Thanks for another great video. I am now waiting in suspense for your next video. I suggest you add a brief introduction to the start of the video that helps a first time viewer get up to speed. It is like an elevator pitch that includes a summary of what has happened before assuming we have not watched any previous videos.
Thank you. Sometimes you wind up with egg on your face. The last two have been good. Amen. Thank you for watching and commenting. You keep the channel going. By the way viewers in the United States outnumber Nigerians 5 to 1. Let us fix that.
Hello ，Sir , i am very happy you like deye hybrid inverter , because i work in deye for solar inverter , now we are looking for good partner , if you have idea , pls contact my email: Wangam@deye.com.cn
Greetings Dr Solar. I’m looking forward to you showing the Deye 5Kva with Pylontech as Grid-tied, reason being that I’m trying to figure out if I need a CT Clamp to make sure the anti-islanding is working even though “zero export” is set.
We have the CT clamp on every installation. And they recommend that we install them. We are not grid tied per say, but the inverter has the ability to sell back to the grid. Use the CT clamp and you are good.
Again great video, the battery and operation efficiency is very nice, the fan noise is a problem. What is the max amp per MPPT. Hopefully a split phase version will be available. Did you try the wifi connection with the phone app.
Hello Marco. There is a split phase version. Each MPPT can do about 67 amps. 3250 watts each. Yes I did the Wi-Fi connection with the phone app and my laptop. The phone app is more reliable but is still one way. I can monitor but I can't change parameters. Thank you for watching and commenting
Wonderful video as usual Dr Solar. It's nice to know that you are having a net positive view of the inverter. Is the fan loud enough to be a factor in considering where to locate the inverter in the house?
The Victron and Schneider inverters were just as loud and louder when the battery is being charged. I had become so accustomed to the silence from the LuxPower. I would not install it in the living room or bedroom. The inverter is IP65 and can be installed outdoors. So your options are plenty
Hi Doc, interesting review. Noise is a common problem for end-users and as you've mentioned Victron units are also loud. The GoodWe ES is nice and quiet (fanless design) once getting used to it using this or a Victron can be a problem. Whether using Victron, GoodWe or Deye, all seem to be good in their own respect. I have a couple of questions: 1. What is the app called to access the monitoring? (is the web site different to the app?) 2. Does the inverter when purchasing it come with an energy meter or a CT? (I know you're off-grid so maybe not relevant) 3. The fan you say comes on when the unit is working (be it charging of batteries, or measured temp > x, load > y etc) - So isn't on 24/7? Regards
Hey Chris thank you for watching. The GoodWe and LuxPower are fanless. I miss that feature. 1. Solarman. Solarman the website pro.solarman.cn 2. Yes and we have it connected 3. The fan comes on, as a function of temperature of the components. It measures AC and DC parts of the circuitry and comes on when certain temperature thresholds are met. 51C and 47 C
Enrique recommended the Noctua fans. I will look them up. Thanks for your suggestion. I will do a video once I do the upgrade. It is very quiet at the moment. Thank for watching
Get the specs from the cooling fan, buy a new higher quality one and then crimp in the new wires. Don’t solder it because vibration will cause solder to fail. Splice the fan in similar to how care stereos are crimped together.
Hello ，Sir , i am very happy you like deye hybrid inverter , because i work in deye for solar inverter , now we are looking for good partner , if you have idea , pls contact my email: Wangam@deye.com.cn
Nice update and commentary. Apart from noise, it looks like a good investment. How much will this cost and what power demand will this setup be able to manage?
MF Jones it is a very good investment. Can't remember the last time I was this impressed by a Chinese inverter. They have done their research and I am liking it very much
Hi Dr. Solar, greetings from Zimbabwe again. I’m loving your channel and move from the expensive former supplier. I’m wanting to get your comparative opinion on Dye vs LuxPower on Pylontech batteries. I too would appreciate to have: • less components • less noise • more flexible user interface • support (installation, backup & sales) - these products are unknown in our part of the world…any ideas & advice would be most appreciated. I had a 24v 3Kva system on AGM batteries which has reached EOL on AGM with 12 x 250Watt panels. I’m researching & wanting to go the lithium LifePO4 route using Pylontech battery & scaling to 5Kva. Sadly it seems I may have to change my wiring. Minus the PV it seems like it’s putting a whole new system which is frustrating and costly. What would you propose?
