Why don't you put these instructions in with the unit so I don't have to go looking for them online. I paid $200 Canadian for the 4" fan kit and it comes with no instructions. Brilliant
Just got a 6 inch fan and carbon filter kit direct from MarsHydro. Works great, low noise and keeps the smell and temperature under control. All for a killer price. Best of the best.
The exhaust fan I got with my 4 x 4 growing tent doesn’t have the humidity/temp controller. It’s basically a worthless fan so I have to buy a brand new one. The videos from my grow tent showed a fan with a controller. Why one exists without I will never know. Thanks Mars Hydro for making me have to buy a second fan with a controller.
As the control unit has 2 inputs for fans i recon you could buy a second fan/filter and use it with the same controller. Kinda special use case but then u wouldn't need 2 control units.
Je me demande si le mode automatique gère vraiment la vitesse de l'extracteur ou si on est obligé de choisir soit même la vitesse avant la régulation ??
Can you cut the aluminium tube that get´s outside of the tent cause then it would not be hanging out of it and would look clean? Or is it important to not cut it? thank you for the Video just ordered
Not a good demo to show hanging up the fan at all. You looped it twice but didn't even show it, took 15 minutes of struggling and rewatching this 10 times to see that you guys did that but just cut the footage for whatever reason. Be more in depth
This doesn’t help me. For starters they sent me a CF that is twice the size of that and slides off the intake every time. The instructions for these are absolute dogshit.
Q: why not connect the filter directly to the fan, and from the fan directly to Sargent Stadanko's office window? Q: can fan/filter be oriented vertical? Q: why will this product not work without wifi?
disagree bigly. for hundreds of years, a bill of materials told you what was what, and what's missing. a brain-dead app does not. when a vendor says the new, improved fan has a metal base and what's delivered do not, customer support costs dilute profits. *PUT A BILL OF MATERIALS IN THE BOX.*
Buy an indoor/outdoor thermometer and wall mount outside your grow tent. Install the outdoor probe inside your grow tent... Fan Speed - you have to play around with it a little bit... Generally adjust your fan speed to keep the temperature inside your grow tent 1 degree to 2 degrees higher than the room temperature is about the best you can get.
i wish you guys sent out humidifiers and heater fors 2x2 tents so i could test out full marshydro stuff i have the tent light and fan and filter just need the other 2
The auto mode only allows one trigger right? Or does it take in account all the high/low settings? Just got my fan and it seems to be randomly blowing. I set up the 'high humidity' to 80%, but even when it's far under, it keeps blowing. Also why is the high hum lower than the low hum in this video?
@@rpwjoho1955 No worries.😊 If you have any questions regarding the operation or function of the fan, just don't hesitate to contact our service team at service@mars-hydro.com
Hi, I understand what the high temp and high humidity triggers do… but what do the low triggers do? So the high turns fan on if humidity and temp are high… but what does it do when they fall too low below the low settings? Does it turn on again?
@@MarsHydro_officialok thanks but can the fan run before the auto triggers on, a defualt fan speed set in off mode so that the fan is never off, yet kicks in 100% when triggered ???
I have an fc3000, sp150 and 4" fan. When are y'all gonna come out with a light control like like other light companies? One with sunrise and sunset functions and environmental data collection functions?
@@nekojackk97 that's just personal preference. A fan inside the tent is a bit quieter than outside. Usually, the fan gets placed outside the tent if you are a bit short in space. But there are no real advantages/disadvantages for any set-up
If you want to get full CFM of your fan... for best ventilation for your grow tent it is more important to eliminate 90 degree turns and bends in the flex duct work... and avoid at all costs a U bend...
Just bought one with the torch screen controller and i think mine might be faulty when in auto mode the fan dont run at all until high temp settings is reached is this faulty?
Hello, MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.If your planting requires humidity, it is recommended that you purchase a humidifier
Hi, i have the 6inch one with speed controller looking to upgrade with the thermostat controller is it possible to buy the control unit separately as i already have the inline fan and filter. Thank you
I bought my light from Mars Hydro, but my grow kit from China. I have a very sturdy exhaust & carbon filter, but there is no temperature control. Do you consider this to be essential?
Hello! No problem! Would you mind sending a video of that issue and email it to [solutions@mars-hydro.com] ? Our solutions team are willing to help fix it!
I think my mars hydro 4” in-line fan may be broken. The controller doesn’t display an “on” or an “off” and only shows the temperature, humidity, and speed (0). When I press the mode and leaf button for 5 seconds, it only locks it. The other buttons beep when it is in lock mode, but otherwise do nothing. Am I missing something?
