Big fan of the Go Stream Deck and can't wait till we get a European release. However this looks like something cobbled together in someone's garage. The finish on the pelican style case looks rough, particularly around the power input. I much prefer the style of the AVMatrix all in one solutions.
Thank you for the feedback and support on the channel. No we can not record each individual hdmi channel to the SD card like the ATEM mini pro iso. We can only record one at a time. You can go within the menu settings and select what input source you want the sd card to record.
Hey bro, NDI list is the list of NDI camera that are available. So basically instead of connecting your camera to this video switcher via hdmi. you can wirelessly connect your cameras to this switcher via NDI. If you provide each camera with an ethernet network cable connection that will provide the camera and the video switcher to be on the same network IP address. hope this helps to better understand NDI and NDI list. The list is just a list of the cameras you have a available to pick from that are connected via NDI wirelessly as they will be on the same IP network as the switcher.
Awesome video. Really well done. Very informative. This live streaming video switcher kit looks like a great option. Where is the best place to order it?
Hey all! I recently got the deck and after successfully connecting my sony fx3 to the osee deck via an HDMI cable the first time around, now it doesn't register on the switcher. Wondering if anyone else has had this issue, and if so, what's the solve was?
Hey Eric Nice to meet you. Thank you for your feedback and support on my channel. Much appreciated. I don’t own the Sony fx3 but I can take a few guesses or maybe solutions that might help. - Set your fx3 to 1080p. Don’t use 4k on the fx3. - I would double check to see if your fx3 is set to 60hz and not 50hz. This may vary depending where you live. 60hz works for me in Canada. - maybe try a different hdmi cable - make sure slow motion / variable frame rate is Off in the camera settings. - try plugging into a different hdmi input on the gostream deck kit. - make sure the gostream deck kit is running the latest firmware update. - if the above doesn’t work then I would go in the GoStream deck menu settings and reset to factory settings within the menu. Maybe you touched a setting that now wont let your camera be displayed. - if it still doesn’t work I would have a look at this document which is FAQ frequently asked questions document. Maybe you can find your answer here. Hope these tips help. I would also suggest for you to join the Osee GoStream deck user group on Facebook. But before you ask your question in the group be sure to check the document link I included above. Have a good day Talk soon.
Oh yes I have been still liking it. Osee just keeps updating the firmware and it keeps getting better. They just released a PC software that will allow us to easily control the switcher from the PC. And I believe soon we will be able to record the livestream to a ssd or a SD card. I should be releasing a new video in a few weeks
This is great and all but I can’t get my ghost stream deck to stream live for the life of me. I’ve spent a week trying to figure this out. Can you please make a video with step-by-step instructions on getting this up and running I’m using the latest update, 1.0.5. The instructions are not very clear and I can’t find anything online. Nothing I’ve tried his work and I’m trying to everything I can think of.
@idjmic yes I agree with you. It does look like it was cut by hand. In my opinion the case it self is most likely made from another company and it is just a stand general hard case. Then Osee probably bought some from that company and custom fit the hard case to fit the GoStream deck. I think the cut is just a rough cut from Osee’s behalf. Agree with you. Good eye. I also noticed this when I was first using it.
Is there a way to setup some sort of Instant Replay using it's Macro capability? Is the most recent recording available for quick replay or you need to menu down and select? Mahalo!
Hey there. For quick and easy playback of the video that was just recorded onto the sd card. You can enter the menu and easily scroll to that recorded video file. Or you can press the forward or back buttons beside the play button and that will also allow you to select which video you want to play. I haven’t tried setting this up as a macro feature but I wouldn’t be surprised if it can be done if we program it to do that. I would reach out to Osee directly to get a clear answer in regards to the macro programming of this feature you are looking for. Maybe if they have enough requests, Osee may add this in a future firmware update. Awesome switch though regardless. Been loving it.
For those of us who have already purchased a deck, is there an option to just get the case unit and instructions as to hooking the deck into thecase? Thanks!
Many thanks for a great overview of this fabulous piece of kit.... I do soooo want one!
No problem at all.
Love mine
Great review.
Thank you very much Monte. Much appreciated for the support. 💯💪🎥
NDI license is NOT included with the GoStream Deck Kit.
Big fan of the Go Stream Deck and can't wait till we get a European release. However this looks like something cobbled together in someone's garage. The finish on the pelican style case looks rough, particularly around the power input. I much prefer the style of the AVMatrix all in one solutions.
I know what you mean. Yes it looks like a rough cut at the back of the kit.
But nothing concerning for me.
Awesome! Does it record the video input files individually on the SD card like the ATEM Mini Pro ISO??
Thank you for the feedback and support on the channel.
No we can not record each individual hdmi channel to the SD card like the ATEM mini pro iso. We can only record one at a time. You can go within the menu settings and select what input source you want the sd card to record.
Isn't that NDI license a courtesy gesture for you from OSEE? Did you clarify that with them?