@Moffat Hello from Lagos Nigeria. 21 years ago we had a lady from Zimbabwe watch our son. She was an incredible woman and she showed how warm and friendly people from Zim are. I have no experience with the Pylontech. The folks at Dyness left Pylontech to start their company. Pylontech is a know brand and it works with Deye and LuxPower. The LuxPower inverter has the better app but the interface on the inverter is horrible. It requires that you use the app or the web to configure it. It does not have a fan so that is a big plus when it comes to noise. It is limited to 3600 watts when it is battery only. The AC charger is limited to 60 amps. The Deye has a fan so that is the only negative. Can output the full 5 kw. Much better and intuitive screen interface. 120 amp AC charger. They both have dual MPPT and monitoring. You don't need to change your AC or PV wiring. All you need to do is increase your string voltage and change the breakers or fuse between the PV and inverter. They both can go up to 500V DC. So your panels can be connected 12 in series. Deye is sold as SunSynk in SA. So you can find it there.
AWPS Renewable Energy, LTD thanks for the prompt response. I suspect at the rate I’m going, I’ll end up being an installer as well because multiple installers have a habit of being fear mongers in order to milk clients of their money or push them to a specific brand of products, where only they benefit 😡
@@tirivaenim sad but true. Even if you don't install it is helpful to know what you are getting. Learn as much from videos like mine and then try an actual small system yourself. Goodluck in your quest
Hi again. Have you connected a wind turbine to a deye inverter? And if you did would you mind sharing on where you connected it to? If not do you perhaps know the setup? I was wandering if one could connect it to one of the mppt's or should you use a separate charge controller, but if you use a separate charge controller how would one the manage the incoming volts when the batteries are full?
Hello Johann. I hope all is well with you. No I have not done a wind turbine with it. From my rudimentary understanding. It goes into the MPPT and then you go into the advanced function setting for wind turbines. You will still need a wind turbine controller between the inverter and your turbine.
I have a 3Kw 24v inverter and system, financially I’m unable to upgrade to 5Kw 48v all at once. I’m thinking of getting the 5Kw Sunsynk, upgrade my wiring upgrade my dc breaker but still run my current battery bank of 100ah x 6 AGM batteries. Can I change my: • charge voltage on the inverter, since my consumption won’t go up • is this safe on my batteries?
Hello Dan. Happy new year. Thank you for watching and commenting. The inverter will not be shipped to the US. They have an agreement with someone that forbids that. The battery you can buy directly from Dyness and they will deliver to you.
Hi. Love your videos. I have a 8kW Deye inverter but it keeps beeping on F20 Fault (DC overcurrent) when I turn the solar on. I have 15 X 450W Panels installed. Please could you assist in telling me how can I resolve this? Is there a setting I need to select on the inverter to fix this problem? Thank you in advance.
7:50 From your experience, say I have 5kw Inverter A (GOOD), 5k Inverter B (average inverter). Can Inverter A, produce more energy using the same panels as Inverter B? even if they're both the same size? I just got Deye & I feel like it's somehow producing more than my previous cheaper Growatt if that makes sense. (Same solar Panels)
The Deye is also transformerless. The low frequency inverters give up a lot of ground to the HF units in efficiency. Even Victron has climbed on the HF bandwagon
The problem with transformers less inverters is that they are very susceptible to lightning strikes on the grid. When there is a transformer those high in rush voltages and spikes are significantly dampened by the transformer protecting the electronics. But the d e y e inverters have built in lightning surgery aresters that help mitigate the damage from lightning strikes thereby offering the protection that a transformer would give but less the weight and cost.
@drsolar good day sir, why all dis new generations inverters all in one have issues on one another, for me I still prefer my Morningstar TriStar mppt 60A or 600V charger controller, dis is my 14™ good years of using it without eaney problems working with headsink know fan no eaney issues dere still the best up to dated, I'm still weating for dere inverters.
Hello. Have you been able to use BMS communication between Weco and Deye? I would prefer that rather than using the Deye with the voltage measure system. Thank you!
Thank you for watching and commenting. Yes you have to crimp the cable the communication cable to have the set of pins that work with both. Email me and I will send you the info. Please don't forget to subscribe and share
Good day, to be able for the deye to read the battery bms, select on the deye battery page, "lithium" and on next page set protocol 00 and use the can port on the deye inverter to can port on battery.
hello.. i have a problem with deye 5k hybrid.. my psy and some chargers are buzzing(making a noise not all people can here.. but i do) is there a solution so i can prevent the noise?
Deye has an internal and external fan. That could be what is transferring to the other devices if they are on the same board or wall. Electronic noise? I have no answers.
So for a DIY lifep04 battery with BMS but unable to communicate with the Deye inverter, will the Deye be able to measure the current charge and discharge to give a better accurate battery SOC similar to the BMS SOC? Can you confirm? Thanks a lot.