There might be an issue. Don't worry, please take a video and send it to solutions@mars-hydro.com our service team and engineers will help you to figure it out.
Don't worry you can enter the calibration screen to modify the actual data. And if it keeps getting wrong, feel free to contact our service team (solutions@mars-hydro.com) with your order number. Our team will help you solve it!
Hello, at 2:50 how do you exit the rectifying mode? After i calibrate, i cannot exit, the humidity display keeps blinking. Whatever button i tried it's always stuck in rectifying mode.
Hello! Would you mind sending a video of that issue and email it to [solutions@mars-hydro.com] ? Our professional customer service team will provide you with solutions~
@@Rederz12 After receiving your letter, we will provide you with a solution within 24 hours, please rest assured that the problem will always be resolved~
@@MarsHydro_official great to know thank you. I dont believe its faulty in anyway i just think ive either done something wrong or not done something lol
Yes i have set a temperature and humidity trigger. But when it gets to that point the fan turns completely off. I like it to stay on on at least fanspeed 1. But is always goes completely off. I found something on the internet and they say you should set a fanspeed in off mode. Bit that doesn’t seem te work. Can you please explain how to set a minimum fan speed when the temperature is within parameters? Thanks alot.
I’m having this same issue. It’s stuck on the screen and doesn’t say on or off. Only the temperature, humidity, and speed (0). When I press the mode and lead button for five seconds, all it does is lock it. Think it may be broken. I’ve had it less than a year.
Hello, what is the name of the cable connector you use to connect to the thermostat controller? I need to get an extension as the cable provided isn't long enough for where I want to place the thermostat display. Thank you 😀
the fuck, why dont you attach instruction to the set up, I have just spent 800 euros and form this movie cannot figure out which direction put the equipment
Never buying from these guys again on my momma. Customer service was horrible and how do you malfunction in less than 6 months? Doesn't do anything to control my environment at all. I have pictures and my humidity is at 93rh at night in the basement? C'mon, guys. Hit up somebody different or you'll regret it
We have warranty service, please contact our helpful customer service team [Consultation: info@mars-hydro.com], they will help you solve the problem of the lamp~
Y’all should show the part how your tents stitching catastrophically fails very soon after purchase and you guys not offering/upholding a warranty to the customers so they are stuck buying the same thing multiple times due to your crappy quality and no warranty! If your considering mars hydro, go somewhere else that will at least warranty their gear for at least a year because these guys will leave you hanging with nothing but a tent that you can’t even use. I have proof if anyone wants to see. :)
hi, is the 4 inch fan sufficient for a 2x2? (two very "scented" plants inside!). Does the fan model with the smart function for use with the Mars Hydro app work well as a thermostat? Has anyone had the chance to try it?
Why don't you put these instructions in with the unit so I don't have to go looking for them online. I paid $200 Canadian for the 4" fan kit and it comes with no instructions. Brilliant
Just got a 6 inch fan and carbon filter kit direct from MarsHydro. Works great, low noise and keeps the smell and temperature under control. All for a killer price. Best of the best.
Thank you
@@MarsHydro_official Mars Hydro will not honor warranty claims
The exhaust fan I got with my 4 x 4 growing tent doesn’t have the humidity/temp controller. It’s basically a worthless fan so I have to buy a brand new one.
The videos from my grow tent showed a fan with a controller. Why one exists without I will never know. Thanks Mars Hydro for making me have to buy a second fan with a controller.
As the control unit has 2 inputs for fans i recon you could buy a second fan/filter and use it with the same controller. Kinda special use case but then u wouldn't need 2 control units.
I do have one of your inline fan I bought on Amazon awhile back works great cleaning and moving the air and very quite easy setup highly recommend.
Thank you:)
@MarsHydro_official do you have a video out for the 6 inch smart inline set up fan kits?
I got this same setup with the marshydro 4x4 and the FC-E4800. Love it!!!
Filter does a awesome job at absorbing the unwanted smells.
😁That's great! Happy growing!
Mars Hydro will not honor warranty claims
I had an issue and they sent me and entire filter set up as a replacement,
So I can set the temperature I want in the tent and the controller also keeps the tent at 22 degrees?
Look good ! Nice setup will be recomand your products 🥦👍🌞love CanmarryGrow
Please make your own version of the new AC Infinity 69 controller!! 🙏🙏
The a.c. infinity 69 controller will only control a.c. fans?
What do I have to do with da coal bag inside the filter?
Replacement active carbon, after ~1-3 grows you should change it, or as soon as it won't filter the smell anymore
Just ordered the 6" with temp control and a FC-E 4800... Im hella excited
Thanks! Happy growing
Je me demande si le mode automatique gère vraiment la vitesse de l'extracteur ou si on est obligé de choisir soit même la vitesse avant la régulation ??
