planning to only buy 1 corsir ll120
Corsair and msi go together like bread and jam. They aren't the same company but they did partner up not long ago
May someone know, if can I control the lights effects without the commander? Only connecting the fan directly to the board
Does the B550M tomahawk max wifi have that weird header on it? I couldn't find it on mine but maybe I'm just missing it.
I have exactly this configuration but with HD120 / 140 fans. The mystic light program is not perfectly implemented so much that sometimes they conflict with the LEDs on the motherboard. The options are very few to customize these beautiful fans and when you restart the settings are not stored.
I'm undecided whether to attach the remote control in equipment and let go of mystic light, or better to use it only for the LEDs on the card.
If the corsair app worked via jcorsair connector without commander pro would be affixed.
Bl4ckBoyZ Hey, im buying z370 board with jcorsair amd ll120 fans. Do you maybe know if rgb control with mystic light is also same as good as with corsair link?
Sergio situation improved with the latest version of mystic light, some problems still persist but nothing to worry about. surely the best way to manage everything is with JRGB connectors. the problem of keeping the LEDs off even at the next PC restart persists. brightness of the fans makes you forget the problems, excellent.
Bl4ckBoyZ Yeh those fans, rgb Ram and motherboard should be enough inside case. I think il just connect led strips but use them outside pc to light up desk. But im afraid 74 leds supported to motherboard or max 4 corsair led strips in one channel will not be enough. Im also wondering if it is possible to use other adressable led strips (the ones you buy o roll) that are mich cheaper to jrainbow slot.
Do you need that little hub???? Or no can I use a single rgb fan and plug it directly into the header ?
does msi b450m pro m2 v2 support anothers color for jled1? i put led strip but cant change the color,just red on setting mystic light 3
does the editor in dragon center or the ROG command center still work as expected?
Does every power supply have this connector for the sata power cable?