Thank you for watching and commenting. For your custom battery, you will have to use lead acid settings and voltage instead of percentage. The inverter tries to learn over time and comes close. But it won't match the battery BMS for accuracy. Please subscribe and share. Stay safe and healthy
Good day, to be able for the deye to read the battery bms, select on the deye "lithium" and on next page set protocol 00 and use the can port on the deye inverter to can port on battery.
@@drsolar Hello again. When you say DEYE will learn over time, do you know how DEYE learns to get an approximate SOC? Is it the typical SOC to battery voltage for lead acid? Unfotunately, Lifepo4 has a flat voltage to SOC (from 10% to 90%) and it will not be possible to tell the SOC percentage at a voltage level.
Hello Dr. Solar, may I ask what your connection there is it line to neutral? The reason Im asking is that in my region they are selling the EU version which matches line to neutral connection.. However, where I live our outlets are line to line. Since the available units are EU versions therefore it will not work in the area where I live? Thanks
Good day from Lagos. Which country are you in? The EU version has 3 wires L N E. What do you have where you are? I did not quite get what you meant by line to line? Do you meet each side can be the live? No matter how you flip the plug?
@@nestyplus in the Philippines you run US 110V. Ask them to sell you a US version. As long as you are not buying it for US in the USA or US territories they will sell it to you
You are absolutely correct when the two (inverter and battery) operate in a closed loop. The two manufacturers have exchanged protocols and they have programmed that into the respective devices. For anything else you have to adjust the settings yourself. Weco has not approved the inverter and vice versa. So it uses the profile that you set.
@@eumellopez661 good morning. I am 100% off the grid. No grid no generator. I am not able to test the feature. Thank you for watching and commenting and I will calm down and make more videos.
Hi, are you still running off of this inverter and if so how has it been doing since you commissioned it? I have now been on it for the past 6 weeks totally off grid and I myself have not encountered any problems with it. Running very well and takes the load good. I have 12 X 480w panels and 3 X 4.8kw lifepo4 lithium batteries.
@@drsolar have you connected a generator to the inverter for backup. Today we had real bad weather so did not get full charge, I connected a gen 7.5kw to the inverter on the inverter input but when running the generator the lights in my house flickers but the volts is staying constant and the frequency is also constant. Any suggestions?
@@johannwentzel1125 we have connected it to generators for our customers and it did not work with gasoline generators. I suggest you adjust the frequency and voltage range and see if it helps.
Hi, I have the 5kw model with a 5 kW battery. It is working fine with little noise. I had it for 6 weeks without a battery. The battery was installed a week ago. Though, I have a problem that baffles me. My electricity board app tells me I consume between 5-6 kWh a day. Yet my battery never goes below 80% overnight. The consumption profile follows the pattern of our use of solar panels and battery but not as high. When I check the inverter panel, for example when I use the electric kettle, it shows that our consumption is covered fully by either the solar panel in the daytime or the battery at night. Has anyone any idea what's the cause of this?
Congrats on your new acquisition. We don't have the ability to sell back so we have not experience. Confirm your time of use settings. See if that helps
Thank you for watching and commenting. I have had 0 problems with the inverter. No maintenance so far. I will look at fan service and update in an upcoming video
Thank you for watching and commenting. I have not done a Deye inverter in a while. I will guess the Sg05 is newer than the Sg03. There might be some changes to the devices. Just guessing
Another great video. I am thinking about getting a Deye inverter. Do you still feel they are very good. What is the best value for money inverter today, in your opinion?
Please reply as quick as possible, Sir Hi there Sir, the 100% same of deye inverters are available in Pakistan but they have changed the logo and name, Nitrox 5G 5KW .... otherwise it's all the same to same... but I didn't use yet, I'm planning to buy soon and use, I hope this would be the best investment. Sir, can we put all the load on it for a few hours?
@@drsolar for example, this is a 5kw inverter right, So if we put all the load on it I mean all the 5kw on it, so is that will still run for few hours. All I mean is can we run water heaters and room heaters for few hours. Water heater is 2000W and room heater is also 2000W. I hope you got my mean!
Hi Dr Solar. Is the Deye able to switch the generator off again and return to inversion when it recognizes the batteries are charged? Also can it choose between switching on generator or the grid to manage loads and charge the batteries. Would I need to only have either the grid or a generator and not both as how would it differentiate the two?
Thank you for watching and commenting. The system will look for the grid first. If you have checked the generator charge and are using the dry contact it will start and stop the generator based on parameters you set. Sadly it won't switch to the grid if the grid comes.
@@drsolar Thank you for the reply understood. Another question. Does the Deye and Sunsynk program in exactly the same way as I know it’s the same company but is the menu profile and set ups identical?