Can you cut the aluminium tube that get´s outside of the tent cause then it would not be hanging out of it and would look clean? Or is it important to not cut it? thank you for the Video just ordered
Not a good demo to show hanging up the fan at all. You looped it twice but didn't even show it, took 15 minutes of struggling and rewatching this 10 times to see that you guys did that but just cut the footage for whatever reason. Be more in depth
There are specific installation instructions in the package, and the video is only auxiliary~
@@MarsHydro_official Why post a video if you aren't going to physically explain it
@@lamira463 because it's fake doesn't work as stated
@@sheep.herder It works as intended, it’s just a bitch to hang up which they don’t show. Wouldn’t have gotten it if I knew that prior
This doesn’t help me. For starters they sent me a CF that is twice the size of that and slides off the intake every time. The instructions for these are absolute dogshit.
does anyone have a better setup guide for the smart ventilation monitor?
U found something? Im still trying to figure out
@@viktorvaughn6595you figured it out ?
Hell yea let's go MARS GETTING IT DONE
So I can set the temperature I want in the tent and the controller also keeps the tent at 22 degrees?❤
That's my next purchase 👍 Keep up the great job Mars Hydro 👍
Awesome! Thank you!
Q: why not connect the filter directly to the fan, and from the fan directly to Sargent Stadanko's office window?
Q: can fan/filter be oriented vertical?
Q: why will this product not work without wifi?
Very easy to install the new kits! Love it!
disagree bigly. for hundreds of years, a bill of materials told you what was what, and what's missing. a brain-dead app does not.
when a vendor says the new, improved fan has a metal base and what's delivered do not, customer support costs dilute profits.
*PUT A BILL OF MATERIALS IN THE BOX.*
I have Problem with switching from Fahrenheit to celcuis. It Work the First time, but know it doesnt change.
i don't have the thermostat controller, i have a knob that control the speed of the fan, how fast should i put it and why ?
Buy an indoor/outdoor thermometer and wall mount outside your grow tent. Install the outdoor probe inside your grow tent... Fan Speed - you have to play around with it a little bit... Generally adjust your fan speed to keep the temperature inside your grow tent 1 degree to 2 degrees higher than the room temperature is about the best you can get.
i wish you guys sent out humidifiers and heater fors 2x2 tents so i could test out full marshydro stuff i have the tent light and fan and filter just need the other 2
Great video Great concert
Thanks for coming
My Fan does Not Start Running After Setting the values, it stays at the manual settet Fan Speed. Please help
Hola, los controladores de temperatura son compatibles para todos los extractores de Mars Hydro ? Gracias
I want to run the fan 24/7 in low speed, but if used auto mode it only runs when alarm settings reached. How is it possible to use both?
How to change from F to Celsius?
Google
Are you supposed to remove the felt cover that's on the filter or leave it on?
Great video and also a great product 100%😀
Mars Hydro will not honor warranty claims
would have been better if someone talked you thru it instead of the music.
Thank you! We're trying to include a human voice in our videos!
The auto mode only allows one trigger right? Or does it take in account all the high/low settings? Just got my fan and it seems to be randomly blowing. I set up the 'high humidity' to 80%, but even when it's far under, it keeps blowing. Also why is the high hum lower than the low hum in this video?
Hi, when in "Auto" mode, the fan allows 4 triggers to be active at the same time. Please check if a "low humidity" trigger was set in your fan.
@@MarsHydro_official oh wow I did not understand that! Thanks a lot 🙏🏻
@@rpwjoho1955 No worries.😊 If you have any questions regarding the operation or function of the fan, just don't hesitate to contact our service team at service@mars-hydro.com
Hi, I understand what the high temp and high humidity triggers do… but what do the low triggers do? So the high turns fan on if humidity and temp are high… but what does it do when they fall too low below the low settings? Does it turn on again?
What speed does the fan run at in auto mode when the triggers are exceeded ? is it auto 100% power or is it what fan speed we set in the on mode ????
100% power
@@MarsHydro_officialok thanks but can the fan run before the auto triggers on, a defualt fan speed set in off mode so that the fan is never off, yet kicks in 100% when triggered ???
@@travisanthony11 This feature is not currently available. The way it works in each mode is fixed.
I have an fc3000, sp150 and 4" fan. When are y'all gonna come out with a light control like like other light companies? One with sunrise and sunset functions and environmental data collection functions?
Research in progress :)
@@MarsHydro_official just ordered my Mars hydro master control, I hope this thing is worth the $100.
@@dr.gheese6768 nope, it isn’t, in my experience. How’s your purchase going?
