Five Minute Fix 55 - Brake Booster Check Valve Testing and Replacement 1997 Ford E-150 Econoline Van
Vložit
- čas přidán 26. 05. 2024
- Welcome! In this Five Minute Fix video I show how to remove, test and replace the check valve of a power brake booster on my 1997 Ford E-150 Econoline Van named Engima. I know that I have a leak in my power brake booster system somewhere, so this is the fast and cheap first step to finding out where the problem is. Ultimately the valve is good, the booster itself is bad.
Want to see more videos? Visit my channel below!
/ @mazdab3k
WARNING! This video is for entertainment purposes only. Do the actions outlined in this video at home at your own risk.
Want more? Become a member of my channel!:
/ @mazdab3k - Auta a dopravní prostředky
Thanks for the video!
This video is doing surprisingly well. Who knew that the Internet wanted to see me blow into a check valve? I have also released the companion video to this where I replace the power brake booster.
Clean and treat the grommet with wd-40.
It works great on rubber. If you are changing an old tire for a used one, treat around and clean the tire that touches metal. You will see the difference. It may not a permanent solution but a good quick fix. Try it on some rubber product
I'll keep that in mind. In this case the booster was definitely bad. I don't have the video up yet, but I've changed it out and it is now performing how I would expect.
I will try this on my e 150. i have no brake pressure, After 3 to 4 fast Pumps i have for a Short time brake pressure when the Motor is of
@@flxrix6913 You mean actual hydraulic braking pressure? The pedal does not stay firm and sinks to the floor with the engine off? If that is happening you probably have a leak in your braking system somewhere and air has gotten into the line. You'll need to find and address your leak before worrying about the brake booster.
Treat your needle nose pliers with WD40.
@@harryholiday5356 I hit them with some Kroil in a later video and it loosened up... for now.