@@drsolar OK. Thank you for your reply and expert knowledge. So that begs the question. Which of the two of those brands in a 8kw and parallel configuration would you choose. I hope to have 2 x8kw for myself and 3 in parallel for 3 upper floor apartments pray God to supply me with the health and wealth to build the whole building in Jamaica.
@@drsolarI want to buy two 10kw and parallel them with my techfine inverter. My only concern is knowing if they are durable, please let me know how they are holding up over the years
Good day boss....I actually wNt to upgrade to lithium batteries nd hybrid inverter like this one... ease I need to possibly come to your office for good understanding on how it works....can you share your contact with me...am also in lagos
Hi from the USA I like watching your progress and the in-depth reviews are great 😎😎😎😎
Hello from Lagos Burton. I appreciate your comments. I hope you are staying safe.
Thanks for another great video. I am now waiting in suspense for your next video.
I suggest you add a brief introduction to the start of the video that helps a first time viewer get up to speed. It is like an elevator pitch that includes a summary of what has happened before assuming we have not watched any previous videos.
Hello Tony I was too excited. I will do that next time. Thank you for the suggestion.
Always willing to learn new technologies and believe me I appreciate your passion to teach others.God bless you.
Thank you. Sometimes you wind up with egg on your face. The last two have been good. Amen. Thank you for watching and commenting. You keep the channel going. By the way viewers in the United States outnumber Nigerians 5 to 1. Let us fix that.
Hello ，Sir , i am very happy you like deye hybrid inverter , because i work in deye for solar inverter , now we are looking for good partner , if you have idea , pls contact my email: Wangam@deye.com.cn
Greetings Dr Solar. I’m looking forward to you showing the Deye 5Kva with Pylontech as Grid-tied, reason being that I’m trying to figure out if I need a CT Clamp to make sure the anti-islanding is working even though “zero export” is set.
We have the CT clamp on every installation. And they recommend that we install them. We are not grid tied per say, but the inverter has the ability to sell back to the grid. Use the CT clamp and you are good.
@@drsolar Sadly my connection into the house is through the wall and connects behind the DB. How do I connect the CT clamp.
Again great video, the battery and operation efficiency is very nice, the fan noise is a problem. What is the max amp per MPPT. Hopefully a split phase version will be available. Did you try the wifi connection with the phone app.
Hello Marco. There is a split phase version. Each MPPT can do about 67 amps. 3250 watts each. Yes I did the Wi-Fi connection with the phone app and my laptop. The phone app is more reliable but is still one way. I can monitor but I can't change parameters. Thank you for watching and commenting
Wonderful video as usual Dr Solar. It's nice to know that you are having a net positive view of the inverter. Is the fan loud enough to be a factor in considering where to locate the inverter in the house?
The Victron and Schneider inverters were just as loud and louder when the battery is being charged. I had become so accustomed to the silence from the LuxPower. I would not install it in the living room or bedroom. The inverter is IP65 and can be installed outdoors. So your options are plenty
You have installed it inside, but it performs better outside or in places where it could have access to open air.
Thanks for the suggestion. We have one installed outside and we don't see much difference.
Hi Doc, interesting review. Noise is a common problem for end-users and as you've mentioned Victron units are also loud. The GoodWe ES is nice and quiet (fanless design) once getting used to it using this or a Victron can be a problem. Whether using Victron, GoodWe or Deye, all seem to be good in their own respect. I have a couple of questions:
1. What is the app called to access the monitoring? (is the web site different to the app?)
2. Does the inverter when purchasing it come with an energy meter or a CT? (I know you're off-grid so maybe not relevant)
3. The fan you say comes on when the unit is working (be it charging of batteries, or measured temp > x, load > y etc) - So isn't on 24/7?
Regards
Hey Chris thank you for watching. The GoodWe and LuxPower are fanless. I miss that feature.
1. Solarman. Solarman the website pro.solarman.cn
2. Yes and we have it connected
3. The fan comes on, as a function of temperature of the components. It measures AC and DC parts of the circuitry and comes on when certain temperature thresholds are met. 51C and 47 C
You need a quick connect panel so you don't have to drill more holes. The fan would have to go.
OGW I was thinking about that today. It might be my next iteration. How are you doing? Hopefully you are getting some sun
there are quiet cpu fans you can buy , serated style blades noise cancelling technology.
Enrique recommended the Noctua fans. I will look them up. Thanks for your suggestion. I will do a video once I do the upgrade. It is very quiet at the moment. Thank for watching
Get the specs from the cooling fan, buy a new higher quality one and then crimp in the new wires. Don’t solder it because vibration will cause solder to fail. Splice the fan in similar to how care stereos are crimped together.