Can someone tell me the difference or affect of Filter Inside, fan outside grow tent vs fan&filter inside grow tent
Or why is it your preferred method??
@@nekojackk97 that's just personal preference. A fan inside the tent is a bit quieter than outside. Usually, the fan gets placed outside the tent if you are a bit short in space. But there are no real advantages/disadvantages for any set-up
There's no difference except inside you don't have as much head space.
If you want to get full CFM of your fan... for best ventilation for your grow tent it is more important to eliminate 90 degree turns and bends in the flex duct work... and avoid at all costs a U bend...
I have the first version of that in a 4x4 is that one more quiet or is it the same ?
#MARSHYDRO 💯✌
Just bought one with the torch screen controller and i think mine might be faulty when in auto mode the fan dont run at all until high temp settings is reached is this faulty?
Please contact our after-sales team, they will help you solve this problem【solutions@mars-hydro.com】
Got the Same Problem, help please
I'm new grower. After having this product do i need another humidifier and dehumidifier devices?
Hello,
MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.If your planting requires humidity, it is recommended that you purchase a humidifier
Is it safe for everyone in europe buy your grow lights in Mars hydro eu? That site Belongs to you as well?
Yes, it's our branch site. You can find all our direct sites in the video description!
Hi!, is there any physical store so I can buy this complete pack in San Diego or LA?:)
Sure. We have partner distributors. You can email us at info@mars-hydro.com to find an authorized dealer near you.
Great, thank you!
Hi, i have the 6inch one with speed controller looking to upgrade with the thermostat controller is it possible to buy the control unit separately as i already have the inline fan and filter. Thank you
Fans with speed controllers and touch screen controllers are not applicable
Hey is the smaller version good in 60x60x140 cm and how quiet it is in this small tent for with good airflow? Im about to buy this fine product
We have a 4-inch inline fan filter combo that could fit your tent and it's 28dbA.
shame this cannot be mounted to the front of the tent like the infinity because i dont want to put holes into my wall to install the controller.
What are the plug connections called out one and the sensor. My cables aren't long enough need an extension
Feel free to email our support team: solutions@mars-hydro.com for the info!
I bought my light from Mars Hydro, but my grow kit from China. I have a very sturdy exhaust & carbon filter, but there is no temperature control. Do you consider this to be essential?
If you are a newbie and can't monitor the temperature well, it is recommended that you install a temperature controller~
Hey every time I plug the jacks completely in I get a beeping noise and can’t set temp or humidity HELP ME PLEASE
Hello! No problem! Would you mind sending a video of that issue and email it to [solutions@mars-hydro.com] ? Our solutions team are willing to help fix it!
So you can connect more than one inline fan to the controller?and what do you do for air tocome in the tent if you don't want light to escape?
Up to 2 line fans can be connected to the controller.😊
@@MarsHydro_official thank you but what about intake?do you need a second fan if you want it so no light escapes?
I think my mars hydro 4” in-line fan may be broken. The controller doesn’t display an “on” or an “off” and only shows the temperature, humidity, and speed (0). When I press the mode and leaf button for 5 seconds, it only locks it. The other buttons beep when it is in lock mode, but otherwise do nothing. Am I missing something?
There might be an issue. Don't worry, please take a video and send it to solutions@mars-hydro.com our service team and engineers will help you to figure it out.
I seem to be getting wrong reading's. Anybody else having issue's getting wrong humidity and temperature Reading's?
Don't worry you can enter the calibration screen to modify the actual data. And if it keeps getting wrong, feel free to contact our service team (solutions@mars-hydro.com) with your order number. Our team will help you solve it!
junk
Can you buy the controller alone, if I already bought a different kit without it
Hello sorry we don't sell the controller separately.
Hello, at 2:50 how do you exit the rectifying mode? After i calibrate, i cannot exit, the humidity display keeps blinking. Whatever button i tried it's always stuck in rectifying mode.
Leave it for 5 seconds.
FC6500 light would be awesome for ME and my first grow!!! Especially when we poor!
Hi, can it work 24 hours a day?
Sure. Work as long as you wish.
Would this be ok for a 4x8
You will need two
@@MarsHydro_official thank you I got an email. Ima start with two and probably upgrade as time goes by. Ty guys for the code!!
@@stephenohara6298 Appreciate it! Happy growing!
Hi Mars Hydro team, does the fan kit come with an EU plug if I order from the European website?
If your delivery address is in Europe, the package will be sent from the local warehouse and equipped with EU plug
Comment choisir l’extracteur en fonction de sa chambre ? J’ai une 100x100x180 merci
Un ventilateur de 4" est suffisant.