Yes you are correct. The NDI license key is NOT included with the kit. The NDI license key needs to be purchased separately.
Great review. Looks like an awesome product. What is a NDI list ? Fam.
Hey bro, NDI list is the list of NDI camera that are available. So basically instead of connecting your camera to this video switcher via hdmi. you can wirelessly connect your cameras to this switcher via NDI. If you provide each camera with an ethernet network cable connection that will provide the camera and the video switcher to be on the same network IP address. hope this helps to better understand NDI and NDI list. The list is just a list of the cameras you have a available to pick from that are connected via NDI wirelessly as they will be on the same IP network as the switcher.
Awesome video. Really well done. Very informative. This live streaming video switcher kit looks like a great option. Where is the best place to order it?
You can order on Amazon or directly from Osee website
Hey all!
I recently got the deck and after successfully connecting my sony fx3 to the osee deck via an HDMI cable the first time around, now it doesn't register on the switcher. Wondering if anyone else has had this issue, and if so, what's the solve was?
Hey Eric
Nice to meet you.
Thank you for your feedback and support on my channel.
Much appreciated.
I don’t own the Sony fx3 but I can take a few guesses or maybe solutions that might help.
- Set your fx3 to 1080p. Don’t use 4k on the fx3.
- I would double check to see if your fx3 is set to 60hz and not 50hz. This may vary depending where you live.
60hz works for me in Canada.
- maybe try a different hdmi cable
- make sure slow motion / variable frame rate is Off in the camera settings.
- try plugging into a different hdmi input on the gostream deck kit.
- make sure the gostream deck kit is running the latest firmware update.
- if the above doesn’t work then I would go in the GoStream deck menu settings and reset to factory settings within the menu. Maybe you touched a setting that now wont let your camera be displayed.
- if it still doesn’t work I would have a look at this document which is FAQ frequently asked questions document.
Maybe you can find your answer here.
Hope these tips help.
I would also suggest for you to join the Osee GoStream deck user group on Facebook.
But before you ask your question in the group be sure to check the document link I included above.
Have a good day
Talk soon.
Any update? How have you been liking the Osee GoStream Deck Kit?
Oh yes I have been still liking it. Osee just keeps updating the firmware and it keeps getting better. They just released a PC software that will allow us to easily control the switcher from the PC. And I believe soon we will be able to record the livestream to a ssd or a SD card. I should be releasing a new video in a few weeks
This is great and all but I can’t get my ghost stream deck to stream live for the life of me. I’ve spent a week trying to figure this out. Can you please make a video with step-by-step instructions on getting this up and running I’m using the latest update, 1.0.5. The instructions are not very clear and I can’t find anything online. Nothing I’ve tried his work and I’m trying to everything I can think of.
Have you figured it out yet?
I’ll plan to make a video specifically to answer your question asap.
Why is the case cut out at the back where power goes? 😮
Because it is custom made to fit the GoStream deck switcher. That is how it came right out of the box.
@@LeoPazzo interesting in the video it just like it was hand cut.
@idjmic yes I agree with you. It does look like it was cut by hand.
In my opinion the case it self is most likely made from another company and it is just a stand general hard case. Then Osee probably bought some from that company and custom fit the hard case to fit the GoStream deck. I think the cut is just a rough cut from Osee’s behalf. Agree with you. Good eye. I also noticed this when I was first using it.
Is there a way to setup some sort of Instant Replay using it's Macro capability? Is the most recent recording available for quick replay or you need to menu down and select? Mahalo!
Hey there.
For quick and easy playback of the video that was just recorded onto the sd card.
You can enter the menu and easily scroll to that recorded video file.
Or you can press the forward or back buttons beside the play button and that will also allow you to select which video you want to play. I haven’t tried setting this up as a macro feature but I wouldn’t be surprised if it can be done if we program it to do that. I would reach out to Osee directly to get a clear answer in regards to the macro programming of this feature you are looking for. Maybe if they have enough requests, Osee may add this in a future firmware update.
Awesome switch though regardless. Been loving it.
@@LeoPazzo Mahalo for the quick response and info! Aloha!
No problem. 💪💯🎥
can i use this in a zoom meeting/webinar
Yes you sure can.
You can connect it to your pc via the USBc output from the back of the GoStream deck video switcher.
For those of us who have already purchased a deck, is there an option to just get the case unit and instructions as to hooking the deck into thecase? Thanks!
At the moment no.
But I wouldn’t be surprised if Osee makes something in the near future.
Can an ATEM mini also be used in that case?
I don’t think so.
This case is custom made for the Osee GoStream deck video switcher.
Is this an encoder or not?
You said “Gostream Deck” 5,287 times in this video. It’s a bit much.
Oh well what can you do. That’s the product I’m talking about.
What is your suggestion?
@@LeoPazzo My suggestion is that you don't constantly keep saying the name!
@@samuraiintellectualgot yea