Thanks for the tip. We will consider it for the next customer that has issues with the noise
Nice one hope the battery work very well and let see how long I will last maybe I will upgrade mine
Hello Jonah thank you. I am loving the battery. It is now an after thought
Hello ，Sir , i am very happy you like deye hybrid inverter , because i work in deye for solar inverter , now we are looking for good partner , if you have idea , pls contact my email: Wangam@deye.com.cn
Nice update and commentary.
Apart from noise, it looks like a good investment. How much will this cost and what power demand will this setup be able to manage?
MF Jones it is a very good investment. Can't remember the last time I was this impressed by a Chinese inverter. They have done their research and I am liking it very much
Hi Dr. Solar, greetings from Zimbabwe again. I’m loving your channel and move from the expensive former supplier. I’m wanting to get your comparative opinion on Dye vs LuxPower on Pylontech batteries. I too would appreciate to have:
• less components
• less noise
• more flexible user interface
• support (installation, backup & sales) - these products are unknown in our part of the world…any ideas & advice would be most appreciated.
I had a 24v 3Kva system on AGM batteries which has reached EOL on AGM with 12 x 250Watt panels. I’m researching & wanting to go the lithium LifePO4 route using Pylontech battery & scaling to 5Kva. Sadly it seems I may have to change my wiring. Minus the PV it seems like it’s putting a whole new system which is frustrating and costly. What would you propose?
@Moffat Hello from Lagos Nigeria. 21 years ago we had a lady from Zimbabwe watch our son. She was an incredible woman and she showed how warm and friendly people from Zim are. I have no experience with the Pylontech. The folks at Dyness left Pylontech to start their company. Pylontech is a know brand and it works with Deye and LuxPower. The LuxPower inverter has the better app but the interface on the inverter is horrible. It requires that you use the app or the web to configure it. It does not have a fan so that is a big plus when it comes to noise. It is limited to 3600 watts when it is battery only. The AC charger is limited to 60 amps. The Deye has a fan so that is the only negative. Can output the full 5 kw. Much better and intuitive screen interface. 120 amp AC charger. They both have dual MPPT and monitoring. You don't need to change your AC or PV wiring. All you need to do is increase your string voltage and change the breakers or fuse between the PV and inverter. They both can go up to 500V DC. So your panels can be connected 12 in series. Deye is sold as SunSynk in SA. So you can find it there.
AWPS Renewable Energy, LTD thanks for the prompt response. I suspect at the rate I’m going, I’ll end up being an installer as well because multiple installers have a habit of being fear mongers in order to milk clients of their money or push them to a specific brand of products, where only they benefit 😡
@@tirivaenim sad but true. Even if you don't install it is helpful to know what you are getting. Learn as much from videos like mine and then try an actual small system yourself. Goodluck in your quest
Hi again. Have you connected a wind turbine to a deye inverter? And if you did would you mind sharing on where you connected it to? If not do you perhaps know the setup? I was wandering if one could connect it to one of the mppt's or should you use a separate charge controller, but if you use a separate charge controller how would one the manage the incoming volts when the batteries are full?
Hello Johann. I hope all is well with you. No I have not done a wind turbine with it. From my rudimentary understanding. It goes into the MPPT and then you go into the advanced function setting for wind turbines. You will still need a wind turbine controller between the inverter and your turbine.
I have a 3Kw 24v inverter and system, financially I’m unable to upgrade to 5Kw 48v all at once. I’m thinking of getting the 5Kw Sunsynk, upgrade my wiring upgrade my dc breaker but still run my current battery bank of 100ah x 6 AGM batteries. Can I change my:
• charge voltage on the inverter, since my consumption won’t go up
• is this safe on my batteries?
They would on work as 48V. The battery range is pretty wide, You will ether use 4 of your batteries if they are 12V or buy new batteries.
Very nice. Thanks for sharing.
Thank you for watching and commenting. Please don't forget to subscribe
I does seem a little loud. Looks like it works well though
Hey Frank. I am liking it. I hope all is well with you.
@@drsolar ya not too bad here. You good?
@@frankz1125 I am wonderful. Thanks for asking
Where are these available in the United States? Thank you for your informative video's Doc
Hello Dan. Happy new year. Thank you for watching and commenting. The inverter will not be shipped to the US. They have an agreement with someone that forbids that. The battery you can buy directly from Dyness and they will deliver to you.
Hi. Love your videos. I have a 8kW Deye inverter but it keeps beeping on F20 Fault (DC overcurrent) when I turn the solar on. I have 15 X 450W Panels installed. Please could you assist in telling me how can I resolve this? Is there a setting I need to select on the inverter to fix this problem? Thank you in advance.