@@MarsHydro_official impeccable je viens de passé commande 👌
do you still need a mini fan inside if you have this kit?
yes
How quiet is compared to AC infinity?
The noise levels of the two Marshydro fans are as follows, you can refer to:
4Inline fans: 26.8dB-A
6Inline fan: 32dB-A
I would love to win the FC6500 BUDZ😍
I have the new version and my auto mode doesnt seem to change fan speeds when it goes above high or below low. Not sure if ive missed something
Hello! Would you mind sending a video of that issue and email it to [solutions@mars-hydro.com] ? Our professional customer service team will provide you with solutions~
@@MarsHydro_official i emailed support a few days ago but heard nothing back will try this email. Thank you.
@@Rederz12 After receiving your letter, we will provide you with a solution within 24 hours, please rest assured that the problem will always be resolved~
@@MarsHydro_official great to know thank you. I dont believe its faulty in anyway i just think ive either done something wrong or not done something lol
@@Rederz12 what was the issue ? I have the same problem
cool its A/C Infinity that just says mars hydro instead
I bought this fan, i like it to be at a minimum of 1 fan speed. But it turns off. How can i change this?
Sure. Kindly check if you have set a temperature or humidity trigger in the auto mode.
If not, please leave the fan in on mode, and then adjust the fan speed to the minimum.
Yes i have set a temperature and humidity trigger. But when it gets to that point the fan turns completely off. I like it to stay on on at least fanspeed 1. But is always goes completely off. I found something on the internet and they say you should set a fanspeed in off mode. Bit that doesn’t seem te work. Can you please explain how to set a minimum fan speed when the temperature is within parameters? Thanks alot.
@Shu Lin unfortunately it cannot be solved
@@masterbeuner8964did you figure this out
Blades face the filter or duct?
Duct~
Do I keep the mars hydro bag on the carbon filter?
Do you mean the white outer cover on the outside of the filter?
@@MarsHydro_official yes that’s exactly what I mean shouldn’t I take it off?
@@rocboyfinesse8144 No, don't take it off. This is used to prevent the powdered charcoal from falling off to your plants.
you smoke too much weed if you need these kind of training videos 😁😁😁
Lol
❤️🙌
🙌🙏
I can't seem to get the rectify mode to work on the controller. What am I doing wrong?
Keep the fan in "OFF" mode. And to enter the calibration needs at least 5 seconds.
@@MarsHydro_official All it does is lock the screen.
@@MarsHydro_official Just to confirm how do I enter calibration mode?
@@seantrini 1.In "OFF MODE" 2.Press "MODE BUTTON" & "LEAF BUTTON" for at least 5 seconds.
I’m having this same issue. It’s stuck on the screen and doesn’t say on or off. Only the temperature, humidity, and speed (0). When I press the mode and lead button for five seconds, all it does is lock it. Think it may be broken. I’ve had it less than a year.
Hello, what is the name of the cable connector you use to connect to the thermostat controller?
I need to get an extension as the cable provided isn't long enough for where I want to place the thermostat display.
Thank you 😀
Contact our customer service team for related questions, they will help you :info@mars-hydro.com
@@MarsHydro_official Thank you 😀
How much money?
You can check out our website for the price. There're different sizes and configurations.
Running on 100% you think a jet fighter starts right next to you. Best price but low quality
the fuck, why dont you attach instruction to the set up, I have just spent 800 euros and form this movie cannot figure out which direction put the equipment
Mars Hydro will not honor warranty claims
Never buying from these guys again on my momma. Customer service was horrible and how do you malfunction in less than 6 months? Doesn't do anything to control my environment at all. I have pictures and my humidity is at 93rh at night in the basement? C'mon, guys. Hit up somebody different or you'll regret it
My fan isn't running at all. I was sent here by the website. Avoid this junk at all cost. I had it for like 3 months.
We have warranty service, please contact our helpful customer service team [Consultation: info@mars-hydro.com], they will help you solve the problem of the lamp~
they'll take your money first, then good luck with support
Yay, nothing. Never buying from them again
Y’all should show the part how your tents stitching catastrophically fails very soon after purchase and you guys not offering/upholding a warranty to the customers so they are stuck buying the same thing multiple times due to your crappy quality and no warranty! If your considering mars hydro, go somewhere else that will at least warranty their gear for at least a year because these guys will leave you hanging with nothing but a tent that you can’t even use. I have proof if anyone wants to see. :)
hi, is the 4 inch fan sufficient for a 2x2? (two very "scented" plants inside!). Does the fan model with the smart function for use with the Mars Hydro app work well as a thermostat? Has anyone had the chance to try it?