How I Built Wifi Controlled LED Wall Lamps
Vložit
- čas přidán 5. 09. 2024
- These simple LED wall lamps were a fun project to add some unique lighting to my new room! Each lamp takes only a few hours to make and they’re so cheap (about $20) that I’m going to be making more to fill my room. They look so clean and the reflection of the LEDs on the ceiling gives it an extra pop I haven’t seen from other DIY lamp designs.
These Lamps are powered using WLED which has so many amazing features. It has an app I can use on my iPhone to change colors, animations, brightness, speed, and many other settings. I can save my favorites as presets, sync my lamps together, and even set up sound reactive animations (Google LEDFX).
If you like what you see let me know in the comments below, I read all of them and reply to most! Also please leave a like and consider subscribing. I’m new to CZcams and I want to see this channel grow. If you’re reading this then you’re at least a little more interested than the average viewer so I appreciate you!
If you want to recreate this project there are full written instructions on my instructables page. Don’t forget to vote at the bottom!
www.instructab...
Like this project and want to see more? Hop over to my website chrisparker.tech
The other links you’ll need:
Dr. Zzz's Video: • Beginner's Guide to Ch...
WLED: github.com/Air...
ESPHomeFlasher: github.com/esp...
Supplies used in this video:
Use the affiliate links to support my channel
Wemos D1 Mini - amzn.to/2B28bsd
WS2812b LED Strip - amzn.to/36VAJOS
Acrylic - amzn.to/2Z1yOW3
DC Jack - amzn.to/3enOVno
5V 2A DC Power Supply - amzn.to/2YspiMP
(Use a bigger supply for more dense LED Strips) Min Amps = # LEDs * 0.5
Miter Saw - amzn.to/37TtKY1
Finish Sander - amzn.to/2BwiRPF
Dremel - amzn.to/2VdnLrN
Wood Glue - amzn.to/3hS4BBr
Epoxy - amzn.to/3dwq3bH
Clamps - amzn.to/3es808b
Soldering Iron - amzn.to/2NsUyoR
Solder - amzn.to/2sqpBul
Wire - amzn.to/2FS5Sa0
Wire stripper - amzn.to/35NtfvW
Hot Glue Gun - amzn.to/3864pcc
Hot Glue - amzn.to/3acrVWX
Has this project inspired you to make your own? Leave a comment and let me know! I read all of them and reply to most.
Also I'd love it if y'all would vote for my instructable! Here's the link:
www.instructables.com/id/Easy-Sleek-and-Modern-LED-Lamps/
İ really like your projects this are what I'm looking for 😂😂my roomm, I'm gonna test maybe in my channel 👍🏻🐌🐌🐌🐌
@@MelikeBalpnar Thanks for trying it out. I look forward to seeing your take on it!
Mom! Quick! I'm on TV :)
I recently started doing DIY for making LED panels and came across your channel -- I have to say, sanding the acrylic is such an amazing idea - thank you! I will be trying this out and I subbed to your channel.
Thanks for the sub! Good luck with your projects
Just letting you know I found you via random suggestion of the LED video wall on my home page. Cool videos and ideas. I'd say this one could use some polish (or a collab with a woodworking channel could be neat), but the idea is solid.
You're the best, Chris. Love your content!
Sick video and that breathing rainbow looks awesome.
Glad you enjoyed!
@@Tech-Random I have posted a few videos about arduino powered RGB lighting so I can certainly appreciate the hard work you put into these projects. Subbed instantly.
Thanks! I watched your rgb shades video. Pretty cool idea!
Super awesome project as always, Chris!! Can't wait to see even more vids!
Thanks for the support
You could probably easily integrate a self built Fibonacci Clock with these lamps. Very cool project!
Great idea. Might look into that for a future update
I want one😍😍😍 Always killing it Chris! Love your videos :)
You're the best!
Absolutely outstanding! Good show!
Thanks!
Not sure how you don't have way more subs. Your DIYs are awesome. Deff subbed.
Thanks for the support! More are joining each day and I’m starting to get sponsored so I can make better content. I’m excited to see this channel grow!
Thanks for the video, found this from instructables. Only thing I would recommend is for video content like this, a little more in depth on the controls for the colors, wiring, sound reactive part and such in the video would be great.
Thanks, I’ll add more instructions in my next one!
New sub, not from Instructables but from HackaDay. Looks like you are trying hard to make that dorm room different. I look forward to more videos Chris.
Thanks for the sub! I’ll show off my new room in my video this weekend ;-)
Just here to comment before this channel really blows up
Thanks for the support! I can dream haha
I'll support this! :D
very good videos, keep it up, greetings from Argentina
It seems very cool, Yes I´m going to try to do it and in some days I hope to tell you how it was....And by the way, very a good job. Thanks
Good luck! Hope it turns out good
great project, though while watching i saw several ways in which it could be done a bit different to make things a bit stronger and a bit less light bleedover.
They could definitely be a bit stronger. I imagine they wouldn’t hold up if they fell of the wall but they’ve done pretty well so far. I hope you try and make your own design, it’s a fun project!
Hey, cool video! BTW, what's that animating-pixel-thing reflecting in the smart mirror?
Check out the first video on my channel. I made a wall with clickable light up tiles!
DONT STOP DOING THAT
Came back here just to like the videos.
Means a lot! Thanks for the support
There's a WLED fork that include sound reactive functionality "atuline
WLED"
I’ve seen it and I’ve used it since I made this video!
theres a PR to add this to the main code, hopefully in 11
What is the tubing that you used around the wires? And what grit of did you use when sanding the acrylic?
The wires are just held together with masking tape haha. I laid down a long strip of tape and stuck the wires down and wrapped around it. I have no idea what sand paper grit I used, honestly I just used the finest grit I already had. Hope that helps!
I love your DIYS! Do you have 2 power supply for the two lamps?
Yep. Each lamp has its own 5v 2a supply
I am your 300th subscriber
Woohoo! Thanks for the support!
What was the intro song you used? Nice final product too, you deserve more subs
I just get my songs from the CZcams audio library so I have no clue what the name of that one is. I'm going to start adding a list of songs to my descriptions though since a few people have asked.
Great video, as always. I feel that I stumbled upon you from Thingiverse.
QQ: What did you end up replacing the strips with after not liking the single LEDs being visible. I may have missed your fix when watching; guilty multitasker.
I haven’t actually fixed it yet. What you see in all the shots is still a 30 led per meter strip. When it’s placed above eye level it looks way better!
do you need a bigger power supply is we go with the 300 leds
Yes the supply I used can’t power very many LEDs. You’ll want a 5V supply but to get the amperage you should use this equation: minimum Amps = #Leds * 0.05
@@Tech-Random Your description says LEDs * 0.5 .... that would be a lot of Amps!
Yes. Yes it is
Hi, Do you do smart bulb review? How can I contact you about business inquiry?
You can email me at chparkertech@gmail.com
Hi
Also, for your power supplies, check out Andreas video on re-purposing old server power supplies that can be had for the cheap: czcams.com/video/0IX3euYOb5E/video.html
Great idea, I’ve been wanting to upgrade the supply for my LED wall so I’ll look into this solution
😭 can I just buy it from you
I’m working on setting up a project I can sell. These lamps are super easy though. If you get the parts I’m sure you’d be surprised how fast you get it working
@@Tech-Random 𝓣𝓱𝓪𝓷𝓴 𝔂𝓸𝓾
Hi Chris, do you have a business inquire business?
Yes you can contact me at chparkertech(at)gmail.com
Give me your email. I have lamps to review for you.