I responded to this already. I hope that you have resolved it.
@@drsolar Thank you I have replied with the information you need. Much appreciated. I await your feedback. Regards
7:50 From your experience, say I have 5kw Inverter A (GOOD), 5k Inverter B (average inverter).
Can Inverter A, produce more energy using the same panels as Inverter B? even if they're both the same size?
I just got Deye & I feel like it's somehow producing more than my previous cheaper Growatt if that makes sense. (Same solar Panels)
The algorithm that they use of the mppt has an effect on how well it produces.
nice luxpower is silent because is transformless.. transformless is easy to break and hard to fix.. so i prefer to go with a transformer inverter
The Deye is also transformerless. The low frequency inverters give up a lot of ground to the HF units in efficiency. Even Victron has climbed on the HF bandwagon
The problem with transformers less inverters is that they are very susceptible to lightning strikes on the grid. When there is a transformer those high in rush voltages and spikes are significantly dampened by the transformer protecting the electronics. But the d e y e inverters have built in lightning surgery aresters that help mitigate the damage from lightning strikes thereby offering the protection that a transformer would give but less the weight and cost.
Good day sir, i want to ask if we need to check or activate the Activate Battery setting in Battery Mode. Thank again
Thank you for watching and commenting. Yes you do. I have aways checked the box
Let me know how you make out.
@drsolar good day sir, why all dis new generations inverters all in one have issues on one another, for me I still prefer my Morningstar TriStar mppt 60A or 600V charger controller, dis is my 14™ good years of using it without eaney problems working with headsink know fan no eaney issues dere still the best up to dated, I'm still weating for dere inverters.
Thank you for watching and commenting. There are people your set up work for. And if it works for you please use it.
Hi
I need to install this deye 5kw
Without a battery
Other than putting in battery setting no battery, is there anything elese i have to setup?
Thanks for watching and commenting. I suggest that you reach out to your retailer.
Hi were u able to correct the noise/buzzing problem?
I got used to it. It is the cooling fan. Thank you for watching and commenting
Hello. Have you been able to use BMS communication between Weco and Deye? I would prefer that rather than using the Deye with the voltage measure system. Thank you!
Thank you for watching and commenting. Yes you have to crimp the cable the communication cable to have the set of pins that work with both. Email me and I will send you the info. Please don't forget to subscribe and share
Good day, to be able for the deye to read the battery bms, select on the deye battery page, "lithium" and on next page set protocol 00 and use the can port on the deye inverter to can port on battery.
@@johannwentzel1125 thank you for the tip
@@drsolar can we use jkbms with deye inverter?
@@netrocker9990 I honestly don't know if you can or can't. Thank you for watching and commenting.
hello.. i have a problem with deye 5k hybrid.. my psy and some chargers are buzzing(making a noise not all people can here.. but i do) is there a solution so i can prevent the noise?
Deye has an internal and external fan. That could be what is transferring to the other devices if they are on the same board or wall. Electronic noise? I have no answers.
Check the frequency settings
Please between DEYE 5KW 48V and GLOWATT 5KW 48V which one is the best?
I don't have experiences with the new Growatt inverters so I can't advise you. The Deye is a good inverter and I install it for my clients.
So for a DIY lifep04 battery with BMS but unable to communicate with the Deye inverter, will the Deye be able to measure the current charge and discharge to give a better accurate battery SOC similar to the BMS SOC? Can you confirm? Thanks a lot.
Thank you for watching and commenting. For your custom battery, you will have to use lead acid settings and voltage instead of percentage. The inverter tries to learn over time and comes close. But it won't match the battery BMS for accuracy. Please subscribe and share. Stay safe and healthy
Thank you.
Good day, to be able for the deye to read the battery bms, select on the deye "lithium" and on next page set protocol 00 and use the can port on the deye inverter to can port on battery.
@@johannwentzel1125 Some have BMS like "DALY BMS" but no CAN port. So no other option but use DEYE lead acid setting.
@@drsolar Hello again. When you say DEYE will learn over time, do you know how DEYE learns to get an approximate SOC? Is it the typical SOC to battery voltage for lead acid? Unfotunately, Lifepo4 has a flat voltage to SOC (from 10% to 90%) and it will not be possible to tell the SOC percentage at a voltage level.
Does the Deye hybrid inverter work well? Does it give a lot of trouble and is it worth the money?
Minimal problems. Worth the money. Thank you for watching and commenting
Hello Dr. Solar, may I ask what your connection there is it line to neutral? The reason Im asking is that in my region they are selling the EU version which matches line to neutral connection.. However, where I live our outlets are line to line. Since the available units are EU versions therefore it will not work in the area where I live? Thanks
Good day from Lagos. Which country are you in? The EU version has 3 wires L N E. What do you have where you are? I did not quite get what you meant by line to line? Do you meet each side can be the live? No matter how you flip the plug?
@@drsolar , Hi Dr Solar, from Philippines.. L1 L2 wires does not match L N of EU version
@@nestyplus in the Philippines you run US 110V. Ask them to sell you a US version. As long as you are not buying it for US in the USA or US territories they will sell it to you
Where can i find this in EU?
You probably meant neutral wire is grounded? If this is mono phase connections.
Doc ,about the charging,, i thought the inverter will configure parameters for charging, thru bms communication?
You are absolutely correct when the two (inverter and battery) operate in a closed loop. The two manufacturers have exchanged protocols and they have programmed that into the respective devices. For anything else you have to adjust the settings yourself. Weco has not approved the inverter and vice versa. So it uses the profile that you set.
Thank you doc,, more vids please,, have u tried the power shaving mode?
@@eumellopez661 good morning. I am 100% off the grid. No grid no generator. I am not able to test the feature. Thank you for watching and commenting and I will calm down and make more videos.
Where can I purchase this invertor in the US or the Caribbean?
Hello Brittney, Sol-Ark is the only one that can sell this to you in the US. Where in the Caribbean are you? Thank you for watching and commenting
Hi, are you still running off of this inverter and if so how has it been doing since you commissioned it? I have now been on it for the past 6 weeks totally off grid and I myself have not encountered any problems with it. Running very well and takes the load good. I have 12 X 480w panels and 3 X 4.8kw lifepo4 lithium batteries.
Congrats on getting one. They run problem free most of the time. Mine is running at an AirBnB and it is doing fine.
@@drsolar have you connected a generator to the inverter for backup. Today we had real bad weather so did not get full charge, I connected a gen 7.5kw to the inverter on the inverter input but when running the generator the lights in my house flickers but the volts is staying constant and the frequency is also constant. Any suggestions?
@@johannwentzel1125 we have connected it to generators for our customers and it did not work with gasoline generators. I suggest you adjust the frequency and voltage range and see if it helps.
@@drsolar thanks for the reply. What generators did you use, diesel generators?
@@johannwentzel1125 any diesel generator 20 kva and up worked fine without a problem.
Hi, I have the 5kw model with a 5 kW battery. It is working fine with little noise. I had it for 6 weeks without a battery. The battery was installed a week ago. Though, I have a problem that baffles me. My electricity board app tells me I consume between 5-6 kWh a day. Yet my battery never goes below 80% overnight. The consumption profile follows the pattern of our use of solar panels and battery but not as high. When I check the inverter panel, for example when I use the electric kettle, it shows that our consumption is covered fully by either the solar panel in the daytime or the battery at night. Has anyone any idea what's the cause of this?
Congrats on your new acquisition. We don't have the ability to sell back so we have not experience. Confirm your time of use settings. See if that helps
I was told the luxp 5 kwh hybrid can only output 3.6 kwh and the deye can output actual 5 kwh. Is this true???
On battery power that is correct. If you have pv or the grid then the full 5 kw
@@drsolar Is that typical for inverters to not be able to use their full capacity for batteries or is that just a luxp design weakness?
@@myparadiseonbantayanisland9030 some manufacturers do that. Goodwe used to be like that with earlier generations of inverters.
Hello. How has your 1 year experience with this been?
Has this caused any problems in 1 year? Any maintenance costs?
Thank you for watching and commenting. I have had 0 problems with the inverter. No maintenance so far. I will look at fan service and update in an upcoming video
@@drsolar Update on the 2 year experience? xD
@@Joe-jc5ol still good. No complains.Thanks for coming back and following up
Sir, is it ok to switch Off 1 string of pv panel in deye inverter, let say battery was fully charged and only minimal house load. Thanks
Yes it is ok but not necessary. The system will only take what it needs. You can have 6 kw in PV but it will use 500 w if that is all you need.
what is different between sg05 and sg03 or sg04?
Thank you for watching and commenting. I have not done a Deye inverter in a while. I will guess the Sg05 is newer than the Sg03. There might be some changes to the devices. Just guessing
Another great video. I am thinking about getting a Deye inverter. Do you still feel they are very good. What is the best value for money inverter today, in your opinion?
Thank you for watching and commenting. Deye does a good job. If you are replacing your entire system SolaX is perfect.
Never heard of it, I will look it up. I am just changing my inverter for now but my brother is looking for a new system@@drsolar
Hi Dr. you have a new subscriber, tell me more about Solax. Please keep in mind in my country we use 110/220V 50Hz power.@@drsolar
@@Floyd112007 thank you and welcome to the channel. SolaX has a product for the US that meets your needs.
How does one get this solaX please
Please reply as quick as possible, Sir
Hi there Sir, the 100% same of deye inverters are available in Pakistan but they have changed the logo and name,
Nitrox 5G 5KW .... otherwise it's all the same to same... but I didn't use yet,
I'm planning to buy soon and use, I hope this would be the best investment.
Sir, can we put all the load on it for a few hours?
How many watts in load?. I run mine 24 hours a day and so do most of my clients. Load varies from 400 watts to 2500 watts for hours at a time
@@drsolar for example, this is a 5kw inverter right,
So if we put all the load on it I mean all the 5kw on it, so is that will still run for few hours.
All I mean is can we run water heaters and room heaters for few hours.
Water heater is 2000W and room heater is also 2000W.
I hope you got my mean!
@@veed_official yes you can as long as you have the battery to support it
@@drsolar thank you so much....
Wao, is there any way to reduce the voice in the fan
No. It comes on and off. You can put some insulation on the wall that will absorb the sound,
@@drsolar Noted
I have a Deye inverter that says mppt can take 13a each from the panels. Will I destroy the inverter if I use panels rated at 15amps?
No you won't. WIth losses the panels will never see 15 amps
what do you think about felicity vs Deye?
I don't. They don't occupy the same space. Thank you for watching and commenting. please don't forget to subscribe
@@drsolar you mean deye is better than felicity? Thanks you. I have subscribed
@@odoohub5010 Felicity is a lower end product relative to Deye
3 Years in, still functioning for you?
Thank for watching, Yes it is.
What's that grey box under inverter ?
it is a custom built box that has my AC wires and changeover. Thanks for watching and commenting
Dr Solar, can you give more detsils on your change over box? Thanx
Hi, what is the idle power consumption of this inverter?
About 60 watts
@@drsolar9t
Tr ret r r r r rest r 1:18 1:22 ft st were 5 y y 1:47 d7dty it😅r ttr yet y
@@drsolary4e85 r 7 ret 9
Do you have this inverters in stock?
Sold out till January. Thanks for watching
Hi Dr Solar. Is the Deye able to switch the generator off again and return to inversion when it recognizes the batteries are charged? Also can it choose between switching on generator or the grid to manage loads and charge the batteries. Would I need to only have either the grid or a generator and not both as how would it differentiate the two?
Thank you for watching and commenting. The system will look for the grid first. If you have checked the generator charge and are using the dry contact it will start and stop the generator based on parameters you set. Sadly it won't switch to the grid if the grid comes.
@@drsolar Thank you for the reply understood. Another question. Does the Deye and Sunsynk program in exactly the same way as I know it’s the same company but is the menu profile and set ups identical?
@@lennieadi Sunsynk is running a different interface and menu.
@@drsolar OK. Thank you for your reply and expert knowledge. So that begs the question. Which of the two of those brands in a 8kw and parallel configuration would you choose. I hope to have 2 x8kw for myself and 3 in parallel for 3 upper floor apartments pray God to supply me with the health and wealth to build the whole building in Jamaica.
@@drsolarI want to buy two 10kw and parallel them with my techfine inverter. My only concern is knowing if they are durable, please let me know how they are holding up over the years
Good day boss....I actually wNt to upgrade to lithium batteries nd hybrid inverter like this one... ease I need to possibly come to your office for good understanding on how it works....can you share your contact with me...am also in lagos
please email me at drsolar@atlanticwastepower.com
Plz tell me price of this inverter
We are not n the same market so I am not sure the price applies. Thank you for watching and commenting
I don't see prices online for the 3.6 one
I am not sure that they post prices online for their products. And in Africa we tend to think that bigger is better
@@drsolar How much did you buy it at?
@@swalehahmed2170 I get dealer pricing that you are not able to get
@@drsolar yes how much?
@@swalehahmed2170 sorry can't disclose that online. Send me an email and I will quote you pricing
That sound is not normal, take it back, also you have installed it to close to the wall on the right
Thanks for the heads up. Thanks for watching and commenting and please don't forget to subscribe.
Yes, the fan is very annoying. I could not continue watchimg the video.
Because of the fan? Thank you for watching and commenting. You know that you could mute that segment?
Take it back the fun not normally that loud
Thank you for watching and commenting. The fan noise is normal. It is that loud because it is indoors. Please don't forget to subscribe.
Hi, nice review. I would like you to send me pricing details. What's your email address ? Whats the WECO appliance on the right ?
info@atlanticwastepower.com
I had to come to the scene of the crime.
Welcome back